Sponsored Content
Top Forums UNIX for Advanced & Expert Users scsi sda device not mounting !! Post 58132 by moxxx68 on Sunday 14th of November 2004 04:46:54 PM
Old 11-14-2004
CPU & Memory

i did what you said and this is what I got:
mount /dev/sda1 /mnt
mount: /dev/sda1 is not a valid block device
also when I ls -l /dev/sda*
i don't see anything particular.. everything looks like it should with or without the disk in...
i agree with you i think we can safely agree that the device is corrupt or busted.. I'm not going to waste any more of your time or mine on a disk that I can replace considering I thankfully had a .bakup of my work somewhere else before i did the reinstallation on my system.
thanks for your time and to Finalfantasy for giving some effective advice
atleast I learned a few things.
thanx moxxx68...
 

10 More Discussions You Might Find Interesting

1. Solaris

mounting an external scsi tape drive

hi- I just installed a quad gigaswift ethernet scsi card to my sunblade 150. I checked with the docs, and got all of the required drivers on the box. Now, I'm trying to mount an external scsi tape drive with no luck. I set the scsi address on the external drive to 0. Here's what I'm coming... (9 Replies)
Discussion started by: ECBROWN
9 Replies

2. UNIX for Dummies Questions & Answers

Mounting a flash device

How do you mount a USB flash drive on Sun Blade 2000 or 2500 with solaris 8? Thanks in advance ;) (1 Reply)
Discussion started by: xeroxtechnician
1 Replies

3. UNIX for Advanced & Expert Users

NOTICE: Stp: SCSI tape 0 device 46/0 offline

:( If anyone has solved this problem, please help me! Thanks in advance! (0 Replies)
Discussion started by: FCollet
0 Replies

4. UNIX for Advanced & Expert Users

NOTICE: Stp: SCSI tape 0 device 46/0 not ready

If somebody solve this error please help! Thanks in advance! (5 Replies)
Discussion started by: FCollet
5 Replies

5. UNIX for Dummies Questions & Answers

Notice Stp:SCSI tape 0 device 46/0 offline

My computer which uses scoUNIX, has an internal scsi tape backup. It will no longer backup . It posts this message Notice :Stp tape 0 device 46/0 offline. This has been discussed before by the forum and I'd appreciate any help that any expert could provide for me for a step wise approach to... (0 Replies)
Discussion started by: timothymhubbard
0 Replies

6. UNIX for Advanced & Expert Users

Notice: STP:SCSI tape 0 device 46/0 offline

My tape drive is not backing up my data. This is the message that comes up as the computer starts up each morning. Notice Stp:SCSI tape 0 device 46/0 offline. The computer is equipped with a Seagate STD 24000N internal tape drive and the green indicator light on it continuously is on but the amber... (0 Replies)
Discussion started by: timothymhubbard
0 Replies

7. Linux

mounting usb device

Hi Folks, I want to know how to mount usb device (cd,dvd etc) in linux, Regards, Manoj (4 Replies)
Discussion started by: manoj.solaris
4 Replies

8. UNIX and Linux Applications

Mounting a USB device with a predetermined name

When I attach a USB storage device to my Solaris server, the mount point is coming up as /rmdisk/unnamed_rmdisk Is there anyway I can have this device come up as a mounted device with a predetermined mount name eg /morespace rather than unnamed_rmdisk ? (0 Replies)
Discussion started by: jimthompson
0 Replies

9. Ubuntu

device size mismatch after mounting

Hi, I have a created a logical partition sda5 in ubuntu server 9.0.4. which is Disk /dev/sda: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00053d78 Device Boot Start End ... (1 Reply)
Discussion started by: rac_oradba
1 Replies

10. Solaris

Legacy Ultra60 with Solaris 5.7 SCSI device reverse engineering

I'm looking for help with a legacy system. I have some obsolete equipment connected to an Ultra 60 running Solaris 5.7 with the binary for a 32 bit driver. The driver is rejected by newer versions of solaris, which run 64 bit kernels. I hope to reverse engineer the driver so that I can... (0 Replies)
Discussion started by: obsoleteStuff
0 Replies
mount_pcfs(1M)						  System Administration Commands					    mount_pcfs(1M)

NAME
mount_pcfs - mount pcfs file systems SYNOPSIS
mount -F pcfs [generic_options] [-o FSType-specific_options] special | mount_point mount -F pcfs [generic_options] [-o FSType-specific_options] special mount_point DESCRIPTION
mount attaches an MS-DOS file system (pcfs) to the file system hierarchy at the mount_point, which is the pathname of a directory. If mount_point has any contents prior to the mount operation, these are hidden until the file system is unmounted. If mount is invoked with special or mount_point as the only arguments, mount will search /etc/vfstab to fill in the missing arguments, including the FSType-specific_options; see mount(1M) for more details. The special argument can be one of two special device file types: o A floppy disk, such as /dev/diskette0 or /dev/diskette1. o A DOS logical drive on a hard disk expressed as device-name:logical-drive , where device-name specifies the special block device-file for the whole disk and logical-drive is either a drive letter (c through z) or a drive number (1 through 24). Examples are /dev/dsk/c0t0d0p0:c and /dev/dsk/c0t0d0p0:1. The special device file type must have a formatted MS-DOS file system with either a 12-bit, 16-bit, or 32-bit File Allocation Table. OPTIONS
generic_options See mount(1M) for the list of supported options. -o Specify pcfs file system specific options. The following options are supported: foldcase|nofoldcase Force uppercase characters in filenames to lowercase when reading them from the filesystem. This is for compatibility with the pre- vious behavior of pcfs. The default is nofoldcase. FILES
/etc/mnttab table of mounted file systems /etc/vfstab list of default parameters for each file system ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWesu | +-----------------------------+-----------------------------+ SEE ALSO
mount(1M), mountall(1M), mount(2), mnttab(4), vfstab(4), attributes(5), pcfs(7FS) NOTES
If the directory on which a file system is to be mounted is a symbolic link, the file system is mounted on the directory to which the sym- bolic link refers, rather than on top of the symbolic link itself. SunOS 5.10 24 Nov 2003 mount_pcfs(1M)
All times are GMT -4. The time now is 11:24 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy