#!/bin/bash
# LIP: Local IP, the address reserved for your Evaluation system
export IXP1200_LIP=10.3.19.129
# RIP: Remote IP, the address of a tftp server with zImage and ramdisk_img.gz
export IXP1200_RIP=10.3.19.128
# netmask, broadcast, gateway and DNS
export IXP1200_MASK=255.255.255.0
export IXP1200_BCAST=10.3.19.255
export IXP1200_GWAY=10.3.19.251
export IXP1200_DNS1=143.183.51.92
export IXP1200_DNS2=143.183.163.67
# This line assumes the start script is in the user's home directory
minicom ixp1200 -S ./start
hello. i'm attempting to use minicom in linux, but i'm having some difficulties. When i type in "minicom", the application opens up. It says 'starting minicom/finding modem'(something like that). However, once it actually starts, I can't do anything. No matter what I type in, it doesn't work. ... (2 Replies)
I am testing for serial comm..........
I got suggestion of minicom....
but when i fire minicom...
then i get the following error...
minicom
minicom: WARNING: configuration file not found, using defaults
Device /dev/modem access failed: No such file or directory.
I am using fedora 6 ,... (3 Replies)
Hi,
I am new to use minicom. I want script to run on minicom with username and password as automated.(Expect). please could anyone suggest the sample code for it.
Thanks in advance (2 Replies)
Hi,
I am new to using minicom. I want how to write a expect script for minicom login? I wrote a code but its not acting what iam expecting. here I have my code:
#!/usr/bin/expect
set fd
fconfigure $fd
spawn -open $fd
spawn minicom
expect “enter:”
send "\n"
send "\n"
... (3 Replies)
Hi all,
I have some trouble getting stty to talk to some serial/usb converter.
Getting minicom to work was however quite simple after I entered the following settings in addition to its standard-setup:
pu port /dev/ttyUSB0
pu baudrate 19200
pu bits 8
pu... (3 Replies)
This is what I've tried:
#!/bin/sh
send sh
send showifs
send exit
! killall minicom
My problem is that for some reason when I do this it doesn't give me the results of the prior commands sent like showifs
So I suspect my syntax is wrong. (1 Reply)
Hi all,
i must do a little script that send AT command at ttyUSB3..
for example:
Start Minicom:
Set serial port ttyUSB3
AT+CREG?
if response != OK then do something
...other AT command (open a socket tcp/ip with at comman)
Send a file .txt for example.
exit minicom.
I saw on the... (49 Replies)
I'm a fairly new user to Linux based systems and am still a little uncomfortable with using the command interface. I'm trying to get my feet wet but have unfortunately hit a wall and am actually not even sure what I am trying to accomplish is at all possible.
Basically, I am trying to use a... (0 Replies)
Hey All,
I am trying to find something similar to minicom, but it needs the ability to be ran during a remote dialup session on the remote
device's side.
If I dial into the remote server (*using minicom) and then try to run minicom on the remote server I get the following:
# minicom... (20 Replies)
Discussion started by: mrm5102
20 Replies
LEARN ABOUT SUNOS
conv_lp
conv_lp(1M) System Administration Commands conv_lp(1M)NAME
conv_lp - convert LP configuration
SYNOPSIS
conv_lp [-d dir] [-f file]
DESCRIPTION
conv_lp reads LP printer configuration information from a directory and converts it to an output file for use with print client software.
OPTIONS
The following options are supported:
-d dir The root (` / ') directory from which LP configuration information is read. The default is root (` / ').
-f file The output file to which conv_lp writes the converted LP configuration information. The default is /etc/printers.conf.
EXAMPLES
Example 1: Converting LP Configuration Information from the Default Directory and File
The following example converts LP configuration information from directory root (/) to file /etc/printers.conf.
% conv_lp
Example 2: Converting LP Configuration Information From a Specified Directory and File
The following example converts LP configuration information from directory /export/root/client to file /export/root/client/etc/print-
ers.conf.
% conv_lp -d /export/root/client -f /export/root/client/etc/printers.conf
EXIT STATUS
The following exit values are returned:
0 Successful completion.
non-zero An error occurred.
FILES
/etc/printers.conf System printer configuration database.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWpcu |
+-----------------------------+-----------------------------+
SEE ALSO lpset(1M), printers.conf(4), attributes(5)SunOS 5.10 9 Sep 1996 conv_lp(1M)