10 More Discussions You Might Find Interesting
1. AIX
Hi,
The problem I have is I want to restore my AIX machine. I have created a mksysb tape from my tape drive rmt0 and I changed the bootlist using this command "bootlist -m normal rmt0 hdisk0".
However, when I display the bootlist "bootlist -om normal", it shows '-' hdisk0. I googled and... (2 Replies)
Discussion started by: AixNoob87
2 Replies
2. Hardware
I've had a scsi hard drive, scsi tape drive, and cd rom working off an adaptec 29160 controller. Everything worked great until a few days ago. I begin getting tar format errors (running sco 5.0.6) on the tape drive and occasionally the entire system would hang up while trying to access data on... (0 Replies)
Discussion started by: powwm
0 Replies
3. AIX
Hi,
I'm at AIX 5.3.
My EOD program is giving following error while writing to tape:
Can't write output
cpio: Media Surface error
Failed on Shell-script
cd /; cpio -ocB 2 >> /autoline/misc/logs/bk.CopyToTape < /autoline/work/BACKUP.01022 1>/dev/rm0
I have tried with several new tapes,... (2 Replies)
Discussion started by: tayyabq8
2 Replies
4. AIX
Hi Everyone,
The machine I'm working on is an AIX 5.3 LPAR running on a P650. oslevel -r shows 5300-08. I'm trying to take a backup to a SCSI tape drive, which has been working up until this point. I know of nothing that has changed recently to cause this problem. But when I try to take a... (0 Replies)
Discussion started by: need2bageek
0 Replies
5. HP-UX
Hello All,
I have HP Openview storage data protector version 5.5. When I am going to write my backup I have an error message saying "Connot Open Device /dev/rmt/0mn"
Follownig is my output:
# ls -l /dev/rmt/0mn
crw-rw-rw- 2 bin bin 205 0x080140 Jan 17 16:41 /dev/rmt/0mn
# uname -a... (2 Replies)
Discussion started by: hellozishan
2 Replies
6. Solaris
Hi all,
I have solaris 10 sparc running and working very well
but i have problem with external SCSI tape drive DAT 72 problem
it seems to me the tape drive is manufactured by SUN microsystems
when i ran ls -l /dev/rmt/0
it reveals the following output
bash-3.00# mt -f /dev/rmt/0... (2 Replies)
Discussion started by: h@foorsa.biz
2 Replies
7. SCO
I replaced a HP Superstore Dat 40 with another HP Superstore Dat 40, but my backupedge software keeps putting up error code 1 (device not found) I have tried reinstaling the drive as DAT Alad stp 0 6 0 0. I'm not a computer expert but willing to have a go. I went into Backupedge to try and format a... (2 Replies)
Discussion started by: James Zwecker
2 Replies
8. Solaris
Server 1 - Sun Solaris 5.8 sparc SUNW,Sun-Fire-480R with attached DLT tape drive /dev/rmt/0n
Server 2 - Old DG-UX box which has restore command on it compatible with the files on the backyup tape - backed up with dump2
Server 3 - Sun solaris 5.9 sparc SUNW,Sun-Fire-V490 with lots of free space... (4 Replies)
Discussion started by: lindab
4 Replies
9. AIX
I'm attempting to read a tape in a 4mm drive (AIX 4.3) using the following command...
tar tvf /dev/rmt0
...and I keep getting the following error message:
tar: 0511-193 An error occurred while reading from the media.
There is not enough memory available now.
I've googled this error... (2 Replies)
Discussion started by: tdpearson
2 Replies
10. UNIX for Dummies Questions & Answers
Thanks for checking in.
We have this script that does a backup called Ignite on HP-UX
in this script it does everything it supposed to do accept one thing
Script
#########################################
echo
clear
cd /
echo " Please ensure there is a DLT tape in Slot 6 of the Tape... (2 Replies)
Discussion started by: nemex
2 Replies
TS(4) Kernel Interfaces Manual TS(4)
NAME
ts - TS-11 magtape interface
SYNOPSIS
/sys/conf/SYSTEM:
NTS ts_drives # TS11
/etc/dtab:
#Name Unit# Addr Vector Br Handler(s) # Comments
ts ? 172520 224 5 tsintr # ts11 driver
major device number(s):
raw: 8
block: 2
minor device encoding:
bits 0003 specify TS drive
bit 0004 specifies no-rewind operation
bit 0010 ignored
DESCRIPTION
The ts-11 combination provides a standard tape drive interface as described in mtio(4). The ts-11 operates only at 1600 bpi, and only one
transport is possible per controller.
FILES
/dev/MAKEDEV script to create special files
/dev/MAKEDEV.local script to localize special files
SEE ALSO
mt(1), tar(1), tp(1), mtio(4), ht(4), tm(4), dtab(5), autoconfig(8)
DIAGNOSTICS
ts%d: no write ring. An attempt was made to write on the tape drive when no write ring was present; this message is written on the termi-
nal of the user who tried to access the tape.
ts%d: not online. An attempt was made to access the tape while it was offline; this message is written on the terminal of the user who
tried to access the tape.
ts%d: hard error bn%d xs0=%b xs1=%b xs2=%b xs3=%b. A hard error occurred on the tape at block bn; status registers 0-3 are printed in
octal and symbolically decoded as bits.
ts%d: addr mod 4 != 0. The address of a TS-11 command packet was not on an even longword boundary.
BUGS
If any non-data error is encountered on non-raw tape, it refuses to do anything more until closed.
The device lives at the same address as a tm-11 tm(4).
3rd Berkeley Distribution January 28, 1988 TS(4)
