No network interface detected Post: 89469

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Network Interface

Hi ! Does anyone know how can i get information about my network interface ... if it works in half or full duplex mode !! Thx in adivance ! Witt

2. UNIX for Advanced & Expert Users

Network interface goes down intermittently

Hi all, I'm using an HP Proliant server with double NIC and Debian 5 (Lenny) as its OS. I used link bonding on it for several years with no problem. Today, (now only one interface connected to switch) the interface went down. I restarted networking service (/etc/init.d/networking restart) and...

3. Solaris

configure zones to have different network interface and network

i need to configure a zone to use different interface (bge2) than global and have connected to completely different network switch & to use its own defaultrouter and hosts file .. is it possible ..if so ..how ? Thanks

4. UNIX for Advanced & Expert Users

Multiple interface same network

hi I have a question, eth0 : 192.168.2.10 eth1: 192.168. 2.11 subnet : 255.255.255.0 eth0 and eth1 plug same swich I want communication between the two interface one host examp : ping 192.168.2.10 -I eth1 ping 192.168.2.11 -I eth0 but not respons.. pls helme

5. UNIX and Linux Applications

Access to network interface (Mac-network)

Hi, I'm a italian student. For my thesis I develop a gateway with protocol 6lowpan. For that I must access to network interface to develope my personal stack based on standard 802.15.4. Can you help me? I need an explanation for that.

6. IP Networking

Network interface-

Hello, Please what's the difference between: AND Thank you so much

7. IP Networking

network interface -

Hello, Please, how can i create a network interface with a routable IP address on linux (ubuntu) ? AND How can i desactivate an interface? Thank you so much for help.

8. Solaris

No network cable But Network interface is UP and Running

I've one Netra 240 After changing main board and system configuration card reader, Network is not accessible any more, Network interfaces are always UP and Running even when there is no cable connected to Network interfaces. I tried to restart and plumb/unplumb with no luck. ifconfig -a...

9. UNIX for Dummies Questions & Answers

Adding a network interface to a bonded interface

I have a RHEL 5 system with a bonded interface configure using only one network port (eth0). So I have config file for ifcfg-bond0 and ifcfg-eth. I'd like to configure eth5 to be the second SLAVE in the bond. My question is, after I modify ifcfg-eth5, can I add eth5 to the bond0 interface without...

10. AIX

Misconfiguration detected Adapter interface name en 3 Adapter offset 0

Hi, We had a hardware problem with an IBM System p5 server, with AIX 5.2 We restore from a tape the last backup we had, but the server does not boot up as expected. The server try to mount some directories from a storage, but could not comunicate with them, we check the FC and everything is...

LEARN ABOUT PLAN9

httppower

httppower(8)							     powerman							      httppower(8)

NAME

       httppower - communicate with HTTP based power distribution units

SYNOPSIS

       httppower [--url URL]

DESCRIPTION

       httppower  is  a  helper program for powerman which enables it to communicate with HTTP based power distribution units.	It is run interac-
       tively by the powerman daemon.

OPTIONS

       -u, --url URL
	      Set the base URL.

INTERACTIVE COMMANDS

       The following commands are accepted at the httppower> prompt:

       auth user:pass
	      Authenticate to the base URL with specified user and password, using ``basic'' HTTP authentication which sends the user and password
	      over the network in plain text.

       seturl URL
	      Set the base URL.  Overrides the command line option.

       get [URL-suffix]
	      Send an HTTP GET to the base URL with the optional URL-suffix appended.

       post [URL-suffix] key=val[&key=val]...
	      Send an HTTP POST to the base URL with the optional URL-suffix appended, and key-value pairs as argument.

FILES

       /usr/sbin/httppower
       /etc/powerman/powerman.conf

ORIGIN

       PowerMan was originally developed by Andrew Uselton on LLNL's Linux clusters.  This software is open source and distributed under the terms
       of the GNU GPL.

SEE ALSO

       powerman(1), powermand(8), httppower(8), plmpower(8), vpcd(8), powerman.conf(5), powerman.dev(5), powerman-devices(7).

       http://sourceforge.net/projects/powerman

powerman-2.3.5							    2009-02-09							      httppower(8)