11-10-2005
Quote:
Originally Posted by Awadhesh
M.H.
Actually the same problem with me as Perderabo, i also never seen this workstation. Pls take help of some hardware engineer to disconnect the disk. or remove all disks from workstaition, u have to identify all parts of ur workstation.
Awadhesh
Awadhesh Hi,
Thank you very much for the response and your concern.
With regard to identification of the parts, I can identify them OK, thanks to you and Perderabo for sending me the links. But I am having difficulty disconnecting and removing the hard disk from the workstation as you have suggested.
As mentioned in one of my pervious threads, I have disconnected a wide 25-pin whole grey/bluish ribbon (I though I disconnected the hard disk) but when powered “ON” the machine, it booted and went all the way to CDE asking for “login ID”.
There was another ribbon (white and narrow) looks a bit complicated and I was not sure for touching that, therefore I sent you a mail describing both ribbons and was looking to receive some advise on them.
Really, I do not know who is a Hardware Engineer as such on the Forum. But I am hoping one day someone to send me a clear instruction to resolve this.
Regards,
M.H
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
Can anybody tell me how can I create an account without having to enter the password after editing the vipw file. I mean the system should automatically take care of the password encryption in the shadow file and I don't to enter the password again and the Account should be ready to go.
... (3 Replies)
Discussion started by: syedifti
3 Replies
2. Programming
hi there, i need help :( im trying to produce a program that would do the following, but i dont know were to begin, any help/guide lines, please im need help asap,
One program is the main program, which fork/execs one referee process and
three x,y,z processes repectvley. It then waits until... (0 Replies)
Discussion started by: zmanultra
0 Replies
3. Shell Programming and Scripting
in a ksh script, i want to process
some string variables using awk,
and then i want to go on using this variables
in the same ksh (out of awk lines)
can anybody send me a very simple example about this? (0 Replies)
Discussion started by: gfhgfnhhn
0 Replies
4. Shell Programming and Scripting
I'm wanting to get user interaction...textbox or checkboxes would be great. I want to allow someone to enter data into textbox. (this is the time I want to grab a photo from) Then I want to be able to check the different sizes I want for the image. Say 4 options.
Is this possible using the... (0 Replies)
Discussion started by: mainegate
0 Replies
5. Shell Programming and Scripting
Hi All, I have been trying to get an Expect program to communicate with a Remote Power Switch which will eventually log in, and then turn on/off certain outlets. For some reason, I can't get through the log in procedure with this Switch. When you first spawn the telnet, you get the Switch... (1 Reply)
Discussion started by: mrjgs70
1 Replies
6. Shell Programming and Scripting
Hi I have a script which is coming up with errors when I iterate over a list of database names. When I print out the values it shows a title & underline...if I then attach "hi" to the print out I get :
hi
TBS_SVC_NAME hi
------------------------------ hi
bkahepa hi
hi
echo "select... (14 Replies)
Discussion started by: Dird
14 Replies
7. UNIX for Advanced & Expert Users
If I use to PAM to validate a vsftp user using a remote service to do the validation and the user does not exist on the system locally, then what becomes the home directory for the user logging in via vsftp?
Assuming that chroot_user_list is enable to limit all users to their home directory. (0 Replies)
Discussion started by: ChrisC
0 Replies
8. Shell Programming and Scripting
Sorry for my english!
I'm using Debian squeeze and for an assignement, i have create 2 virtual pdf cups printers. Both are working very well.
To test the different administion command; i try to disable one of the printer and move his queue file to the second one. I'm able to do it easily.
... (4 Replies)
Discussion started by: lyapma
4 Replies
9. Shell Programming and Scripting
Hi,
I am trying to ssh into a remote machine and then enter a vserver on the remote machine. I am using here document to carry out these commands on the remote machine. My here document looks like this
ssh username@remotemachine << HERE
sudo vserver vservername enter
HERE
however the sudo... (0 Replies)
Discussion started by: mnanavati
0 Replies
10. Shell Programming and Scripting
Hello everybody,
I isolated an issue: please try the following script (under AIX)
#!/usr/bin/ksh93
echo "Before Perl: \c"
read line
echo "|$line|"
perl -e 'print "Perl invocation";'
echo
echo "After Perl: \c"
read line
echo "|$line|"
On the first input, type Ctrl-D. It works... (13 Replies)
Discussion started by: jlovi
13 Replies
LEARN ABOUT OSF1
volreattach
volreattach(8) System Manager's Manual volreattach(8)
NAME
volreattach - Reattaches disk drives that have once again become accessible
SYNOPSIS
/usr/sbin/volreattach [-rb] [accessname...]
/usr/sbin/volreattach -c accessname
OPTIONS
The volreattach utility has the following options: Calls the volrecover utility to attempt to recover stale plexes of any volumes on the
failed disk. Performs the reattach operation in the background. Checks whether a reattach is possible. No operation is performed, but the
name of the disk group and disk media name at which the disk can be reattached is displayed.
DESCRIPTION
The volreattach utility attempts to reattach disks using the same disk group and media names they had before detachment.
This operation may be necessary if a disk has a transient failure, or if some disk drivers are unloaded or unloadable when the Logical
Storage Manager is started, causing disks to enter the failed state.
If the problem is fixed, the volreattach command can be used to reattach the disks without plexes being flagged as stale, as long as the
reattach happens before any volumes on the disk are started.
The volreattach command is called from the voldiskadm menus as part of disk recovery.
The volreattach utility tries to find a disk with a disk group and disk ID matching that of the disk(s) being reattached. If the matching
disk is found, the reattach operation may still fail if the original cause (or some other cause) for the disk failure still exists.
EXIT CODES
A zero exit status is returned if it is possible to perform a reattach. Otherwise, non-zero is returned.
SEE ALSO
volintro(8), voldiskadm(8), volrecover(8)
volreattach(8)