Sponsored Content
Full Discussion: bad pci slot?
Top Forums UNIX for Dummies Questions & Answers bad pci slot? Post 65837 by jestra on Wednesday 9th of March 2005 12:22:24 PM
Old 03-09-2005
bad pci slot?

Hi,

im having a problem installing my pci wireless card. Im using knoppix, but my problem is with the mobo i think. im using an older laptop, toshiba satellite 2540 and when i plug in the card i get lights on sometimes. this means its getting power right. so then to install the card into the etc/pcmcia config file, i run cardctl info and i get there is nothing to report or unix similar. when i run knoopix with the card in my other newer laptop everything works fine and loads the correct driver and works right out of the box. so this tells me it must be a pci irq mobo problem or something.

also during hte boot, it tells me during the pci phase :yenti socket error and seems to reference irq. can anyone give me some pointers as to how i can test this pci. i dont have windows only knoppix installed on the hardrive.
 

9 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

device - > slot

Hi all.. I have a Sun Ultra 450 with a lot of drives and scsi controllers installed and i have one bad internal disk.. How can "map" ex /dev/dsk/c3t2d0s0 to a slot in the internal cabinet? Any good ideas? I dont want to remove the wrong disk :) thanks in advance.. (3 Replies)
Discussion started by: s93366
3 Replies

2. UNIX for Advanced & Expert Users

d1000 or minipac with six disk slot

Hi All, Is there anyway two nodes can share D1000 or minipack with 6 disk slots. Right now I have minipacks and I am connecting to Sunblade 100 and Sunbladew 150 separately. I would like to connect two systems to one minipack and able see the all the disks on both systems. I do have D1000... (0 Replies)
Discussion started by: sriny
0 Replies

3. Solaris

PCI slot info on V480/V490

Hi, How can I know slot wise info on a sun v480 box. I want to have the details like which slot has which card (slot 1- HBA, slot 2 - quad NIC) .. I know that sysdef, prtconf or prtdiag outputs will help to get this. But I dont know how to conclude from those outputs. Can anybody help me to... (4 Replies)
Discussion started by: vasu2020
4 Replies

4. Solaris

How to change boot slot X4100?

Hi everyone, I have a problem which looks like very simple. My SunFire X4100 have 2 disk slots: HDD0, HDD1 and 1 hard disk. I installed OS on the hard disk at HDD0 and now i want to boot it at HDD1. When i change BIOS and begin boot at HDD1 it reset after i chose Solaris 10 at OS selecting... (3 Replies)
Discussion started by: tien86
3 Replies

5. Solaris

AGP slot in my server ?

hi all, i have a sunfire v440 server , someone can tell me if this server contains a AGP slots ? thanx (4 Replies)
Discussion started by: lid-j-one
4 Replies

6. Filesystems, Disks and Memory

cantidad de slot de memoria

Alguien me puede ayudar, necesito saber cuantos slot de memoria disponibles tiene un RS/6000 AIX (1 Reply)
Discussion started by: ivan.estay
1 Replies

7. Solaris

Q:x4270_m2 reconfigure PCI card to slot 5?

Hello all, I have a problem with my x4270_m2 server. I have a GBE lan built into the back of my server and I have a QGE pci card in slot 2 to be used as a redundant. My server is not picking up the QGE lan card in slot2. From investigation of the /etc/path_to_inst, which shows: #grep e1000... (2 Replies)
Discussion started by: kerrygold
2 Replies

8. Programming

How to register ISR for PCI slot???

how to register callback function in unix?? (0 Replies)
Discussion started by: powyama
0 Replies

9. UNIX for Advanced & Expert Users

how to register ISR for PCI slot???

:wall::wall::wall:how to register ISR for PCI slot using callback registery (in c programing) i am using fedora 10 os.:wall::wall::wall::wall::wall: (0 Replies)
Discussion started by: powyama
0 Replies
DUMMY_CS(4)						     Kernel Interfaces Manual						       DUMMY_CS(4)

NAME
dummy_cs - PCMCIA dummy device driver SYNOPSIS
insmod dummy_cs.o [pc_debug=n] [free_ports=n] [irq_list=i,j,...] DESCRIPTION
The dummy_cs module has two purposes. It is intended as a demonstration of how to write the PCMCIA interface code for a client driver, and the source code is heavily commented. It is also written to function as a sort of generic ``point enabler'': when bound to any PCMCIA IO card, it will read the card's Configuration Information Structure, and configure the card appropriately. The configuration includes set- ting up IO and memory windows, configuring the card for interrupts, and initializing the card's PCMCIA configuration registers. It turns out that many cards report incomplete or inaccurate configuration information, due to vendor carelessness and the complexity of the data format. A vendor driver can generally take for granted many configuration details, so there is not much incentive for vendors to ensure that the on-card information is complete. Thus, the dummy_cs module is limited by its generality: since it makes no assumptions about card types, it is forced to rely on the card information, for better or worse. PARAMETERS
pc_debug=n Selects the PCMCIA debugging level. This parameter is only available if the module is compiled with debugging enabled. A non-zero value enables debugging. free_ports=n A flag indicating if the IO ports allocated for the card should be freed from the kernel resource maps. This is useful if the dummy driver is being used to configure a card in preparation for loading a specific PCMCIA-unaware driver. The default is 0 (false). irq_list=i,j,... Specifies the set of interrupts that may be allocated by this driver. AUTHOR
David Hinds - dahinds@users.sourceforge.net SEE ALSO
cardmgr(8), pcmcia(5). pcmcia-cs 2000/06/12 21:24:47 DUMMY_CS(4)
All times are GMT -4. The time now is 06:23 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy