mksysb to hot swap hard drive

9 More Discussions You Might Find Interesting

1. AIX

RAID 10 Failed Drive Swap

I am new to the AIX operating system and am seeking out some advice. We recently have had a drive go bad on our AIX server that is in a RAID 10 array. We have a replacement on the way. I was wondering what the correct steps are to swap out this drive. Does the server need to be powered off? Or can...

2. SCO

SCO 5.0.7 Tape Drive swap

Our tape drive died and I installed a newer Quantum DAT72 drive in it's place with the same SCSI ID. It still works, but with one major flaw, the system will lock up if I try to upgrade BackupEDGE or view NFS settings in scoadmin. I get a Transition to ready failure on ha=0* message when the...

3. Hardware

[Solved] Boot Lockup After Drive Swap

Hey All, Im using Fedora 2.6 (which is cannot be changed for compatibility reasons). I cloned a drive from a different server and when i added this drive to a new box, during startup it hangs on "Configuring Kernel Parameters:" Is there any way to bypass this process and still boot...

4. AIX

How to mksysb to a tape drive connected to a different LPAR?

I have 2 LPARs running AIX 5.3. Both are on the same VLAN. One LPAR, which I'll call LPAR2, has a 4mm SCSI tape drive connected to it, while LPAR1 does not have a tape drive connected. I am able to take mksysb backups of LPAR2 to the tape drive since it's directly connected. However, I need to...

5. SCO

Occasional Core Dump with hot swap USB Thumb Drive

Hello Unix World, I've been having this issue for the longest time. Here is my setup OS: SCO OpenServer 6.0 with mp4, mp3 Server: Dell PowerEdge 840, 800, 2900 USB Stick: Patriot 16GB High Speed, and many other different brands. Occasinaly while system is running and USB is pluged in the...

6. AIX

savevg/tar/mksysb of server-A on remote tape drive possible ?

Every 3 months we have to do backups (smitth mksysb/lsmksysb + tar) on at least 30 workstations. We have to carry around 2 external tape drives to connect to them. It is a pain to do because it takes at least 3 days to do (evening/night shift) and users sometimes complain that there desk is not put...

7. Filesystems, Disks and Memory

The best partitioning schem for a 250GB Sata hard drive & a 75GB SCSI hard drive

Hi I have 2 75GB SCSI hard drives and 2 250GB SATA hard drives which are using RAID Level 1 respectively. I wana have both FTP and Apache installed on them as services. I'm wondering what's the best partitioning schem? I wana use FC3 as my OS, so, I thought I can use the 75GB hard drive as the /...

8. UNIX for Dummies Questions & Answers

Trying to copy old hard drive to new hard drive.

:confused: ........I have a new hard drive and I need to copy ALL info from the old to the new. I would like to use the dd command. I know the command is as follows...... dd if=/dev/rdsk/c1t1d0s0 of=/dev/rdsk/???????? Where I have the question marks is the problem. How do I find out what the...

9. UNIX for Advanced & Expert Users

reading the hard drive

I have suns machine that holds two hard drives. I only used one. I tryed to make a lan network with my windows xp. When I tryed to restart the machine it wanted to a password. when before I just typed root to log in. So i edited the etc dir. big mistake. So now the machine will not read the hard...

LEARN ABOUT PLAN9

wren

WREN(3) 						     Library Functions Manual							   WREN(3)

NAME

       wren, ata - hard disk interface

SYNOPSIS

       bind #H[drive] /dev
       bind #w[target[.lun]] /dev

       /dev/hd0disk
       /dev/hd0partition
       /dev/sd0disk
       /dev/sd0partition
	...

DESCRIPTION

       The  hard  disk interfaces (wren, #w, is a SCSI disk; ata, #H, is an IDE or ATA disk) serve a one-level directory giving access to the hard
       disk partitions.  The parameter to attach defines the numerical SCSI target and logical unit number or the  IDE	drive  number  to  access.
       Both default to zero.

       Each  partition name is prefixed by hd and the numeric drive identifier.  The partition always exists and covers the entire disk.  The size
       of each partition as reported by stat(2) is the number of bytes in the partition, so the size of is the size of the entire disk.

       The partition also always exists; it is the last block on the disk for SCSI, second to last for IDE.  If it contains valid partition  data,
       those  partitions will be visible as well.  Every time the device is bound, the partitions are updated to reflect any changes in the parti-
       tion file.

       The format of the partition file is the string

	      plan9 partitions

       on a line, followed by partition specifications, one per line, consisting of a name and textual strings for the block start and	limit  for
       each partition on the disk.

       The program prep(8) writes the partition table for the disk; its use is preferred to writing it by hand.

SEE ALSO

       prep(8), scsi(3)

SOURCE

       /sys/src/9/port/devwren.c
       /sys/src/9/pc/devata.c

																	   WREN(3)

Filesystems, Disks and Memory