adaptec scsi host adapter Post: 7329

10 More Discussions You Might Find Interesting

1. Filesystems, Disks and Memory

Move hard disk to another SCSI host

I was using an external SCSI disk on a Sun Ultra60 (Solaris 7) as the boot device. It was labelled c1t0d0. I then moved it into the internal removable mounts and it should become c0t0d0, but it apparently didn't change properly. When the machine boots, it gets host information from the disk...

2. Solaris

Which SCSI Adapter?

Hi. I need to find a simple SCSI adapter card for a Sun Ultra 5 workstation. I don't need the type w/ ethernet attached (e.g. X1032) as I already have ethernet onboard & they are more spendy. I know Adaptec is out, but what unit would work? I am attaching an external SCSI tape unit to this...

3. Solaris

Trouble Installing a SCSI Adapter

Okay. I admit I'm sort of a newbie in this regard. I installed a SCSI adapter on a Sun Ultra 5 workstation. I did the standard STOP-A on the startup and got the OK prompt. I then tried probe-scsi-all. It dumps me back @ the OK prompt w/ no message whatsoever. I tried probe-scsi, nothing. ...

4. AIX

Spliting PCI-X Dual Channel Ultra320 SCSI Adapter

I have 1 PCI-X Dual Channel Ultra320 SCSI Adapter card for my p570 server. I would like to split the 2 channels for the usage of 2 tape drives in different LPARs. Is that possible? For example, I have 2 LPARs running in p570 server, LPAR-A configured the Ultra320 card as pci7 in slot...

5. SCO

configure Adaptec 29320ALP Ultra 320 SCSI Card in IBM X3400

I am installing SCO UNIX 5.0.6 in X3400, every thing are install except Adaptec 29320ALP Card (Attached DAT Drive) because their driver are available in btld formate Fllopy DISk and SCO Unix 5.0.6 not support USB Floppy, Can anybody inform us any other method to installed the Adaptec Ultra 120...

6. UNIX and Linux Applications

Adaptec ARCCONF on sun

Hey everyone. I am trying to set up four sun servers. They all came with an adaptec storagetek raid liveCD. On the liveCD there is a utility called "Arcconf" which is supposed to be used to configure the storage arrays. The example given in their documentation uses this as an example: ARCCONF...

7. Hardware

SCSI Ultra320 80->68 adapter

I need to connect 80pin SCA Ultra320 SCSI hdd to 68pin. There are rumors that some bad "passive" adapters with problematic termination can fry the HDD. The adapter we got is Assmann ABSCA-2. Hard drive is 'Fujitsu MAW3073NC' Do we need to set any jumpers before turning it on? We already had...

8. SCO

Moving hard drive and SCSI adapter to another computer

OK group, it's been 12 years since I worked with SCO. I need some direction here: SCO Openserver 5.07 I have a server with a bad motherboard. I have moved the SCSI adapter and hard drive to another computer. This new server has different hardware so I must install the chipset drivers for...

9. HP-UX

HPUX 11.11 Sept.2003 cannot see PCI-X scsi adapter

I am trying to reload a RP4440 with 2x300gb disks and dual Port Network card, with HPUX 11.11 Sept 2003. When the os boots and and gets to the main menu to install HPUX or run recovery, it cannot find the disks or NIC. At the OS prompt (after loading files), ioscan shows the Class ba, and shows...

10. AIX

Misconfiguration detected Adapter interface name en 3 Adapter offset 0

Hi, We had a hardware problem with an IBM System p5 server, with AIX 5.2 We restore from a tape the last backup we had, but the server does not boot up as expected. The server try to mount some directories from a storage, but could not comunicate with them, we check the FC and everything is...

LEARN ABOUT HPUX

st

st(1M)																	    st(1M)

NAME

       st - shared tape administration

SYNOPSIS

       device_file

DESCRIPTION

       The  command  provides  users  with a command-line interface to check the status of a shared tape device or to reclaim a shared tape device
       from a host system that has failed while holding a reservation on the shared tape device.  The command can also be used for the	same  pur-
       pose on shared library robotic devices.	To use the command you must have root user id.

       Please see examples below for usage.

   Options
       recognizes the following options and arguments:

       Specifies the tape device file or sctl/esctl pass-through device
		      file for the shared tape/library device. This parameter is mandatory and will report an error if device_file is omitted.

       Allows the user to reclaim a shared tape device or shared
		      library robotic device in the case where a host failed while holding a reservation on the shared device.	This option causes
		      a bus device reset to be issued to the device specified by the option.

       Prints out the current status of the shared tape/library
		      device specified by the option.

RETURN VALUE

       returns 0 upon successful completion and 1 otherwise.

EXAMPLES

       The following shows three examples of output from the above command.

       The above output indicates that the shared device is reserved by another host and is therefore unavailable at this time.

       The above output indicates that the shared device is not ready for use at this time.

       The above output indicates that the shared device is ready for use at this time.

       To reclaim a shared tape/library device from a failed host, the following command can be used:

WARNINGS

       The option must be used with care. When reclaiming devices, it must be ensured that the host from which the device is being  reclaimed  has
       in fact failed, as data may be lost as the result of reclaiming a device that is currently in use by another host.

AUTHOR

       was developed by Hewlett-Packard.

SEE ALSO

       mt(1), scsi(7), scsi_ctl(7).

																	    st(1M)