03-18-2005
Also, I suspect some loose contact b/w the HBA and the disks. In the show dev, if you are able to see some thing like pka and pkb, then you have the interface being detected properly. And if you have any devices physicall attached to the either pka or pkb interface cards then they would be listed either dka or dkb respectively w.r.t interface cards. But what ever it is when ever you play with any hardware, don't forget to always initizliaze the system to detect the hardware changes via., the init command and then only run the show device command.
But don't forget to update us on the status, this is a pertty much interesting and challenging stuff to work on with. :>) Happy trouble shooting.
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
I need to change the pka0_host_id 7 to 6 but the command "set pka0_host_id 6" returns "pka0_host_id protected from attempted operation".
How can i do that? please i need some answers soon!!!!! thanx (1 Reply)
Discussion started by: Lestat
1 Replies
2. HP-UX
I have a DS25 and when i run "show device" don't appear my 'dka.....' and 'dkb....' devices, but i know they must be there, where could be the error? what can i do to see them? (3 Replies)
Discussion started by: Lestat
3 Replies
3. UNIX for Advanced & Expert Users
I need to change the pka0_host_id 7 to 6 but the command "set pka0_host_id 6" returns "pka0_host_id protected from attempted operation".
How can i do that? please i need some answers soon!!!!! thanx (1 Reply)
Discussion started by: Lestat
1 Replies
4. UNIX for Dummies Questions & Answers
/dev/rmt/0: No such device or address
I get this when I do a "mt -f /dev/rmt/0 rewind"
This is on a Solaris 7 system.
I tried
devfsadm -c tape
and
drvconfig ; tape
and both didn't work.
Help please....... :confused: (4 Replies)
Discussion started by: shorty
4 Replies
5. Emergency UNIX and Linux Support
Dear All,
I was having powerpath 5.2 on SUN server with SVM connected to CLARIION box.Please find the following output :
root # powermt display dev=all
Pseudo name=emcpower3a
CLARiiON ID=CK200073400372
Logical device ID=60060160685D1E004DD97FB647BFDC11
state=alive; policy=CLAROpt;... (1 Reply)
Discussion started by: Reboot
1 Replies
6. Shell Programming and Scripting
Hi,
I am reading a directory that has a list of jar files. I am searching these files for specific keywords. What i would like to do is write the address of the jar file to a new file if the search result is returned as false. For example;
/home/user/JarDirectory/Examplefile.jar
... (2 Replies)
Discussion started by: crunchie
2 Replies
7. Shell Programming and Scripting
Hi,
I have line in input file as below:
3G_CENTRAL;INDONESIA_(M)_TELKOMSEL;SPECIAL_WORLD_GRP_7_FA_2_TELKOMSEL
My expected output for line in the file must be :
"1-Radon1-cMOC_deg"|"LDIndex"|"3G_CENTRAL|INDONESIA_(M)_TELKOMSEL"|LAST|"SPECIAL_WORLD_GRP_7_FA_2_TELKOMSEL"
Can someone... (7 Replies)
Discussion started by: shis100
7 Replies
8. UNIX for Dummies Questions & Answers
How to use "mailx" command to do e-mail reading the input file containing email address, where column 1 has name and column 2 containing “To” e-mail address
and column 3 contains “cc” e-mail address to include with same email.
Sample input file, email.txt
Below is an sample code where... (2 Replies)
Discussion started by: asjaiswal
2 Replies
9. Red Hat
Dear Concern,
We have observed that following command stuck/does not work in some RedHat nodes. Please advise us to troubleshoot the issue.
/usr/sbin/hpacucli ctrl all show
Note: HP Array Configuration Utility CLI for Linux 64-bit
With Best Regards,
Md. Abdullah-Al Kauser (3 Replies)
Discussion started by: makauser
3 Replies
10. UNIX for Beginners Questions & Answers
I am using the bash shell.
When I view my recent command history using the "history" command from the prompt, it only shows me the commands starting at #928.
The commands I need are earlier than that, but I can't figure out how to make the other 927 display.
They are in my .bash_history... (1 Reply)
Discussion started by: Twinklefingers
1 Replies
SB(4) BSD Kernel Interfaces Manual SB(4)
NAME
sb -- SoundBlaster family (and compatible) audio device driver
SYNOPSIS
sb0 at isa? port 0x220 irq 5 drq 1 drq2 5
sb1 at isa? port 0x240 irq 7 drq 1 flags 1
sb* at isapnp?
sb* at pnpbios? index ?
audio* at audiobus?
midi* at sb?
mpu* at sb?
opl* at sb?
DESCRIPTION
The sb driver provides support for the SoundBlaster, SoundBlaster Pro, SoundBlaster 16, Jazz 16, SoundBlaster AWE 32, SoundBlaster AWE 64,
and hardware register-level compatible audio cards.
The SoundBlaster series are half-duplex cards, capable of 8- and 16-bit audio sample recording and playback at rates up to 44.1kHz (depending
on the particular model).
The base I/O port address is usually jumper-selected to either 0x220 or 0x240 (newer cards may provide software configuration, but this
driver does not directly support them--you must configure the card for its I/O addresses with other software). The SoundBlaster takes 16 I/O
ports. For the SoundBlaster and SoundBlaster Pro, the IRQ and DRQ channels are jumper-selected. For the SoundBlaster 16, the IRQ and DRQ
channels are set by this driver to the values specified in the config file. The IRQ must be selected from the set {5,7,9,10}.
The configuration file must use 1 flags specification to enable the Jazz16 support. This is to avoid potential conflicts with other devices
when probing the Jazz 16 because it requires use of extra I/O ports not in the base port range.
With a SoundBlaster 16 card the device is full duplex, but it can only sensibly handle a precision of 8 bits. It does so by extending the
output 8 bit samples to 16 bits and using the 8 bit DMA channel for input and the 16 bit channel for output.
The joystick interface (if enabled by a jumper) is handled by the joy(4) driver, and the optional SCSI CD-ROM interface is handled by the
aic(4) driver.
SoundBlaster 16 cards have MPU401 emulation and can use the mpu attachment, older cards have a different way to generate MIDI and has a midi
device attached directly to the sb.
SEE ALSO
aic(4), audio(4), isa(4), isapnp(4), joy(4), midi(4), mpu(4), opl(4), pnpbios(4)
HISTORY
The sb device driver appeared in NetBSD 1.0.
BUGS
Non-SCSI CD-ROM interfaces are not supported.
The MIDI interface on the SB hardware is braindead, and the driver needs to busy wait while writing MIDI data. This will consume a lot of
system time.
BSD
June 22, 2005 BSD