How can i configure fence_cisco_ucs with redhat cluster suite
HI
How can i configure fence_cisco_ucs with redhat cluster suite.
i was trying to configure fencing aganet with red ahat cluster suite
i issued command
# /usr/sbin/fence_vmware_soap -a 172.22.90.61 -l admin -p duc2Cisco -o reboot
then i got below error:
Failed: You have to enter plug number
Please use '-h' for usage
what is this plug number and from where can i get this plug number.?
I am new to this Cisco UCS, becuase this hardware is provided my some other team and i am the one installing Red Hat cluster suite. I requested fencing agent configuration with Cisco, and that guy dosen't know what is fencing..
please help me, because of this issue, production got delayed
Hello Experts,
Please help me with the exact steps on configuring two node cluster on RHEL 6.2,
I failed to configure the simplest cluster by below steps,
1- install RHEL 6.2 64-bit on both nodes
2- add to hosts file of each server ( 1 IP in local NW and another in IP private NW).
x.x.x.x ... (1 Reply)
Hi,
is it normal, that the IP alias (service IP) can't be seen with ifconfig -a , as eth0:1 for example
the IP is on the node, you can ping it, and open ports for that IP
look at this:
# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue
link/loopback... (4 Replies)
Hi Friends,
I am trying to configure redhat high availability cluster on rhel5 32bit.
As i am not having the RHN subscription, I have to intsall all the cluster suite manually. I am not aware what all are the rpms needs to be installed. Please let me know about the rpms needs to be installed.... (3 Replies)
Hi,
I am configuring the sun cluster between two nodes. It is asking me to create a filesystem called globaldevices in root and mount it permanently. I created a new slice c0t0d0s3 and created a filesytem /globaldevices. How can I mount it permanently. I know we have to do it /etc/vfstab, but... (3 Replies)
Hi Gurus,
For learning purpose, I have installed a single node cluster 3.2 on Solaris 10 for practice. Now I am welling to create two non-global zone and create them as a fail over. Will appreciate your help and assistance.
Thanks (3 Replies)
Hi,
I am relatively new to Sun Solaris. I am installing 2 node cluster and when I was installing cluster suite 3.2 2/08, it is giving me this error as "Conflict - Incomplete version detected".
Please help me in this regard and also suggest me any valuable point to consider before going ahead... (3 Replies)
Hi,
I have a Redhat Cluster Suite with 2 nodes, using option "Multicast HeartBeating" on clumembd, whith default IP: 225.0.0.11
The cluster member names are:
# grep node /etc/hosts
192.168.100.1 node1
192.168.100.2 node2
My problem is that the Multicast IP is relating to other network... (1 Reply)
cmdeleteconf(1m)cmdeleteconf(1m)NAME
cmdeleteconf - Delete either the cluster or the package configuration
SYNOPSIS
cmdeleteconf [-f] [-v] [-c cluster_name] [[-p package_name]...]
DESCRIPTION
cmdeleteconf deletes either the entire cluster configuration, including all its packages, or only the specified package configuration. If
neither cluster_name nor package_name is specified, cmdeleteconf will delete the local cluster's configuration and all its packages. If
the local node's cluster configuration is outdated, cmdeleteconf without any argument will only delete the local node's configuration. If
only the package_name is specified, the configuration of package_name in the local cluster is deleted. If both cluster_name and pack-
age_name are specified, the package must be configured in the cluster_name, and only the package package_name will be deleted. cmdelete-
conf with only cluster_name specified will delete the entire cluster configuration on all the nodes in the cluster, regardless of the con-
figuration version. The local cluster is the cluster that the node running the cmdeleteconf command belongs to.
Only a superuser, whose effective user ID is zero (see id(1) and su(1)), can delete the configuration.
To delete the cluster configuration, halt the cluster first. To delete a package configuration you must halt the package first, but you do
not need to halt the cluster (it may remain up or be brought down). To delete the package VxVM-CVM-pkg (HP-UX only), you must first delete
all packages with STORAGE_GROUP defined.
While deleting the cluster, if any of the cluster nodes are powered down, the user can choose to continue deleting the configuration. In
this case, the cluster configuration on the down node will remain in place and, therefore, be out of sync with the rest of the cluster. If
the powered-down node ever comes up, the user should execute the cmdeleteconf command with no argument on that node to clean up the config-
uration before doing any other Serviceguard command.
Options
cmdeleteconf supports the following options:
-f Force the deletion of either the cluster configuration or the package configuration.
-v Verbose output will be displayed.
-c cluster_name
Name of the cluster to delete. The cluster must be halted already, if intending to delete the cluster.
-p package_name
Name of an existing package to delete from the cluster. The package must be halted already. There should not be any
packages in the cluster with STORAGE_GROUP defined before having a package_name of VxVM-CVM-pkg (HP-UX only).
RETURN VALUE
Upon completion, cmdeleteconf returns one of the following values:
0 Successful completion.
1 Command failed.
EXAMPLES
The high availability environment contains the cluster, clusterA , and a package, pkg1.
To delete package pkg1 in clusterA, do the following:
cmdeleteconf -f -c clusterA -p pkg1
To delete the cluster clusterA and all its packages, do the following:
cmdeleteconf -f -c clusterA
AUTHOR
cmdeleteconf was developed by HP.
SEE ALSO cmcheckconf(1m), cmapplyconf(1m), cmgetconf(1m), cmmakepkg(1m), cmquerycl(1m).
Requires Optional Serviceguard Software cmdeleteconf(1m)