Power8 S812L:HMC issue and ...

10 More Discussions You Might Find Interesting

1. AIX

IBM Power Linux Cluster Fence device on Power8 Platform

wasn't quite sure which forum to post in. What typical fence device to configure for a Power Linux PaceMaker Cluster running on the Power8 Platform (S822 Model of hardware), or what should be ordered with the S822 for use as a Fence Device?

2. AIX

HMC in VmWare NIC sl0 issue.

Hi There, First of all I'm new to *nix world, so bear with me and English is not my native tongue :) Now I'm working on the HMC 7.3.3.0 ServPack:0 base_version:20080402.1 to make it work in VmWare (testing in Workstation) I've got HMC installed and realized that network options in GUI...

3. AIX

StorWize v3700 and Power8 (S822) AIX, configuration best practice for LUNs?

Hello, We have an Power8 System (S822) and a IBM StorWize v3700 SAN. The OS is AIX 7.1. With this hardware from what I read I need to download/install special SDDPCM drivers, so I did (SDDPCM VERSION 2.6.6.0 (devices.sddpcm.71.rte). I carved my volumes in the StorWize and presented to...

4. AIX

New IBM Power8 (S822) and StorWiz V3700 SAN, best practices for production setup/config?

Hello, Got a IBM Power8 box (S822) that I am configuring for replacement of our existing IBM machine. Wanted to touch base with the expert community here to ensure I don't miss anything critical in my setup/config of AIX. Did a fresh AIX 7.1 install on the internal scsi hdisk, mirror'ed...

5. AIX

[TIP] Migration to POWER8

Read "Migration to POWER8" article to get prepared for migration to POWER8: link removed, advertisement

6. AIX

HMC Commands

Hello All, Can anybody knows a command, what I can check the processes in the HMC restricted shell? :wall:

7. AIX

AIX and HMC installation issue

I started the AIX install with a fiber channel disk, and let it run: restricted by GSA ADP Schedule Contract with IBM Corp. . . . . . << End of copyright notice for perfagent.tools >>. . . . ...

8. AIX

CDROM Issue on LPAR HMC VIO

Whenever I assign/unassign a CDROM ( RAID CTRL ) to Active LPAR from HMC, I have to reboot the LPAR. How can I do it without rebooting the LPARS. POWER6 with HMC LPARS = AIX 6.1 Any info developerWorks : AIX and UNIX : PowerVM Forum : Moving CD-ROM/DVD-ROM dynamically ... But...

9. AIX

Hmc

Hello everybody, had a question. Iam having a p650 box here, System Model: IBM,7038-6M2 Machine Serial Number: 1078DCC managed system - 1 which has 2 lpars on it i added memory to the box(made sure that memory added was in proper quads and was verified by a CE) after i rebooted the box, the...

10. AIX

Hmc

Well i am right now working on an IBM P550 risc server with an HMC connected.. The server has 2 logical partitions (Lpar). both lpar is having Aix 5.3 installed. Now I have a doubt.. is it possible to have Aix in one lpar and windows 2003 in another.. cheers Bala

LEARN ABOUT NETBSD

sm

SM(4)							   BSD Kernel Interfaces Manual 						     SM(4)

NAME

     sm -- SMC91Cxx-based Ethernet interfaces device driver

SYNOPSIS

     sm0 at isa? port 0x300 irq 10
     sm* at mhzc?
     sm* at pcmcia? function ?
     sm* at nubus?

DESCRIPTION

     The sm device driver supports SMC91C9x-based and SMC91C1xx-based Ethernet interfaces.

     The ISA attachment of the sm driver supports any SMC91C9x-based Ethernet interface on the ISA bus, including the EFA Info*Express SVC VLB
     interface, and the on-board SMC91C9x Ethernet found in many embedded PCs and laptop docking stations.

     The mhzc attachment of the sm driver supports the Megahertz combo Ethernet and modem card.

     The PCMCIA attachment of the sm driver supports Megahertz X-JACK Ethernet cards.

     The nubus attachment of the sm driver supports SMC-based Ethernet cards for the macintosh.

MEDIA SELECTION

     The SMC91C1xx supports the MII interface and so the list of supported media depends on several factors, including which PHY is attached.  The
     SMC91C9x supports AUI and UTP media types.

     To enable the AUI media, select the 10base5 or aui media type with ifconfig(8)'s media directive.	To select UTP, select the 10baseT or utp
     media type.

     ifconfig(8)'s -m option will display the full list of supported media directives for a particular configuration.

DIAGNOSTICS

     sm0: unable to read MAC address from CIS  This indicates that the Ethernet address, which is stored in the CIS information on the Megahertz
     X-JACK PCMCIA Ethernet card, is corrupted.

SEE ALSO

     ifmedia(4), intro(4), isa(4), mhzc(4), mii(4), pcmcia(4), ifconfig(8)

BSD
								 November 10, 1997							       BSD

AIX