Partition Tables + Slackware?


 
Thread Tools Search this Thread
Special Forums Hardware Filesystems, Disks and Memory Partition Tables + Slackware?
# 1  
Old 08-06-2003
Partition Tables + Slackware?

Hello! im having a hard time installing Slackware 9 on my 20GB hard drive.

it boots "bare.i" all the way until detecting partitions on my hard drive, hanging like this

Quote:
Partition check:
hda:_
yet, vector linux (kernel 2.4.18) and my old redhat (2.2.12-10) work fine? oh though it does cause a boot delay if i connect to my other computer, running windows - theres a good 30second pause before NTLDR does anything?! but on its own, its perfect!

now, i've down a full low-level format yet, it's still pretty much the same?!

--
AMD Athlon 700 (slot-A)
Gigabyte 7IXE.F7
Maxtor DiamondMax Plus D740x @20GB
256MB PC100
Dlink 530 TX
Login or Register to Ask a Question

Previous Thread | Next Thread

8 More Discussions You Might Find Interesting

1. Red Hat

Shrink LVM partition & create new Linux Primary partition

Hello All, I have a Red Hat Linux 5.9 Server installed with one hard disk & 2 Partitions created on it as follows, /boot - Linux Partition & another is LVM - One VG & under that 5-6 Logical volumes(var,opt,home etc). Here my requirement is to take out 1GB of space from LVM ( Any logical... (5 Replies)
Discussion started by: gr8_usk
5 Replies

2. Filesystems, Disks and Memory

Ask concept soft partition vs hard partition

Hi Experts I would like to know different between soft partition concept and hard partition concept on solaris. Here is little explanation between soft partition concept and hard partition concept on solaris. Soft Partition: 1TB total space available in storage in all mapped to the OS to... (2 Replies)
Discussion started by: edydsuranta
2 Replies

3. Solaris

Partition overlaps another partition while creating new parition in solaris

hi all while formatting hard disk i am getting following error. Partition 1 ends at 266338338 It must be between 34 and 143374704. label error: EFI Labels do not support overlapping partitions Partition 8 overlaps partition 1. Warning: error writing EFI. Label failed. I have formatted the... (2 Replies)
Discussion started by: nikhil kasar
2 Replies

4. Shell Programming and Scripting

rsync from partition to partition fastest

Gentleman, Please move if I have chose the incorrect forum section. I am trying to move data that is not backed up from partition 1 to partition 2 on a SAN that has a GFS2 filesystem. Since the data is not backed up I am rsyncing this data and once verified I will delete from the source... (6 Replies)
Discussion started by: jaysunn
6 Replies

5. Slackware

Help me!!!! - Slackware 12 Issue - Invalid Partition table

Hi All, I am a linux newbie. After working with my loveable FEDORA 10 for months, i found it a bit slower. I wanted to try with slackware this time. I already had Windows XP and fedora in my 80 GB SATA disk. Now i allotted 15 GB ( SWAP + / + /home/usr ). During my installation i encountered no... (5 Replies)
Discussion started by: beinthemiddle
5 Replies

6. Shell Programming and Scripting

Converting tables of row data into columns of tables

I am trying to transpose tables listed in the format into format. Any help would be greatly appreciated. Input: test_data_1 1 2 90% 4 3 91% 5 4 90% 6 5 90% 9 6 90% test_data_2 3 5 92% 5 4 92% 7 3 93% 9 2 92% 1 1 92% ... Output:... (7 Replies)
Discussion started by: justthisguy
7 Replies

7. UNIX for Dummies Questions & Answers

I've created a partition with GNU Parted, how do I mount the partition?

