Linux and UNIX Man Pages

Linux & Unix Commands - Search Man Pages

ei(4) [netbsd man page]

EI(4)							   BSD Kernel Interfaces Manual 						     EI(4)

NAME
ei -- Acorn AKA25 (Ether1) Ethernet driver SYNOPSIS
ei* at podulebus0 slot ? DESCRIPTION
The ei driver provides access to a 10 Mb/s Ethernet network through an Acorn AKA25 Ethernet card (also known as ``Ether1'' after its RISC OS driver). The card is based on the Intel 82586. Media selection on the AKA25 is through links on the board (LK3-LK8 and LK10), so there are no media options available through the driver. SEE ALSO
netintro(4), podulebus(4), ifconfig(8) BSD
October 22, 2006 BSD

Check Out this Related Man Page

PODULEBUS(4)						   BSD Kernel Interfaces Manual 					      PODULEBUS(4)

NAME
podulebus -- Acorn Expansion Card bus driver SYNOPSIS
podulebus0 at ioc0 bank 4 (NetBSD/acorn26) podulebus0 at root (NetBSD/acorn32) DESCRIPTION
The podulebus driver handles the expansion-card interface in Archimedes machines and their successors. This includes conventional expansion cards, mini expansion cards (as introduced in the A3000), network expansion cards (as introduced in the A3020), DEBI expansion cards (as introduced in the Risc PC), and Mk II network cards (also introduced in the Risc PC). Drivers for individual cards attach as children of the podulebus device. NetBSD includes several machine-independent expansion card device drivers. There are also some device drivers which are specific to NetBSD/acorn26 or NetBSD/acorn32. HARDWARE
The following devices are supported by NetBSD. SCSI interfaces asc Acorn AKA30, AKA31, and AKA32 SCSI expansion cards (NetBSD/acorn32). cosc MCS Connect32 SCSI interface (NetBSD/acorn32). csa Cumana 8-bit SCSI interface (NetBSD/acorn32). csc Cumana 16-bit SCSI interface (NetBSD/acorn32). hcsc HCCS 8-bit SCSI interface. oak Oak SCSI interface. ptsc Powertec SCSI interface (NetBSD/acorn32). sec Acorn AKA30, AKA31, and AKA32 SCSI expansion cards. Disk controllers dtide D.T. Software IDE controller. hcide HCCS IDE controller. icside ICS IDE controller (NetBSD/acorn32). rapide Yellowstone Educational Solutions RapIDE IDE controller (NetBSD/acorn32). simide Simtec IDE controller (NetBSD/acorn32). Network interfaces ea Atomwide A-10xx and Acorn AEH54 Ethernet cards (Ether3). eb Atomwide and ANT network-slot and Acorn AEH61 Ethernet cards (EtherB). eh i-cubed EtherLan 100-, 200- and 500-series, and Acorn AEH75, AEH77, and AEH79 Ethernet cards (EtherH) (NetBSD/acorn26). ei Acorn AKA25 Ethernet card (Ether1). ie Acorn AKA25 Ethernet card (Ether1) (NetBSD/acorn32). ne Various vaguely NE2000-compatible Ethernet cards (NetBSD/acorn32). Serial interfaces amps Atomwide multi-port serial interface (NetBSD/acorn32). SEE ALSO
acorn26/eh(4), acorn32/asc(4), acorn32/cosc(4), acorn32/csc(4), acorn32/ie(4), acorn32/ptsc(4), dtide(4), ea(4), eb(4), ei(4), hcide(4), ne(4), oak(4), sec(4) BUGS
Too few drivers are shared between NetBSD/acorn26 and NetBSD/acorn32. BSD
October 26, 2006 BSD
Man Page

13 More Discussions You Might Find Interesting

1. What is on Your Mind?

What if we end up being the bad aliens?

All biological cognitive minds which exist for a fleeting moment in a 20 billion year old universe make cognitive inferences. Most of these cognitive inferences are wrong and are a synthesis of an infinite series of mistaken inferences based on the inability of a biological cognitive mind to... (24 Replies)
Discussion started by: Neo
24 Replies

2. Shell Programming and Scripting

Retreive string between two chars

I want to write a shell script in order to retreive some data from a log file that i have written into. The string that i want to get is the number 2849 (that is located between | | ). To explain further, this is the result i get after running "grep LOGIN filename.log" but i need to get the... (25 Replies)
Discussion started by: danland
25 Replies

3. Shell Programming and Scripting

Weird date difference problem

I am trying to find the difference in days between 2 dates. I have to extract the 1st date from a filename, which i did using the awk command. I have to compare this date to today's date and if the difference is greater than 30 days, do something, else do something else. This is what i wrote... (22 Replies)
Discussion started by: meeraKh
22 Replies

4. Solaris

Sun 6800 - SC's- neither are contactable!

