Solaris

Hey guys

I am into strange problem where I have to integrate cluster and EMC storage for that I have to take 1 NIC port from default nic port present on the server and 3 NIC port from quad card which is also present on the server. Right now I have connect all ports to a network for testing purpose.

Now the problem is when I remove network from either of the three ports present on the Quad card then rest of the ports i.e 2 port from quad card & 1 from inbuilt port present on the server are pinging from the network. But when I remove network from default NIC port present on the server then all rest of the three port from the quad card are also stop pinging from the network.

Could any one help me in solving this problem. What I actually want is, when I remove network from default port present on the server then rest of the three ports present on the quad card should ping on the network

y network config?

thanks for the reply

But could you explain me what should I do as I have config the IP on NIC atleast 200 times. and all are on the same network with IPs given in same series

`ifconfig -a`
`netstat -rnv`
`ls -l /etc/hostname*`
`cat /etc/hostname*`

# cat hosts
::1 localhost
127.0.0.1 localhost
10.2.132.72 north02
10.2.132.73 north021
10.2.132.74 north022
10.2.132.75 north023
10.2.132.74 north02_ce2
10.2.132.75 north02_ce3

# bash
bash-3.00# cat hostname.ce0
north02
bash-3.00# cat hostname.ce1
north021
bash-3.00# cat hostname.ce2
north022
bash-3.00# cat hostname.ce3
north023
bash-3.00# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
ce0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 10.2.132.72 netmask ffffff80 broadcast 10.2.132.127
ether 0:3:ba:9e:90:ed
ce1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
inet 10.2.132.73 netmask ffffff80 broadcast 10.2.132.127
ether 0:3:ba:a1:fc:e0
ce2: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 4
inet 10.2.132.74 netmask ffffff80 broadcast 10.2.132.127
ether 0:3:ba:a1:fc:e1
ce3: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 5
inet 10.2.132.75 netmask ffffff80 broadcast 10.2.132.127
ether 0:3:ba:a1:fc:e2



ls /etc/hostname*
hostname.ce0
hostname.ce1
hostname.ce2
hostname.ce3

Hi group ,please find output of following command# netstat -nrvIRE Table: IPv4 Destination Mask Gateway Device Mxfrg Rtt Ref Flg Out In/Fwd-------------------- --------------- -------------------- ------ ----- ----- --- --- ----- ------default 0.0.0.0 10.2.132.125 1500* 0 1 UG 3 010.2.132.0 255.255.255.128 10.2.132.72 ce0 1500* 0 1 U 293 010.2.132.0 255.255.255.128 10.2.132.73 ce1 1500* 0 1 U 0 010.2.132.0 255.255.255.128 10.2.132.74 ce2 1500* 0 1 U 0 010.2.132.0 255.255.255.128 10.2.132.75 ce3 1500* 0 1 U 0 0224.0.0.0 240.0.0.0 10.2.132.72 ce0 1500* 0 1 U 0 0127.0.0.1 255.255.255.255 127.0.0.1 lo0 8232* 0 4 UH 77 0