I've created a partition with GNU Parted, how do I mount the partition? The manual information at http://www.gnu.org/software/parted/manual/parted.html is good, but I am sure about how I mount the partition afterwards. Thanks, --Todd (1 Reply)
Discussion started by: jtp51
1 Replies

8. UNIX for Dummies Questions & Answers

understanding logical partition, physical partition

hi, 1) is logical partition the same as physical partition except that one is physical and the other is logical? 2) then it must a one to one ratio? (3 Replies)
Discussion started by: yls177
3 Replies
Login or Register to Ask a Question
RA(4)							     Kernel Interfaces Manual							     RA(4)

NAME
ra - MSCP disk controller interface SYNOPSIS
/sys/conf/SYSTEM: NRAC ra_controllers # NRAD controllers NRAD ra_drives # RX33/50, RC25, RD51/52/53/54, RA60/80/81/82 /etc/dtab: #Name Unit# Addr Vector Br Handler(s) # Comments ra ? 172150 154 5 raintr # uda50, rqdx1/2/3 major device number(s): raw: 14 block: 5 minor device encoding: bits 0007 specify partition of RA drive bits 0070 specify RA drive bits 0300 specify RA controller DESCRIPTION
This is a driver for the DEC UDA-50 disk controller and for other compatible controllers. The UDA-50 communicates with the host through a packet oriented protocol termed the Mass Storage Control Protocol (MSCP). Consult the file <pdp/mscp.h> for a detailed description of this protocol. Files with minor device numbers 0 through 7 refer to various portions of drive 0; minor devices 8 through 15 refer to drive 1, etc. The standard device names begin with ``ra'' followed by the drive number and then a letter a-h for partitions 0-7 respectively. The character ? stands here for a drive number in the range 0-7. The block files access the disk via the system's normal buffering mechanism and may be read and written without regard to physical disk records. There is also a `raw' interface which provides for direct transmission between the disk and the user's read or write buffer. A single read or write call results in exactly one I/O operation and therefore raw I/O is considerably more efficient when many words are transmitted. The names of the raw files conventionally begin with an extra `r.' In raw I/O the buffer must begin on a word (even) boundary, and counts should be a multiple of 512 bytes (a disk sector). Likewise seek calls should specify a multiple of 512 bytes. DISK SUPPORT
This driver configures the drive type of each drive when it is first opened. Partition information is read from the disklabel. If there is no label or the label is corrupt then the 'a' partition is used to span the entire drive. The ra?a partition is normally used for the root file system, the ra?b partition as a swap area, and the ra?c partition for pack-pack copy- ing (it maps the entire disk). FILES
/dev/ra[0-7][a-h] /dev/rra[0-7][a-h] /dev/MAKEDEV script to create special files SEE ALSO
hk(4), ram(4), rk(4), rl(4), rp(4), rx(4), si(4), xp(4), dtab(5), autoconfig(8), disklabel(8) DIAGNOSTICS
rasa %o, state %d. (Additional status information given after a hard i/o error.) The values of the UDA-50 status register and the inter- nal driver state are printed. ra%d: interrupt in unknown state %d ignored. An interrupt was received when the driver was in an unknown internal state. Indicates a hardware problem or a driver bug. ra%d: fatal error (%o). The UDA-50 indicated a ``fatal error'' in the status returned to the host. The contents of the status register are displayed. ra%d,%d: OFFLINE. (Additional status information given after a hard i/o error.) A hard i/o error occurred because the drive was not on- line. The attached unit number and the MSCP unit numbers are printed. status %o. (Additional status information given after a hard i/o error.) The status information returned from the UDA-50 is tacked onto the end of the hard error message printed on the console. ra: unknown packet opcode=0%o. An MSCP packet of unknown type was received from the UDA-50. Check the cabling to the controller. The following errors are interpretations of MSCP error messages returned by the UDA-50 to the host. ra: %s error, controller error, event 0%o. ra: %s error, host memory access error, event 0%o, addr 0%o. ra: %s error, disk transfer error, unit %d, grp 0x%x, hdr 0x%x. ra: %s error, SDI error, unit %d, event 0%o, hdr 0x%x. ra: %s error, small disk error, unit %d, event 0%o, cyl %d. ra: %s error, unknown error, unit %d, format 0%o, event 0%o. BUGS
In raw I/O read and write(2) truncate file offsets to 512-byte block boundaries, and write scribbles on the tail of incomplete blocks. Thus, in programs that are likely to access raw devices, read, write and lseek(2) should always deal in 512-byte multiples. 3rd Berkeley Distribution September 6, 1987 RA(4)