Sponsored Content
Full Discussion: Boot times
Top Forums UNIX for Advanced & Expert Users Boot times Post 48446 by RTM on Monday 8th of March 2004 09:19:41 AM
Old 03-08-2004
I've never heard of Themis before so I don't know if some of these will help.

Insure your diag-switch?=false and diag-level=min (min or off) in eeprom/OBP - having the switch set to true will increase your boot time.

If you are running NIS, make this system a slave so it binds to itself instead of trying to find a slave /master on the network.

If you are running DNS, set this server up as either a cache-only or slave - this will save time if starting other services.

Try to get rid of anything you don't use - may be a trial and error period - look at the startup scripts - each one may be looking for something to be there before running - if it isn't there (like a config file) then it probably isn't being used and you can move it from a Sxxscript to sxxscript - don't just delete it as you may find you DID need it. Moving it to a lowercase s will cause it not to start. Another thing to look at is shutdown - the K scripts will slow down your reboot if they are doing the same type of thing as startup - looking for a config file that did not exist - this may not save you 2 seconds but half a second - find the one's you don't need and you improve total reboot time.
 

9 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

Cannot boot - Boot : Panic : File size out of range (EWS-UX/V unix)

Hey ! I am running EWS-UX/V (Rel 4.2) on NEC EWS/4800/330 station and I am having problems rebooting my station : I am getting the following message on display : BOOT : PANIC : File size out of range. According to user guide, this error is occuring when a file exceeding the limit and/or... (2 Replies)
Discussion started by: fredo
2 Replies

2. Solaris

solaris boot problem boot error loading interpreter(misc/krtld)

When I installed the SOLARIS 10 OS first time, the desktop would not start up, this was because of network setup. Reinstalled worked. After a week due to some problem I had to reinstall OS, installation went fine and but when i reboot I get this error. cannot find mis/krtld boot error loading... (0 Replies)
Discussion started by: johncy_j
0 Replies

3. Solaris

cannot find boot device and won't boot off cdrom

I'm running solaris 2.5.1. My main development server is DEAD, i can't even boot off the cdrom, it powers up, acts like it is starting the boot process but then says cannot find boot device. I've done the search here on this site and saw the other posts, but at the ok prompt it won't even let me... (3 Replies)
Discussion started by: kymberm
3 Replies

4. AIX

how would you know your server was rebooted 3 times or 5 times

Is there such location or command to know how many times did you reboot your server in that particular day?in AIX. (3 Replies)
Discussion started by: kenshinhimura
3 Replies

5. SCO

stage 1 boot failure: error loading hd (40)/boot

hi SCO Unix 5.0.6 doesn't boot due to this problem: not a directory boot not found cannot open stage 1 boot failure: error loading hd (40)/boot Knows someone howto solve it? (16 Replies)
Discussion started by: ccc
16 Replies

6. Boot Loaders

Reboot and Select Proper Boot device or insert Boot media in select Boot device and press a key

Hello, I have kubuntu on my laptop and now I decided to switch to Windows 7. I made the bios settings properly (first choice is boot from cd\vd) but I see the error " reboot and select proper Boot device or insert Boot media in select Boot device and press a key " I have tried CD and... (0 Replies)
Discussion started by: rpf
0 Replies

7. Solaris

Solaris x86 installation using jumpstart does not local boot ( boot from hdd)

I am trying to install Solaris x86 using the Jumpstart server. I run the add_install_client command with appropriate options, and reboot my x86 Target box. The installation starts fine and unattended. After the installation completes and the target goes for a re-boot, it does not boot from the HDD... (9 Replies)
Discussion started by: hemalsid
9 Replies

8. Programming

Problem with implementing the times() function in C (struct tms times return zero/negative values)

Hello, i'm trying to implement the times() function and i'm programming in C. I'm using the "struct tms" structure which consists of the fields: The tms_utime structure member is the CPU time charged for the execution of user instructions of the calling process. The tms_stime structure... (1 Reply)
Discussion started by: g_p
1 Replies

9. Solaris

How to specify local boot up disk in CD boot Grub?

Hi Solaris 10 Experts, I am wondering what is the correct syntax to edit in Grub when trying to specify the local ZFS boot disk while booting up from a Solaris 10 x86 64bits DVD installation disk. In other word, I try to boot up from local disk without removing the Solaris installation disk... (0 Replies)
Discussion started by: gjackson123
0 Replies
installboot(1M) 														   installboot(1M)

NAME
installboot - install bootblocks in a disk partition SYNOPSIS
installboot bootblk raw-disk-device The boot(1M) program, ufsboot, is loaded from disk by the bootblock program which resides in the boot area of a disk partition. The ufs boot objects are platform-dependent, and reside in the /usr/platform/platform-name/lib/fs/ufs directory. The platform name can be found using the -i option of uname(1). The installboot utility is a SPARC only program. It is not supported on the architecture. users should use installgrub(1M) instead. bootblk The name of the bootblock code. raw-disk-device The name of the disk device onto which the bootblock code is to be installed; it must be a character device which is read- able and writable. Naming conventions for a SCSI or IPI drive are c?t?d?s? and c?d?s? for an IDE drive. Example 1: Installing UFS Boot Block To install a ufs boot block on slice 0 of target 0 on controller 1 of the platform where the command is being run, use: example# installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk /dev/rdsk/c1t0d0s0 /usr/platform/platform-name/lib/fs/ufs directory where ufs boot objects reside. /platform/platform-name/ufsboot second level program to boot from a disk or CD See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWcsu | +-----------------------------+-----------------------------+ od(1), uname(1), boot(1M), init(1M), kadb(1M), kernel(1M), monitor(1M), reboot(1M), rpc.bootparamd(1M), init.d(4), attributes(5) WARNINGS
The installboot utility fails if the bootblk or openfirmware files do not exist or if the raw disk device is not a character device. 11 Apr 2005 installboot(1M)
All times are GMT -4. The time now is 04:40 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy