Sponsored Content
Operating Systems Linux modem - usb to serial configuration Post 96652 by ameya_shaligram on Sunday 22nd of January 2006 08:31:10 AM
Old 01-22-2006
Quote:
Originally Posted by jshoovie
Where do i get the vaules for this command (VVVV and PPPP)?

I have a Multitech serial modem.


insmod usb-serial.o vendor=0xVVVV product-0xPPPP
Hello jshoovie
1)The answer to your question is:
you can get the list from wwww.linux-usb.org .

2)Can you help me in configuring my USB->serial converter.

a) I am working on Fedora core 4(2.6.11).When I giv the insmod command, I get the following answer:
cannot find usb-serial.o

b)I downloaded cp2101 drivers CP2101x.RedHat8v1.1.tar.gz .It has 4 filesone of which is usbserial.o .Where to copy the file.

c) It is said the kernel 2.6.12 supports usb. How to configure or compile it with my kernel.(for hotplug support)

d) After plugging my cable and typing dmesg.The o/p is:
new full speed usb device using ohci_hcd and address 3.

e)But to configure under minicom , I did not find /dev/usb/ttyUSB0 port.
Do we need to make the usb0 node ourselves using
mknod /dev/usb/ttyUSB0 c 188 o
or is it existing already.

f)Anyone,Please help me.Please tell me step by step configuration with commands used.I am a newbie.
 

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Installing a modem on a serial accelerator ports

I had been using a modem installed on a Digi accelerator port to dial in to an SCO open server r5 server. On monday it quit working and I realy don't know how it was installed and configured. I have tested the modem on a PC and it works. The port the modem is connected to is ttyB06 and I have... (1 Reply)
Discussion started by: kikkin
1 Replies

2. UNIX for Dummies Questions & Answers

Add usb modem on a 5.0.7

hi guys i know a litter bit of sco openserver 5.0.6 I got my self a 5.0.7 version. The problem is how do you install a usb modem? The way i'm used to doit is by serial port , you know tty1A . Please guys bear with me Thanks a lot Jose. (1 Reply)
Discussion started by: josramon
1 Replies

3. Solaris

Solaris 10 ADSL USB modem problem

Hi, I have USB Siemens Santis 100 ADSL modem.I need driver for this modem on Solaris 10.Please help me with some info.Platform is x86.Thanks. (2 Replies)
Discussion started by: Upravnik
2 Replies

4. Solaris

null modem serial cable for server testing

HI all, i still have a problem when using null modem to see the output from my server(sun ultra en 3000). i followed the instruction from the internet, but it is not working. 1. i am using db9(5 4, 2 rows,put in laptop serial port) and db25(13 12, 2 rows,put in (A) server serial port). 2.... (3 Replies)
Discussion started by: waterbear
3 Replies

5. Solaris

Solaris 9 & USR USB Modem Configuration

Hello There, I just wanted to know if there is any possible configuration for setting up my external USR USB Modem in Solaris 9 (x86). Any help is definitely appreciated. Thanks Khurram Bashir (1 Reply)
Discussion started by: khurram
1 Replies

6. Solaris

Communicate Serial Modem using non-Root user

Hi, I'm having a issue on communicating the serial GSM modem in Sun Solaris 5.9 To implement such connectiom, i'm using the "tip -115200 /dev/term/a" command and i successfully get the "connected" status And then i send a "AT" message and receive "OK" response from the modem :D Anyhow,... (0 Replies)
Discussion started by: darontan
0 Replies

7. Solaris

Installing USB adsl modem?

Hello all, granted that I am an absolute beginner with Solaris, I'd like to use my adsl modem, t's a Zyxel prestige 630. I managed to install and configure it under Ubuntu using the drivers from Conexant AccessRunner ADSL USB modems with Linux ; is there a chance to do the same under Solaris 10... (0 Replies)
Discussion started by: clalfa
0 Replies

8. UNIX for Dummies Questions & Answers

Freeing up a serial port with a modem connected

I currently access a remote Unix server which has an external modem connected to one of it's serial ports (/dev/cua/b). At times, this server undergoes a hard reset and for some reason this disallows us from making use of the modem any longer. A hard reset of the modem always seems to fix the... (0 Replies)
Discussion started by: ebender1
0 Replies

9. AIX

serial modem connection

I configured the serial modem in my P6-550 AIX 5.3 box But i dont have telephone line. when I run the command # cu -l /dev/tty1 the output is as follows does it mean that my modem is responding to the command? can i say my serial port is working and communicating fine? Connected ... (3 Replies)
Discussion started by: pchangba
3 Replies

10. Solaris

Solaris 11.2 does not assign serial port to 3g usb modem?

In ubuntu etopic i create this udev rules for prolink 3g usb modem: SUBSYSTEM=="block", SUBSYSTEM=="scsi", ATTRS{idVendor}=="1e0e", ATTRS{idProduct}=="f000", ACTION=="add", RUN+="/sbin/modprobe usbserial Vendor=0X1e0e Product=0Xf000" After plugging the usb modem, ubuntu assigns the ports... (4 Replies)
Discussion started by: shamsat
4 Replies
BAYCOM(9)						      Kernel Reference Guide							 BAYCOM(9)

NAME
baycom - amateur (AX.25) packet radio network driver for baycom modems SYNOPSIS
#include <linux/baycom.h> #include <linux/hdlcdrv.h> DESCRIPTION
The driver currently supports three different modems: ser12, par96 and par97. ser12 This is a very simple 1200 baud AFSK modem. The modem consists only of a modulator/demodulator chip, usually a TI TCM3105. The computer is responsible for regenerating the receiver bit clock. The modem connects to a serial port, hence the name. Since the serial port is not used as an async serial port, the kernel driver for serial ports cannot be used, and this driver only supports standard serial hardware (8250, 16450, 16550). par96 This is a modem for 9600 baud FSK compatible to the G3RUH standard. The modem does all the filtering and regenerates the receiver clock. Data is transferred from and to the PC via a shift register. The shift register is filled with 16 bits and an interrupt is signalled. The PC then empties the shift register in a burst. This modem connects to the parallel port, hence the name. par97 This is a redesign of the par96 modem by Henning Rech, DF9IC. The modem is protocol compatible to par96, but uses only three low power ICs and can therefore be fed from the parallel port and does not require an additional power supply. IOCTL CALLS
The ioctl calls follow the implementation in the hdlcdrv. BAYCOMCTL_GETMODEMTYPE returns the modem type (i.e. ser12 or par96) and the options in effect (currently only the source of the DCD signal) BAYCOMCTL_SETMODEMTYPE sets the modem type and the options. Only superuser can do this. BAYCOMCTL_GETDEBUG return some debugging values. Not always available. SEE ALSO
baycom (9), soundmodem (9), linux/drivers/net/hdlcdrv.c, AUTHOR
baycom was written by Thomas Sailer, HB9JNX/AE4WA, (t.sailer@alumni.ethz.ch). Linux 2.1.x 2 October 1996 BAYCOM(9)
All times are GMT -4. The time now is 10:44 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy