Sponsored Content
Full Discussion: ping and telnet
Special Forums IP Networking ping and telnet Post 8047 by brbeck7 on Thursday 4th of October 2001 11:24:53 PM
Old 10-05-2001
Hammer & Screwdriver

You may have a different IP or rights to another
network segment.Smilie
 

10 More Discussions You Might Find Interesting

1. SCO

Openserver 5.0.4 can't be ping or telnet into from a remote site

Hi, Can anybody help me out why l can't not ping my server with Openserver 5.0.4 with my windows machine from a remote site. The machine could see the local LAN with the Router however, i can't ping or telnet unto the server from another site on the WAN. The default gateway was configure on the... (0 Replies)
Discussion started by: kayode
0 Replies

2. AIX

Ping/Telnet is not happening

Hi All, We are not able to ping to a AIX box...Network is ok..when we give ping from that AIX box..it is giving 0821-067 ping: The socket creation call failed.there is no enough buffer space for the requested socket operation. refresh -s inetd is also giving socket error. Please help to... (1 Reply)
Discussion started by: b_manu78
1 Replies

3. IP Networking

can ping but can not telnet UNIX

I have one problem and it is giving me hard time I can ping my windows machine root@x1ChXpress:/sbin >ping 192.168.129.66 192.168.129.66 is alive root@x1ChXpress:/sbin >netstat -rn Routing Table: Destination Gateway Flags Ref Use Interface... (3 Replies)
Discussion started by: amon
3 Replies

4. Infrastructure Monitoring

no telnet, ping ok...

We have a Sun Solaris Netra 20 server. Our O&M Server gets Alarm Processor not responding. When Alarm occurs, you can ping the sun server but cannot telnet it. We keep getting Interrupt level not serviced. var/adm/message log is > tail -f messages Apr 12 20:09:56 cama pcisch: PCI-device:... (9 Replies)
Discussion started by: krabu
9 Replies

5. UNIX for Dummies Questions & Answers

Only execute telnet and ping for user

Hello for all! This is the situation: I must create many users that only can execute telnet and ping. Create users is not a problem, but I donīt know how limit the users privileges, to only execute telnet and ping. I hope you can help me. Thank's for all. Bye :) PD: Sorry for my... (4 Replies)
Discussion started by: bobbasystem
4 Replies

6. UNIX for Advanced & Expert Users

ping and telnet - HP-UX

Hi all, I am not sure if my problem is specific to HP-UX or not. Hopefully someone can tell me what's wrong. I have a server name server1 10.100.50.10 in the /etc/hosts file and if I do a ping server1, it shows the right IP address. However, if I run telnet server1, it is not using... (4 Replies)
Discussion started by: newbie_01
4 Replies

7. AIX

ping OK - telnet refused

Hi, After a crash of our older AIX server it happend as it is in the title: ping is ok, but telnet: What it can be this strange thing? Franci (2 Replies)
Discussion started by: frajer
2 Replies

8. UNIX for Dummies Questions & Answers

ping,telnet, traceroute

can you provide the command in solaris8 if I wanted to ping,telnet, traceroute an IP address with a port? thanks (1 Reply)
Discussion started by: lhareigh890
1 Replies

9. Shell Programming and Scripting

ping and telnet timeout

Hello, I need help, I have the following which save in the result file ping and telnet:port test. Basically the script works but I should implement a check on ping and telnet command so that ping has 5 seconds threshold and telnet (more important) 10 seconds. Over that threshold ping and... (0 Replies)
Discussion started by: marmellata
0 Replies

10. BSD

Ping remote sever, nc, telnet, whatever

I put this thread to shell and bsd, because I want to resolve this matter on bsd. May somebody can explain to me how to ping a remote server, in unix. BTW the following code examples were tried on a linux system as well, with the same output, nothing. But on my bsd are not installed nmap neither... (4 Replies)
Discussion started by: 1in10
4 Replies
network-test(1) 						  ifupdown-extra						   network-test(1)

NAME
network-test - check the network and test if everything is fine SYNOPSIS
network-test DESCRIPTION
The network-test program will test your system's network configuration using basic tests and providing both information (INFO), warnings (WARN) and possible errors (ERR) based on the results of these tests. It will check and report on: * Status of the network interfaces of the system including: link status, IP addressing and number of transmitted packets and error rates. * Accessibility to configured routes to external networks, including the default network route, checking the routers configured to give access to the network * Proper host resolution, testing DNS resolution against a known host. * Proper network connectivity, testing reachability of remote hosts using ICMP and simulating a web connections to a remote web server (the web server used for the tests can be configured through the environment, see below) The program does not need special privileges to run as it does not do any system change. However, the behaviour of the program when running as an unprivileged user is not the same as running as system administrator (i.e. root). If the program is run as system administrator it will try to run some tools that are only available to it to speed up some of the tests. The program relies on the use of ip, netstat, ifconfig, arp and (when running as root) ethtool or mii-tool, to obtain information about the system's networking configuration (status of available interfaces and configured network routes). It also uses ping, host and nc (netcat) to do tests of the network connectivity and ensure that the host can connect to the Internet. ENVIRONMENT
The program will, by default, check www.debian.org and its associated web server. If you want to use a different check host you can setup the environment as follows: CHECK_HOST The name of a host to use when testing DNS resolution. CHECK_IP_ADRESS The IP address of the host defined in CHECK_HOST CHECK_WEB_HOST The web server to use for testing purposes when testing network connectivity. CHECK_WEB_PORT The web server port of server CHECK_WEB_HOST that will be used for testing. EXIT STATUS
The program will exit with error (1) if any of the network checks fail. BUGS
This program does not have super cow powers so it is unable to fix the errors by itself. It is also unable to detect if the network is failing due to a local firewall policy been in place so make sure you check your system logs with dmesg (1) to detect if some of the active tests are being dropped due to your local firewall. Other known issues that might make the program not work reliable are: * IPv6: The program does not yet explicitly handle IPv6 only hosts, some of the tests might be biased towards IPv4 and might fail in IPv6 environments. * Proxies: The program does not check network connectivity for hosts that connect through the Internet using a proxy gateway for services. The program might report issues in hosts using proxies even when these might connect to the Internet properly through proxied services. * Firewall environments: some of the tests rely on direct connectivity to external hosts, which are tested using ICMP queries (through the use of ping. These tests might fail in hosts installed in networking environments with firewalls that block outbound ICMP communication. SEE ALSO
ip (8), netstat (8), ifconfig (8), ethtool (8), mii-tool (8), ping (8), nc (1) and host (1). AUTHOR
network-test was written by Javier Fernandez-Sanguino for the Debian GNU/Linux distribution. COPYRIGHT AND LICENCE
Copyright (C) 2005-2011 Javier Fernandez-Sanguino <jfs@debian.org>. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. On Debian systems, a copy of the GNU General Public License may be found in /usr/share/common-licenses/GPL. ifupdown-extra August 23 2011 network-test(1)
All times are GMT -4. The time now is 11:28 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy