NIC cards for sunblade 100 Post: 40742

10 More Discussions You Might Find Interesting

1. IP Networking

Setup 2 NIC cards in one UNIX system

Hi; I have a UNIX box (SCO 5.0.2) with two (2) NIC cards. One card (NIC1) talks to a network 57.14.65.x/27. The other card NIC2) talks to users on 57.14.103.x and 57.14.105.x with subnet mask of 255.255.0.0. If I set NIC2 to this subnet mask (255.255.0.0) it seems like the NIC traffic is now...

2. High Performance Computing

veritas and nic cards

Hello I have 2 machines with 3 NIC cards. When I setup veritas, I receive this message: e1000g1 has an IP address configured on it. It could be a public NIC on ken. Are you sure you want to use e1000g1 for the first private heartbeat link? As if e1000g1 should not have an IP address....

3. HP-UX

routing issues with multiple NIC cards

I am running HP_UX 11.23 with 4 NIC cards (this is our TSM server) I have 4 subnets we are backing across. trying to keep traffic on their subnets. I only have one route statment should I add more. route add net 123.99.8.0 netmask 255.255.255.0 123.99.8.254 route add net 123.99.67.0 netmask...

4. Red Hat

External NIC cards not pinging with each other in RHEL 5.1

We have a setup of two nodes which has two NIC cards in each. One is built in and another is D-Link (external NIC card). We are unable to ping to the external NIC cards in both. Eg: Node A has two IPs 192.168.1.10 (eth0) and 192.168.2.10 (eth1) and Node B has two IPs 192.168.1.20 (eth0) and...

5. Solaris

PC133 for sunblade 100

Greetings, I was in the mood of upgrading my sunblade100 in my bedroom, since I recuperated some RAM from intel servers, and found myself with what seems to not work (I was hoping to pass from 256Mb to 2GB... and then upgrading to solaris 10...) after this failure I tried with just one 512 MB,...

6. HP-UX

HP UX 9000 NIC CARDS

Hello, I am trying to move an HP UX from one locaion to another. The new location don't have any Fiber switches. On the back of my server I see 2 RJ 45 for console management the other for networking , the server also has a fiber NIC card. When I disconnec the fiber and want to user regular...

7. IP Networking

Best reference for understanding low level info on nic cards drivers and functionality

Hi, What is the best reference that gives in detail on nic cards configuration , assigning multiple ip addresses to a single interface, netlink library etc and all basic stuff at this level..? Thanks

8. Hardware

Nic Card for SunBlade 1500 Tower

Hi, I bought a server Sunblade 1500, and I would like to install a nic card. Anyone know any compatible network card for this server? Regards

9. Ubuntu

Help asap squid with 2 nic cards setup

I found an old post that talks about 2 nice cards and it is driven by the IP address .... but I didn't understand it because the 2 people skipped information for me the newbie.. Can someone help me... I have the proxy server setup and I believe I have enabled the 2nd nic card, I just need one...

10. Ubuntu

How do you setup 2 nic cards for squid Ubuntu server?

I have a made my squid proxy, I now have add another nic card to an old CPU using Ubuntu server 12.04. I have seen another post similar however I am new and did not understand some of it. Something about redirecting IP address and IP table? I don't know how to do this.:confused:

LEARN ABOUT NETBSD

cas

CAS(4)							   BSD Kernel Interfaces Manual 						    CAS(4)

NAME

     cas -- Cassini/Cassini+ (GigaSwift) Ethernet device driver

SYNOPSIS

     cas* at pci? dev ? function ?

     Configuration of PHYs may also be necessary.  See mii(4).

DESCRIPTION

     The cas driver provides support for the Sun Cassini and Cassini+ (GigaSwift) and the National Semiconductor Saturn Ethernet hardware found in
     Sun UltraSPARC machines and Sun GigaSwift PCI cards.

     Cards supported by this driver include:
	   o   Sun Gigaswift Ethernet (SX fibre variants)
	   o   Sun Gigaswift Ethernet (UTP variants)
	   o   Sun quad Gigaswift Ethernet

SEE ALSO

     brgphy(4), gentbi(4), gphyter(4), ifmedia(4), intro(4), mii(4), ifconfig(8)

     Sun Microsystems, Cassini+ ASIC Specification, http://www.sun.com/processors/manuals/cs_plus.pdf.

HISTORY

     The cas driver first appeared in OpenBSD 4.1.  NetBSD support was added in NetBSD 6.0.

AUTHORS

     The cas driver was written for OpenBSD by Mark Kettenis <kettenis@openbsd.org>, based on the gem(4) driver, and ported to NetBSD by Julian
     Coleman <jdc@NetBSD.org>.

BUGS

     The cas driver does not support any of the advanced features of the Cassini chip.

     On the SX fibre variants of the hardware, the link may stay down if media options apart from autoselect are chosen.

BSD
								  January 7, 2010							       BSD