copy tape to tape using dd Post: 49947

10 More Discussions You Might Find Interesting

1. Shell Programming and Scripting

copy to tape notworking

I am copying a file to tape but it keeps failing, can any body help? I tried the tar,cp, mv commands and not seems to be working #!/bin/ksh # # Return Codes # 0 - success # 1 - failure # # # dat=`date +%y%m%d` cp /u07/work/theo_test.log /dev/rmt0/exp_dump.${dat}.$$ if (( ${?}...

2. Shell Programming and Scripting

another copy to tape question

I have a file called feed_file. Every week, I would like to copy this file to tape. I would not like the file on this tape to be over written with the previous weeks file. So what I would prefer to do is to add time stamp at the end of each weeks file on the tape in order for the files to look...

3. Solaris

Copy tape ?????????????

how i can copy entire content of a tape to HD ? the tape content a tar file i want to copy it onto hard disk and after do the untar ... The block size of the tar file is 1024 ..... wich command i must type ??? thank in advance ........ The operating system is sun ....

4. UNIX for Advanced & Expert Users

Space free on tape /delete a single file on tape

Hi, I' using a sun solaris server, I would like to known if there is the possibility to control how many space is free on a tape and how I can delete a single file on a tape. Thanks DOMENICO

5. Solaris

Copy Tape Drive DDS-01.

Hello, I am trying to copy a boot tape DDS-01 with miniroot, but i don�t get this copy. i have already used the command dd, but don�t work. There are other way to get it.

6. UNIX for Dummies Questions & Answers

Mounting DLT tape and to backup file to tape

Hi there: I'm new here Can anyone help me: I have DS15 Alpha server : Unix 5.1B Now i need to connect a DLVT VS80 1U Rackmount Tape Drive unit. What is the exact comman to mount the DLTape IV?? How do i make backuo @ copy file to the tape? Thanx to all

7. AIX

How to copy a tape into another tape ?

I am new to AIX. I want to make a duplicate tape. How can I do that ?

8. SCO

Tape Status shows 2 Hard errors and 5 Underruns on new tape

when I do a tape status /dev/rStp0 I get the following on a new tape and I have tried several: Status : ready beginning-of-tape soft errors : 0 hard errors: 2 underruns: 5 My BackupEdge has stopped backing up my system because it asks for a new volume yet my total system data is under 20...

9. AIX

How to make a copy of a tape to another tape?

Hello, We need to make a copy of a backup tape, using the 2 tape recorders in IBM 3582 Tape Library We tried tu use "tcopy", it seems to work fine (no error messages) but we aren't sure if we can rely on it. my question is how to check if the copy succeded or not, but i also want to know...

10. AIX

Ejecting tape on AIX & Some Tape commands

I am trying to use this command to eject the tape mt -f /dev/rmt/0 unload but it gives me error mt -f /dev/rmt/0 unload mt: 0511-575 unload is not a recognized subcommand. Usage: mt Subcommand Valid subcommands are: weof eof fsf bsf ...

LEARN ABOUT REDHAT

tapeinfo

TAPEINFO(1)						      General Commands Manual						       TAPEINFO(1)

NAME

       tapeinfo - report SCSI tape device info

SYNOPSIS

       tapeinfo -f <scsi-generic-device>

DESCRIPTION

       The  tapeinfo  command  reads  various information from SCSI tape drives that is not generally available via most vendors' tape drivers. It
       issues raw commands directly to the tape drive, using either the  operating  system's  SCSI  generic  device  (	e.g.  /dev/sg0	on  Linux,
       /dev/pass0 on FreeBSD) or the raw SCSI I/O ioctl on a tape device on some operating systems.

       One  good  time	to  use 'tapeinfo' is immediately after a tape i/o operation has failed. On tape drives that support HP's 'tapealert' API,
       'tapeinfo' will report a more exact description of what went wrong.

       Do be aware that 'tapeinfo' is not a substitute for your operating system's own 'mt' or similar tape driver control program. It is intended
       to supplement, not replace, programs like 'mt' that access your operating system's tape driver in order to report or set information.

OPTIONS

       The first argument, given following -f , is the SCSI generic device corresponding to your tape drive.  Consult your operating system's doc-
       umentation for more information (for example, under Linux these are generally start at /dev/sg0 under FreeBSD these start at /dev/pass0).

       Under FreeBSD, 'camcontrol devlist' will tell you what SCSI devices you have, along with which 'pass' device controls  them.  Under  Linux,
       "cat /proc/scsi/scsi" will tell you what SCSI devices you have.

BUGS AND LIMITATIONS

       This program has only been tested on Linux with a limited number of tape drives (HP DDS4, Seagate AIT).

AVAILABILITY

       tapeinfo  is  currently being maintained by Eric Lee Green <eric@badtux.org> formerly of Enhanced Software Technologies Inc. The 'mtx' home
       page is http://mtx.sourceforge.net and the actual code is currently available there and via CVS from http://sourceforge.net/projects/mtx/ .

SEE ALSO

       mt(1),mtx(1),scsitape(1)

								    TAPEINFO1.0 						       TAPEINFO(1)