SUN is hung/dead Post: 44969

10 More Discussions You Might Find Interesting

1. IP Networking

system hung

I installed sco unix v 5.0.5 in the hp server lc 2000 HD size 27gb & ram 256 , used micro focus cobol for unix , aplication system bank , the problem is the system hung 2 or 3 times a day will you pls. give me the solution. thanks talib alsaadi :(

2. UNIX for Dummies Questions & Answers

SCSI bus is hung

Anyone have any ideas what could be causing me to get the error "The SCSI bus is hung. Perhaps an external device is turned off"? This is occuring when I try to boot off of my external CDROM. I have tried this CDROM on 3 different systems, tried different SCSI cables, and different terminators...

3. Solaris

Dead SUN

My SUN V210 refuses to fully boot up. We had a power outage (ie. someone tripped the cord) and thereafter the Sun will not come up, and the OS is not starting. The LED on the front is not lit. Monitor gets no feed, so I plugged in via the management port. The system comes up to: Trap 3e. and...

4. HP-UX

Server hung

So my server was hung when I came in this morning. It was responding to pings, but the console and telnet sessions would not respond. There was no disk activity. The display said FA1F which I discovered that the "A" represents a high CPU load. I tired several things to get it going but was forced...

5. HP-UX

Hung Port

Here's a difficult one for you. I am on HPUX 11.0. I have a hung port, it is stuck in FIN_WAIT_2. Short of rebooting, how can I terminate the connection the system thinks still exists? I found a script online that uses adb but have not been able to get it to work. I am still open to using...

6. Shell Programming and Scripting

Monitoring for a hung process

A coworker has a shell script that runs from a scheduler at the 3am. The shell script runs sqlplus passing in a sql statement, which generate a file. This is done 21 times for 21 different sql statements. Recently, one of the sqlplus processes got hung. Is there a way to monitor how long the...

7. Programming

Subroutine Hung

Hi friends I am Administrator for a system works with uinx OS but, many times I get messages from server console inform me about Subroutine is Hanging so what can I do to reset this Subroutine? Note: always when I got that I restart the server but I think that is not professional solution.

8. HP-UX

ssh session getting hung (smilar to hpux telnet session is getting hung after about 15 minutes)

Our network administrators implemented some sort of check to kill idle sessions and now burden is on us to run some sort of keep alive. Client based keep alive doesn't do a very good job. I have same issue with ssh. Does solution 2 provided above apply for ssh sessions also?

9. Solaris

Hung ILOM - e2900

While trying to perform a firmware upgrade on this ilom, the system refused to allow uploading of more than ~900k or so... We tried multiple approaches using FTP and all failed. I decided to start this morning by firing up Apache on another box and trying the same process via HTTP but when I went...

10. Shell Programming and Scripting

How to check if the process is Hung?

I wish to monitor if my Tomcat process if Running, Hung, or Shutdown. I cannot use any third party monitoring tools so i decided to use one of these to test if the tomcat server is responding or not . 1. nslookup 2. telnet 3. ps The reason I do not use wget / curl is because it will...

LEARN ABOUT OPENSOLARIS

panel_below

panel_above(3CURSES)					     Curses Library Functions					      panel_above(3CURSES)

NAME

       panel_above, panel_below - panels deck traversal primitives

SYNOPSIS

       cc [ flag ... ] file ... -lpanel  -lcurses  [ library .. ]
       #include <panel.h>

       PANEL *panel_above(PANEL *panel);

       PANEL *panel_below(PANEL *panel);

DESCRIPTION

       panel_above()  returns  a  pointer to the panel just above panel, or NULL if panel is the top panel. panel_below() returns a pointer to the
       panel just below panel, or NULL if panel is the bottom panel.

       If NULL is passed for panel, panel_above() returns a pointer to the bottom panel in the deck, and panel_below() returns a  pointer  to  the
       top panel in the deck.

RETURN VALUES

       NULL is returned if an error occurs.

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |MT-Level		     |Unsafe			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       curses(3CURSES), panels(3CURSES), attributes(5)

NOTES

       These routines allow traversal of the deck of currently visible panels.

       The header <panel.h> automatically includes the header <curses.h>.

SunOS 5.11							    31 Dec 1996 					      panel_above(3CURSES)

10 More Discussions You Might Find Interesting

1. IP Networking

system hung

Discussion started by: talib alsaadi

2. UNIX for Dummies Questions & Answers

SCSI bus is hung

Discussion started by: saucierm

3. Solaris

Dead SUN

Discussion started by: ireeneek

4. HP-UX

Server hung

Discussion started by: biznatch