8 More Discussions You Might Find Interesting
1. HP-UX
I have used ioscan -fnC tape and the system identified the tape drive. what is the command to show a listing of what is on the tape? I have used ls /dev/rmt/rmt0 to no avail. can anyone help?
Thanks in advance (10 Replies)
Discussion started by: Randydog
10 Replies
2. Solaris
Hey folks,
Linux admin here, forced to use Opensolaris to try to use ufsdump/ufsrestore to get some data of some old tapes.
I've got Opensolaris 2009.06 on x86 and a Sony SDX-700V.
As a "control" experiment, I booted the system with a Linux live CD and the tape drive worked perfectly.
... (2 Replies)
Discussion started by: eddy_sysad
2 Replies
3. UNIX for Dummies Questions & Answers
Hi,
i installed a unix tape drive on my alphaserver. when i use a mt command it tells me there is no tape or device.
I have used the hardware manager and it shows the tape is present.
Can anyone help me understand why it cannot pick up the tape as a default? (1 Reply)
Discussion started by: ryks
1 Replies
4. SCO
Hello,
I'm having some issues with installing SCSI tape drive on SCO 5.0.6
hardware config shows the following adapters
%adapter 0xE800-0xE8FF 10 - type=alad ha=0 bus=0 id=7 fts=sto
%adapter 0x0170-0x0177 15 - type=IDE ctlr=secondary dvr=wd
%adapter - 3 - ... (3 Replies)
Discussion started by: ananth_ak
3 Replies
5. AIX
Brothers, I have a question on compatible issues.
I have a p570 server running on AIX5.3.0.0 TL04.
Recently I have received a 3590 tape drive with library and I am wonder whether I can make use of this tape drive for my normal daily backup of AIX 5.3.0.0 in p570 server.
Any driver or adapter... (1 Reply)
Discussion started by: kwliew999
1 Replies
6. UNIX for Dummies Questions & Answers
Hi,
I need to restore my tape backup, when I type "tape status" it gives;
status : ready beginning-of-tape write-protected
soft errors : 0
hard errors : 0
underruns : 3
but... (4 Replies)
Discussion started by: alisevA3
4 Replies
7. Solaris
Hi,
I am a newbie to Solaris, I have a SunFire V120 box, i was trying to install a tape drive(HP SureStore DAT24), i did the install in this manner.
# rm -rf /etc/path_to_inst
# init 6
later at the "ok" prompt i gave "boot -ar" after doing that it asked me various options i accepted the... (2 Replies)
Discussion started by: rajendra.rait
2 Replies
8. Filesystems, Disks and Memory
Hi all, please help I am stuck.
I have installed a external unipack scsi tape drive. The tape drive is Exabyte Eliant 820. All I did was connected scsi cable and power it on. When issued "probe-scsi-all" command, the tape is correctly identified. However, when issued "dmesg | more" command, the... (4 Replies)
Discussion started by: dennis
4 Replies
TS(4) Kernel Interfaces Manual TS(4)
NAME
ts - TS-11 magtape interface
SYNOPSIS
/sys/conf/SYSTEM:
NTS ts_drives # TS11
/etc/dtab:
#Name Unit# Addr Vector Br Handler(s) # Comments
ts ? 172520 224 5 tsintr # ts11 driver
major device number(s):
raw: 8
block: 2
minor device encoding:
bits 0003 specify TS drive
bit 0004 specifies no-rewind operation
bit 0010 ignored
DESCRIPTION
The ts-11 combination provides a standard tape drive interface as described in mtio(4). The ts-11 operates only at 1600 bpi, and only one
transport is possible per controller.
FILES
/dev/MAKEDEV script to create special files
/dev/MAKEDEV.local script to localize special files
SEE ALSO
mt(1), tar(1), tp(1), mtio(4), ht(4), tm(4), dtab(5), autoconfig(8)
DIAGNOSTICS
ts%d: no write ring. An attempt was made to write on the tape drive when no write ring was present; this message is written on the termi-
nal of the user who tried to access the tape.
ts%d: not online. An attempt was made to access the tape while it was offline; this message is written on the terminal of the user who
tried to access the tape.
ts%d: hard error bn%d xs0=%b xs1=%b xs2=%b xs3=%b. A hard error occurred on the tape at block bn; status registers 0-3 are printed in
octal and symbolically decoded as bits.
ts%d: addr mod 4 != 0. The address of a TS-11 command packet was not on an even longword boundary.
BUGS
If any non-data error is encountered on non-raw tape, it refuses to do anything more until closed.
The device lives at the same address as a tm-11 tm(4).
3rd Berkeley Distribution January 28, 1988 TS(4)
