Hi,
This is what i'd tried
The IBM machine model 7028-6E4 consist 3 physical serial port (sa0 - S1, sa1 - S2, sa2 - S3)
To make life easy, I only create a tty0 point to sa0 using smitty
smitty tty
-> tty rs232 asynchronous terminal
-> sa0 Available 01-S1 Standard I/O Serial Port
I'd followed the parameter setup given by technical spec of WaveCom M1306B.
http://www.jandrew-elec.com/m1306b.pdf where
baudrate - 115200
parity - None
data bit - 8
stop bit - 1
flow ctrl - rts (hardware)
Initially we suspect it could be the modem problem, but it works in Window 2000 server
Anyway, let's move to the next part
I'd vi /usr/lib/uucp/Devices file and uncomment the line below
Direct tty0 - 115200 direct
PS: I even tried this
Direct tty0 - Any direct
After that, I try to connect to the modem using this command
cu -ml tty0
and this is the response the machine gave
cu: 0835-028 The connection failed. CAN'T ACCESS DEVICE.
Well, so I tried to chmod the /dev/tty0 to 666
But once i did it, and cu again, it just hung there and no "connected" message prompt out
Have i miss up some steps?
Please help