02-12-2009
Strange problem need expert advice
Hey guys
I am into strange problem where I have to integrate cluster and EMC storage for that I have to take 1 NIC port from default nic port present on the server and 3 NIC port from quad card which is also present on the server. Right now I have connect all ports to a network for testing purpose.
Now the problem is when I remove network from either of the three ports present on the Quad card then rest of the ports i.e 2 port from quad card & 1 from inbuilt port present on the server are pinging from the network. But when I remove network from default NIC port present on the server then all rest of the three port from the quad card are also stop pinging from the network.
Could any one help me in solving this problem. What I actually want is, when I remove network from default port present on the server then rest of the three ports present on the quad card should ping on the network
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
I¡¯m a network operator, mine is an IBM PC server 320, operating system SCO unix 3.2v4.2, triton 3.1 of Baan. Recently, my server went dead every a few hours, no sign & signal shows malfunction suddenly. It looks like a sudden power failure, but the indicator of main power supply is on. Normal... (1 Reply)
Discussion started by: lyhsm
1 Replies
2. UNIX for Dummies Questions & Answers
I did an installation of Redhat 7.1 and it seem to install smoothly. I go and reboot and I get the following message:
"INIT: Id "x" respawing too fast: disabled for 5 minutes"
The screen flashes 4 times every 10 seconds or so.
I can't seem to figure why this does this. It might be a simple... (2 Replies)
Discussion started by: forjohnny
2 Replies
3. UNIX for Dummies Questions & Answers
Hi..
Some of my application were not running properly due to lack of virtual memory.....so wht i did add one free harddisk as swap file system...and increased the swap memory..
But since than my root file system is showing 100% full thr is no space left...is thr any link between these two..... (1 Reply)
Discussion started by: Prafulla
1 Replies
4. Solaris
I had this working before. I have a 120GB disk with Solaris on the first primary partition, Fedore Core 3 on the second, Slackware on the third, And FreeBSD 5.3 on the 4th. Booting was handled by grub, and everything was working fine.
I decided to wipe everything out and start from scratch... (6 Replies)
Discussion started by: lyonsd
6 Replies
5. Shell Programming and Scripting
I am using SunOS 5.9 and I don't know why all my commands are getting executed as if an extra 'enter' has been pressed.
What could be the reason and how to correct it?
Please help.
Asty (2 Replies)
Discussion started by: Asty
2 Replies
6. SCO
We have an inhouse built application which handles our AR function. We'd like to email statements out of the application directly. My question is this is there a good, solid, command line driven, scriptable Mail Transport Agent that would allow us to send a semi unique email (with a statement and... (1 Reply)
Discussion started by: Maldain
1 Replies
7. Shell Programming and Scripting
Hi I need some major help with eval
I have a statement using eval:
read input
eval variable$input=”something”
Now I want to use the “variable$input” in some commands but I don't know how to call it without replacing the $input with the command line value (which I obviously can't do).
... (1 Reply)
Discussion started by: Cactus Jack
1 Replies
8. Solaris
Hi Gurus
I am facing a problem, there is a folder called /a where there are lots of files which are occupying space anything between 30 GB to 100 GB as I am not able to check the space occupied by that folder through "du -sh /a" command as I don't see any output after more than 1 hour of... (4 Replies)
Discussion started by: amity
4 Replies
9. Shell Programming and Scripting
hello all,
i am having problem in accessing a directory.I dont think its a permission issue.can anyone help me out. I am using korn sell
code:
$ ls -ltr sc*
lrwxrwxrwx 1 essbase essbase 21 Oct 8 2010 sc_ssp -> /work/nfs/nas2/sc_ssp
$ cd sc_ssp
ksh: sc_ssp: not found
$ (6 Replies)
Discussion started by: manid
6 Replies
10. Shell Programming and Scripting
Hi all,
I have written a wrapper script in Perl which will be used on AIX, Linux and Windows and I do not want to change any code for the needs for a specific OS if avoidable.
It works fine so far on all 3 OSes, not blowing up any stacks any more, but I am unsure how to handle writing log files... (7 Replies)
Discussion started by: zaxxon
7 Replies
LEARN ABOUT OPENSOLARIS
auscope
AUSCOPE(1) General Commands Manual AUSCOPE(1)
NAME
auscope - Network Audio System Protocol Filter
SYNOPSIS
auscope [ option ] ...
DESCRIPTION
auscope is an audio protocol filter that can be used to view the network packets being sent between an audio application and an audio
server.
auscope is written in Perl, so you must have Perl installed on your machine in order to run auscope. If your Perl executable is not
installed as /usr/local/bin/perl, you should modify the first line of the auscope script to reflect the Perl executable's location. Or,
you can invoke auscope as
perl auscope [ option ] ...
assuming the Perl executable is in your path.
To operate, auscope must know the port on which it should listen for audio clients, the name of the desktop machine on which the audio
server is running and the port to use to connect to the audio server. Both the output port (server) and input port (client) are automati-
cally biased by 8000. The output port defaults to 0 and the input port defaults to 1.
ARGUMENTS
-i<input-port>
Specify the port that auscope will use to take requests from clients.
-o<output-port>
Determines the port that auscope will use to connect to the audio server.
-h<audio server name>
Determines the desktop machine name that auscope will use to find the audio server.
-v<print-level>
Determines the level of printing which auscope will provide. The print-level can be 0 or 1. The larger numbers provide greater
output detail.
EXAMPLES
In the following example, mcxterm is the name of the desktop machine running the audio server, which is connected to the TCP/IP network
host tcphost. auscope uses the desktop machine with the -h command line option, will listen for client requests on port 8001 and connect
to the audio server on port 8000.
Ports (file descriptors) on the network host are used to read and write the audio protocol. The audio client auplay will connect to the
audio server via the TCP/IP network host tcphost and port 8001:
auscope -i1 -o0 -hmcxterm
auplay -audio tcp/tcphost:8001 dial.snd
In the following example, the auscope verbosity is increased to 1, and the audio client autool will connect to the audio server via the
network host tcphost, while displaying its graphical interface on another server labmcx:
auscope -i1 -o0 -hmcxterm -v1
autool -audio tcp/tcphost:8001 -display labmcx:0.0
SEE ALSO
nas(1), perl(1)
COPYRIGHT
Copyright 1994 Network Computing Devices, Inc.
AUTHOR
Greg Renda, Network Computing Devices, Inc.
1.9.3 AUSCOPE(1)