Home Man
Search
Today's Posts
Register

Linux & Unix Commands - Search Man Pages

RedHat 9 (Linux i386) - man page for sane-nec (redhat section 5)

sane-nec(5)			       File Formats Manual			      sane-nec(5)

NAME
       sane-nec - SANE backend for NEC scanners

DESCRIPTION
       The  sane-nec  library  implements  a SANE (Scanner Access Now Easy) backend that provides
       access to NEC SCSI scanners.  This backend should be  considered  alpha-quality	software!
       In  the	current  state it is known to work with PC-IN500/4C scanners. Another MultiReader
       scanner series is not supported. PC-IN 500/4C and MultiReader scanner  are  only  sold  in
       Japan.(except Multi Reader PetiScan.)

       For other scanners, it may or may not work.

       The backend has the following known problems:
	      - ColorLineart mode is not supported.
	      - device name is fixed to /dev/scanner

       At present, the following scanners are known to work with this backend.
	      Vendor Product id
	      ------ -----------
	      NEC    PC-IN500/4C

FILES
       /etc/sane.d/nec.conf
	      The backend configuration file.

       /usr/lib/sane/libsane-nec.a
	      The static library implementing this backend.

       /usr/lib/sane/libsane-nec.so
	      The  shared  library  implementing  this	backend  (present on systems that support
	      dynamic loading).

ENVIRONMENT
       SANE_DEBUG_NEC
	      If the library was compiled with debug support enabled, this  environment  variable
	      controls the debug level for this backend.  E.g., a value of 128 requests all debug
	      output to be printed.  Smaller levels reduce verbosity.

SEE ALSO
       sane(7), sane-scsi(5)

AUTHORS
       Kazuya Fukuda

					   17 Feb 2000				      sane-nec(5)


All times are GMT -4. The time now is 11:06 AM.

Unix & Linux Forums Content Copyrightę1993-2018. All Rights Reserved.
UNIX.COM Login
Username:
Password:  
Show Password