11-02-2001
You should still be able to manually install your 3Com card. Check your manual that came with your OS and look for the <b>modprobe</b> command for your particular adapter. This will probably be something like <b>modprobe 3c90x.o</b> assuming your 3Com card is a 90x model. You might want to try the tulip.o module first since it is generic and most NIC's will be able to use it without a problem. You can get a list of NIC modules in <b>/lib/modules/2.2.19/net</b> or something similar; the 2.2.19 is my kernel so yours might differ, but there is usually only one subdirectory in <b>/lib/modules</b>. If you don't have a manual you should propbably search Caldera's site for more info.
Once you get your NIC up Cable modem is much more straight forward to set up then DCL from my experience.
10 More Discussions You Might Find Interesting
1. IP Networking
If the cable modem that the cable company is using doesn't support unix is there a way around that . Are there drivers I can get online or is there a way to configure redhat lenix (that's what I will be using) to work with the cable modem. Or is there a way to buy a third party cable modem that... (3 Replies)
Discussion started by: gparsons70
3 Replies
2. UNIX for Dummies Questions & Answers
Caldera eDesktop 2.4 - Cable Modem
my NIC card has been detected, but funny scenario:
#dmesg
eth0: RealTek rtl8139 Fast Ethernet at 0x2400, IRQ 0, 00:50:ba:43:a0:ef
/*I noticed that it detected the correct module (rtl8139) but I'm using D-Link and not RealTek, which uses the same module.... (1 Reply)
Discussion started by: zorro
1 Replies
3. UNIX for Dummies Questions & Answers
Is anyone using a cable modem with unix and if so does your cable co. support unix or did you get that going on your own and how.
Thank you for all your help. (5 Replies)
Discussion started by: gparsons70
5 Replies
4. IP Networking
I can do all this in windows, but Im trying to run the SuSe 8.0 professional as a gateway. I have the local (private) LAN setup with no problems, but Im having troubles getting it to use DHCP to go out on the external card to the service provider, which only uses Dynamic IP's. WHere, what and how... (3 Replies)
Discussion started by: ftn96
3 Replies
5. UNIX for Dummies Questions & Answers
hi , i have sparc machine , i want to connect my le0 (ethernet interface) directly to cable modem ,
i have created a file resolv.conf,hosts, dhcp.le0,defaultrouter,nisswitch,hostname.le0. i dont know my cable companies <domain name> and <name server assigned to me> , also they even dont know how... (5 Replies)
Discussion started by: raju
5 Replies
6. UNIX for Dummies Questions & Answers
Ok I am new to this and wondering if there is any way of connecting a cable modem to an SGI that is running IRIX 6.5 and how to do it... (1 Reply)
Discussion started by: Acidjack
1 Replies
7. BSD
hi
I want to setup my cable modem under OpenBSD. I did not configure my network while installing the system.
When I type, I get
# ifconfig -a
lo0 : ....
...
...
rl0 : ....
...
...
vr0 : ...
...
...
I have two network cards (the machine will be a router).
I created... (1 Reply)
Discussion started by: fnoyan
1 Replies
8. Solaris
Hi all,
Is there any difference between a null modem cable or a modem cable ?
i assume that a null modem cable is a normal cable that i used from cpu serial ports to a modem for dialup.
please correct if i am wrong,
thks (2 Replies)
Discussion started by: waterbear
2 Replies
9. Solaris
I have a dual boot system with XP being the primary for now and Solaris 10 being the Secondary. I have a cable modem and wish to configure the same to be used with Solaris so that I can browse the Internet and such.
I have connected my x86 machine with a Netgear Router and that in turn is... (7 Replies)
Discussion started by: tubbyrana
7 Replies
10. OS X (Apple)
Hi.
I have a very strange problem, so strange I don't even know which sub-forum to post it to.
Last week, my cable modem broke, so I took it back and got a new one.
The new one doesn't work with my old router so, for now, I have to connect the modem directly to my Mac with an ethernet... (14 Replies)
Discussion started by: Scott
14 Replies
LEARN ABOUT MOJAVE
modules-load.d
MODULES-LOAD.D(5) modules-load.d MODULES-LOAD.D(5)
NAME
modules-load.d - Configure kernel modules to load at boot
SYNOPSIS
/etc/modules-load.d/*.conf
/run/modules-load.d/*.conf
/usr/lib/modules-load.d/*.conf
DESCRIPTION
systemd-modules-load.service(8) reads files from the above directories which contain kernel modules to load during boot in a static list.
Each configuration file is named in the style of /etc/modules-load.d/program.conf. Note that it is usually a better idea to rely on the
automatic module loading by PCI IDs, USB IDs, DMI IDs or similar triggers encoded in the kernel modules themselves instead of static
configuration like this. In fact, most modern kernel modules are prepared for automatic loading already.
CONFIGURATION FORMAT
The configuration files should simply contain a list of kernel module names to load, separated by newlines. Empty lines and lines whose
first non-whitespace character is # or ; are ignored.
CONFIGURATION DIRECTORIES AND PRECEDENCE
Configuration files are read from directories in /etc/, /run/, and /lib/, in order of precedence. Each configuration file in these
configuration directories shall be named in the style of filename.conf. Files in /etc/ override files with the same name in /run/ and
/lib/. Files in /run/ override files with the same name in /lib/.
Packages should install their configuration files in /lib/. Files in /etc/ are reserved for the local administrator, who may use this logic
to override the configuration files installed by vendor packages. All configuration files are sorted by their filename in lexicographic
order, regardless of which of the directories they reside in. If multiple files specify the same option, the entry in the file with the
lexicographically latest name will take precedence. It is recommended to prefix all filenames with a two-digit number and a dash, to
simplify the ordering of the files.
If the administrator wants to disable a configuration file supplied by the vendor, the recommended way is to place a symlink to /dev/null
in the configuration directory in /etc/, with the same filename as the vendor configuration file. If the vendor configuration file is
included in the initrd image, the image has to be regenerated.
EXAMPLE
Example 1. /etc/modules-load.d/virtio-net.conf example:
# Load virtio-net.ko at boot
virtio-net
SEE ALSO
systemd(1), systemd-modules-load.service(8), systemd-delta(1), modprobe(8)
systemd 237 MODULES-LOAD.D(5)