Hi all In a bit of a pickle here and need some help. I have a 6800, with 2 SC controllers. I have a terminal concentrator ( TC ) attached to the serial ports. I cant ping / telnet these sc controllers, and when on the TC, I cant connect into them either. I am able to telnet to other servers... (21 Replies)
Discussion started by: sbk1972
21 Replies

5. Shell Programming and Scripting

retreiving and assigning values and manipulating string in a for loop

Hi I am new to shell scripting and i am preparing a script. for now i am work on a sub part of it..but i am unable to make it work. --- the test code that i am working on -------------------------- IFS="" Sample_eve=`psg proc_s | grep tY` n=0 for line in $Sample_eve... (41 Replies)
Discussion started by: Anteus
41 Replies

6. Shell Programming and Scripting

How do I include the file being compared into calculation?

nawk -F, 'NR==FNR{file=FILENAME;a++;next} a{if(FILENAME~file)next;b++;} END{ for(i in a){if(a && !b){print "NEW: "i}} for(i in b){if(b)print i"\t\t"b}}' OFS=, 123.csv *.csv I need to include 123.csv into the equation for the total output currently it compares whatever is on 123.csv against... (27 Replies)
Discussion started by: llcooljatt
27 Replies

7. Programming

Why do I receive Program received signal SIGABRT, Aborted?

Im using gdb and when a user disconnects from my server I receive a message Program received signal SIGABRT, Aborted. 0x7ffe0304 in ?? () I was hoping someone here might have a explination for this message in gdb (26 Replies)
Discussion started by: Errigour
26 Replies

8. War Stories

Prize of being an Admin

Was wondering if anyone has come across any situation where you do your best to help users and in return you get a nice escalation from top level management! Here's my story: One fine morning, I was sitting idle, doing next to nothing, I got an alert from helpdesk people about a problem with... (30 Replies)
Discussion started by: admin_xor
30 Replies

9. War Stories

Prize of being an Admin - Part 2

I was reading this thread of admin_xor Prize of being an Admin and thought will share this experience of mine which is kind of opposite to what he did - I didn't tell anybody what happened :D We were porting one of the subsystem from Solaris to Linux. As part of that we developed many wrapper... (23 Replies)
Discussion started by: ahamed101
23 Replies

10. AIX

Receiving: 4B436A3D 0313233216 T H fscsi0 LINK ERROR

Hey All, I'm receiving the following error off of a Power5 9133-55A after I write 2-5 files to the LUN: 4B436A3D 0313233216 T H fscsi0 LINK ERROR I can create the filesystem, volume groups etc etc. All goes well until there is sustained activity to the LUN then the above error... (23 Replies)
Discussion started by: Devyn
23 Replies

11. Shell Programming and Scripting

Replace alphabets in a string with their ASCII values

hi. I have a requirement where I need to REPLACE all alphabets from an alphanumeric input string into their respective ASCII decimal value. For example: If the input string is ABAC123, the output should be 65666567123 I am seeking a single line command, and I was trying searching for options... (21 Replies)
Discussion started by: kumarjt
21 Replies

12. Shell Programming and Scripting

Use of expr to calc differenc ein to epoch values

Hi folks, I have a script where i am trying to calc the difference between two epoch dates and then have a condition based on the resultant value. When I run the script it keeps complaining; expr: syntax error ./testdiff.sh: line 11: syntax error in conditional expression ./testdiff.sh:... (25 Replies)
Discussion started by: jonnyd
25 Replies

13. Web Development

Notes with Ravinder on Badging System Development Part II

Part II: Current PHP file Beta 73 Not Optimized: <?php $version = 73; $query = "SELECT * FROM " . TABLE_PREFIX . "user WHERE userid='" . $uid . "'"; $usertable = $db->query_read_slave($query); $modaluser = $db->fetch_array($usertable); $modaluser = gmdate("d F Y", $modaluser); $modaluser... (48 Replies)
Discussion started by: Neo
48 Replies