11-10-2005
Quote:
Originally Posted by Awadhesh
M.H.
Actually the same problem with me as Perderabo, i also never seen this workstation. Pls take help of some hardware engineer to disconnect the disk. or remove all disks from workstaition, u have to identify all parts of ur workstation.
Awadhesh
Awadhesh Hi,
Thank you very much for the response and your concern.
With regard to identification of the parts, I can identify them OK, thanks to you and Perderabo for sending me the links. But I am having difficulty disconnecting and removing the hard disk from the workstation as you have suggested.
As mentioned in one of my pervious threads, I have disconnected a wide 25-pin whole grey/bluish ribbon (I though I disconnected the hard disk) but when powered “ON” the machine, it booted and went all the way to CDE asking for “login ID”.
There was another ribbon (white and narrow) looks a bit complicated and I was not sure for touching that, therefore I sent you a mail describing both ribbons and was looking to receive some advise on them.
Really, I do not know who is a Hardware Engineer as such on the Forum. But I am hoping one day someone to send me a clear instruction to resolve this.
Regards,
M.H
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
Can anybody tell me how can I create an account without having to enter the password after editing the vipw file. I mean the system should automatically take care of the password encryption in the shadow file and I don't to enter the password again and the Account should be ready to go.
... (3 Replies)
Discussion started by: syedifti
3 Replies
2. Programming
hi there, i need help :( im trying to produce a program that would do the following, but i dont know were to begin, any help/guide lines, please im need help asap,
One program is the main program, which fork/execs one referee process and
three x,y,z processes repectvley. It then waits until... (0 Replies)
Discussion started by: zmanultra
0 Replies
3. Shell Programming and Scripting
in a ksh script, i want to process
some string variables using awk,
and then i want to go on using this variables
in the same ksh (out of awk lines)
can anybody send me a very simple example about this? (0 Replies)
Discussion started by: gfhgfnhhn
0 Replies
4. Shell Programming and Scripting
I'm wanting to get user interaction...textbox or checkboxes would be great. I want to allow someone to enter data into textbox. (this is the time I want to grab a photo from) Then I want to be able to check the different sizes I want for the image. Say 4 options.
Is this possible using the... (0 Replies)
Discussion started by: mainegate
0 Replies
5. Shell Programming and Scripting
Hi All, I have been trying to get an Expect program to communicate with a Remote Power Switch which will eventually log in, and then turn on/off certain outlets. For some reason, I can't get through the log in procedure with this Switch. When you first spawn the telnet, you get the Switch... (1 Reply)
Discussion started by: mrjgs70
1 Replies
6. Shell Programming and Scripting
Hi I have a script which is coming up with errors when I iterate over a list of database names. When I print out the values it shows a title & underline...if I then attach "hi" to the print out I get :
hi
TBS_SVC_NAME hi
------------------------------ hi
bkahepa hi
hi
echo "select... (14 Replies)
Discussion started by: Dird
14 Replies
7. UNIX for Advanced & Expert Users
If I use to PAM to validate a vsftp user using a remote service to do the validation and the user does not exist on the system locally, then what becomes the home directory for the user logging in via vsftp?
Assuming that chroot_user_list is enable to limit all users to their home directory. (0 Replies)
Discussion started by: ChrisC
0 Replies
8. Shell Programming and Scripting
Sorry for my english!
I'm using Debian squeeze and for an assignement, i have create 2 virtual pdf cups printers. Both are working very well.
To test the different administion command; i try to disable one of the printer and move his queue file to the second one. I'm able to do it easily.
... (4 Replies)
Discussion started by: lyapma
4 Replies
9. Shell Programming and Scripting
Hi,
I am trying to ssh into a remote machine and then enter a vserver on the remote machine. I am using here document to carry out these commands on the remote machine. My here document looks like this
ssh username@remotemachine << HERE
sudo vserver vservername enter
HERE
however the sudo... (0 Replies)
Discussion started by: mnanavati
0 Replies
10. Shell Programming and Scripting
Hello everybody,
I isolated an issue: please try the following script (under AIX)
#!/usr/bin/ksh93
echo "Before Perl: \c"
read line
echo "|$line|"
perl -e 'print "Perl invocation";'
echo
echo "After Perl: \c"
read line
echo "|$line|"
On the first input, type Ctrl-D. It works... (13 Replies)
Discussion started by: jlovi
13 Replies
LEARN ABOUT DEBIAN
ardour2
ARDOUR(1) General Commands Manual ARDOUR(1)
NAME
ardour - a digital audio workstation
SYNOPSIS
ardour -b [-U file] [session]
ardour --help
DESCRIPTION
Ardour is a multichannel hard disk recorder (HDR) and digital audio workstation (DAW). It is capable of simultaneous recording 24 or more
channels of 32 bit audio at 48kHz. Ardour is intended to function as a "professional" HDR system, replacing dedicated hardware solutions
such as the Mackie HDR, the Tascam 2424 and more traditional tape systems like the Alesis ADAT series. It is also intended to provide the
same or better functionality as software systems such as ProTools, Samplitude, Logic Audio, Nuendo and Cubase VST (we acknowledge these and
all other names as trademarks of their respective owners). It supports MIDI Machine Control, and so can be controlled from any MMC con-
troller, such as the Mackie Digital 8 Bus mixer and many other modern digital mixers.
OPTIONS
-b Print all possible keyboard binding names.
-U Specify the path to the GTK RC file to use. The provided one is called ardour_ui.rc and lives in the top level Ardour source direc-
tory. This file controls all color and font use within Ardour. Ardour will run without it, but its appearance is, uhm, ugly.
--help Displays the help message.
FILES
ardour.rc
Defaults and startup settings for Ardour.
ardour_ui.rc
Definitions for the Ardour interface.
ENVIRONMENT
ARDOUR_RC
Path to ardour.rc.
ARDOUR_SYSTEM_RC
Path to the ardour_system.rc
LADSPA_PATH
Path to LADSPA plugins.
BUGS
Yes. http://ardour.org/mantis is the preferred bugtracker.
AUTHOR
Paul Davis. Do not contact him directly. Instead, contact him at <ardour-dev@lists.ardour.org>. You can subscribe here:
http://lists.ardour.org/listinfo.cgi/ardour-dev-ardour.org
2002-12-29 ARDOUR(1)