03-29-2005
Tape Drive error
I have a hp d 350 running on 10.2,im having a problem with the dds2 tape drive whenever i tried backing up larger files...i have remove the tape driver and add it using sam again but still the tape drive is not working .....is there a solution to this problem?
# tar cvf /dev/rmt/0m priso.ds
a priso.ds 42 blocks
# tar -tvf /dev/rmt/0m
Tar: tape read error
# tar -cvf /dev/rmt/0m pfsrm.db
a pfsrm.db 401504 blocks
Tar: end of tape
Tar: to continue, enter device/file name when ready or null string to
quit.
Tar: couldn't open À
Tar: to continue, enter device/file name when ready or null string to
quit.
User entered a null name for next device file.
# tar cvf /dev/rmt/0m pfspt.db
a pfspt.db 686464 blocks
Tar: end of tape
Tar: to continue, enter device/file name when ready or null string to
quit.
User entered a null name for next device file.
#
i have another server running the same tape drive and below is are the drivers?is there something wrong with the drivers?
ON OUR HP SERVER(9000/G50):
# ioscan -fnC tape
Class I H/W Path Driver S/W State H/W Type Description
==============================================================
tape 0 52.0.0 tape2 CLAIMED DEVICE HP C1533A
/dev/diag/rmt/c0t0d0 /dev/rmt/c0t0d0BEST
/dev/rmt/0m /dev/rmt/c0t0d0BESTb
/dev/rmt/0mb /dev/rmt/c0t0d0BESTn
/dev/rmt/0mn /dev/rmt/c0t0d0BESTnb
/dev/rmt/0mnb
#
ON LEASED HP SERVER(D350):
# ioscan -fnC tape
Class I H/W Path Driver S/W State H/W Type Description
=====================================================================
tape 0 8/16/5.0.0 stape CLAIMED DEVICE HP C1533A
/dev/rmt/0m /dev/rmt/c2t0d0BESTn
/dev/rmt/0mb /dev/rmt/c2t0d0BESTnb
/dev/rmt/0mn /dev/rmt/c2t0d0DDS
/dev/rmt/0mnb /dev/rmt/c2t0d0DDSb
/dev/rmt/c2t0d0BEST /dev/rmt/c2t0d0DDSn
/dev/rmt/c2t0d0BESTb /dev/rmt/c2t0d0DDSnb
#
8 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
hello,
I don't know what exactly the cause and the solution!!
suddenly I receive this error message when I want to use the 8mm tape drive
"I/O write error"
I disconnect the tape drive and I hook it in another WS and I receive this error :- ... (5 Replies)
Discussion started by: geoquest
5 Replies
2. Solaris
Hi,
I am a newbie to Solaris, I have a SunFire V120 box, i was trying to install a tape drive(HP SureStore DAT24), i did the install in this manner.
# rm -rf /etc/path_to_inst
# init 6
later at the "ok" prompt i gave "boot -ar" after doing that it asked me various options i accepted the... (2 Replies)
Discussion started by: rajendra.rait
2 Replies
3. SCO
i have an ibm machine with dds4 drive running sco. i bought new hp dds4 tape for my back-up. the new tapes are not being read by the system, it says tape error, no such device. i've already clean the drive several times but still the same error occur. i've tried to use the same tape on our windows... (3 Replies)
Discussion started by: yackim
3 Replies
4. UNIX for Dummies Questions & Answers
Hi,
I need to restore my tape backup, when I type "tape status" it gives;
status : ready beginning-of-tape write-protected
soft errors : 0
hard errors : 0
underruns : 3
but... (4 Replies)
Discussion started by: alisevA3
4 Replies
5. Solaris
Well I have just added new tape drive to my server (lto)
However I am getting few errors in using it. I have checked status with
#iostat -En : giving me few hard errors, few soft errors and execution error.
Also tape status is not visible as "no sense" its coming as "no additional sense".
I... (5 Replies)
Discussion started by: saurabh84g
5 Replies
6. AIX
Hi All
I am trying to copy files present in a partition (server 2) which is mounted to a different server (server 1) as tape drive is connected to it. I ran the below command to copy files within a partition:
svr01:root:/sunfileserver> tar -cvf *
a <foldername>/<filename>/<filename>
a... (4 Replies)
Discussion started by: vathsan
4 Replies
7. Solaris
Hey folks,
Linux admin here, forced to use Opensolaris to try to use ufsdump/ufsrestore to get some data of some old tapes.
I've got Opensolaris 2009.06 on x86 and a Sony SDX-700V.
As a "control" experiment, I booted the system with a Linux live CD and the tape drive worked perfectly.
... (2 Replies)
Discussion started by: eddy_sysad
2 Replies
8. HP-UX
HP rp5450 (L2000)
running HP-UX 11.11B
Using DLT 7000 and DLT 4000 tape drives for nightly full backups
Backup jobs created by SAM
DLT 7000 cron entry is as follows:
00 2 * * 1-6 /usr/sam/lbin/br_backup DLT FULL Y /dev/rmt/0m /var/sam/graphLCAa17036 root Y 1 N > /var/sam/SAM_br_msgs 2>&1... (1 Reply)
Discussion started by: dreh99
1 Replies
tz(4) Kernel Interfaces Manual tz(4)
Name
tz - SCSI magnetic tape interface
Syntax
VAX NCR 5380:
adapter uba0 at nexus?
controller scsi0 at uba0 csr 0x200c0080 vector szintr
tape tz0 at scsi0 drive 0
VAX DEC SII:
adapter ibus0 at nexus?
controller sii0 at ibus? vector sii_intr
tape tz0 at sii0 drive 0
RISC DEC SII:
adapter ibus0 at nexus?
controller sii0 at ibus? vector sii_intr
tape tz0 at sii0 drive 0
RISC DEC KZQ:
adapter uba0 at nexus?
controller kzq0 at ibus? csr 0761300vector sii_intr
tape tz0 at kzq0 drive 0
RISC NCR ASC:
adapter ibus0 at nexus?
controller asc0 at ibus? vector ascintr
tape tz0 at asc0 drive 0
Description
The SCSI tape driver provides a standard tape drive interface as described in This is a driver for any Digital SCSI tape device.
For the TZK10 QIC format tape drive, the densities supported are QIC-24 (read only) block size of 512 byte blocks, QIC-120, and QIC-150
read/write block size of 512 byte blocks, and QIC-320 read/write block size of 1024 byte blocks. With QIC format style tapes all reads and
writes must be in multiple of the block size. This is a requirement of fixed block tape drives because record boundaries are not pre-
served. The QIC densities are selected using the following special device names:
QIC-24 Fixed block size.
QIC-120 Fixed block size.
QIC-150 Fixed block size.
QIC-320 Fixed block size.
With all fixed block tape devices a of a file to the tape must be padded out. An example of this is a of which has a size of approximately
3800 bytes.
dd if=/etc/gettytab of=/dev/rmt0h bs=10k conv=sync
or
dd if=/etc/gettytab of=/dev/rmt0l bs=512 conv=sync
The option of pads the output to block size.
This driver also supports n-buffered reads and writes to the raw tape interface (used with streaming tape drives). See for further
details.
Tape Support
TZ30, TZK50, TLZ04, TSZ05, TKZ08, TZK10
Diagnostics
All diagnostic messages are sent to the error logger subsystem.
Files
See Also
mtio(4), nbuf(4), SCSI(4), MAKEDEV(8), uerf(8), tapex(8)
Guide to the Error Logger
tz(4)