Sun Ultra 10 hardware compatibility Post: 48571

9 More Discussions You Might Find Interesting

1. UNIX Desktop Questions & Answers

Using a Sun Ultra 5 at work

I wouldn't call myself exactly new to Unix. I've played with Linux before so I can get around alright. I just have never really learned the basics, like setting a user's path. How do I do that on my Sun station? Obvioulsly, I've got several different bins, but I can only use the commands in...

2. Solaris

sun ultra or sun sparkstation

am wonder wich sun computer is better, a sun ultra or sun sparkstation, and what is the difference

3. Solaris

sun ultra

Hi Guys, I have a 2nd hand Sun ultra-5, I wanted to know how to be able to run it as a normal window. I do not have any experience whatsoever with solaris/unix. Does anyone can give me a clue where to start. When I switch it goes to: unix console login: pa$$word: #UNIX sendmail : enable to...

4. Solaris

Sun Blade 100 Disk Compatibility

It's me again, I was taking my Sun Blade 100 apart last night to see what kind of drive I have. It is a Seagate ST320011A Barracuda ATA IV 20 GB 7200 RPM Ultra ATA/100 IDE. Now 20 gig ain't all that big anymore and I got to thinking about putting a couple bigger drives in there. although I...

5. Solaris

sun ultra 10 monitor

hi all, it seem hard to see on a regular monitor the ultra 10 converter to rgb so that it can go to a pc monitor. do u know how can i fix the monitor properly? it's not easy to see on the monitor there's so many lines. thanks in advance.

6. Solaris

Sun Fire v120 memory compatibility

Hi, I recently acquired an old Sun Fire v120 from work. I plan to play around with this at home whilst I'm studying for my SCSA exams. Only problem is it currently has no memory installed. I believe the memory modules required are 168 pin PC133 DIMMs. Unfortunately, the original Sun modules are...

7. Hardware

Linux Hardware Compatibility Guide (2007 HOWTO)

Before posting questions about Linux hardware, it is a good idea to check the Linux Hardware HOWTO guide (Last Update: 2007-05-22) However, this HOWTO has not been maintained since 2007 and it out-of-date.

8. Hardware

Hardware compatibility advice wanted.

If anyone here is successfully running Linux Mint and PC-BSD on two dedicated hard disk drives, (no emulator or partitioning stuff), using Phenom II or Athlon II CPU, I'd like to ask your help to pick hardware!

9. Solaris

Check Hardware compatibility via LIVE CD

Hi Can i use Solaris LIVE CD to verify that ubuntu has all drivers present for a certain desktop PC? which Live CD should i use ? there any many varities out there Before i purchase this expensive PC i want to ensure Solairs has all drivers for it. Specs are : Processor Intel Core i7...

LEARN ABOUT NETBSD

stpcide

STPCIDE(4)						   BSD Kernel Interfaces Manual 						STPCIDE(4)

NAME

     stpcide -- STMicroelectronics STPC IDE disk controllers driver

SYNOPSIS

     stpcide* at pci? dev ? function ? flags 0x0000

DESCRIPTION

     The stpcide driver supports the STMicroelectronics STPC x86 SoC internal IDE controllers, and provides the interface with the hardware for
     the ata(4) driver.  The driver features DMA mode 2 and PIO mode 4 transfer speeds.

     The 0x0002 flag forces the stpcide driver to disable DMA on chipsets for which DMA would normally be enabled.  This can be used as a debug-
     ging aid, or to work around problems where the IDE controller is wired up to the system incorrectly.

SEE ALSO

     ata(4), atapi(4), intro(4), pci(4), pciide(4), wd(4), wdc(4)

BUGS

     The timings used for the DMA and PIO modes are for STPC Atlas and its siblings with their PCI clock configured at 33 MHz.	Other speeds
     including the STPC Vega Ultra-IDE controller will need adjustments.

BSD
								 October 31, 2003							       BSD