05-19-2003
hey google,
the redhat-box is the router. on one interface is the network which the adsl-modem is connected with a ppp0 and the official ip on it. the second interface has 10.0.0.2/255.255.255.0 for my internal network.
route shows the default route to a gw at my provider.
on the client, which is running mandrake, the default gw is 10.0.0.2 which is the interface on the router. the setting of the interface is 10.0.0.1 with netmask 255.255.255.0.
Communication within my network and from/to the provider is working perfectly. The only problem is the name-resolution for files.
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
Hi
I usually use solaris but Im working right now with a Linux box and I cannot find the nslookup command. Does Linux use this command or have an other one to do dns querys??
Thanks and sorry for such a dumb question.. :) (2 Replies)
Discussion started by: piltrafa
2 Replies
2. UNIX for Advanced & Expert Users
Hi one of our Linux machine from our Data Farm have constantly hang and instable. I found out from the console the below error. Does anyone encounter this problem or see this error before with a glimpse on what it could be.. ?
---------------------------------------------------------------
... (1 Reply)
Discussion started by: killerserv
1 Replies
3. UNIX for Advanced & Expert Users
I have set up a samba share on my Linux server. I have a gigabit switch, gigabit NICs in each machine.
I have set up the /etc/samba/smb.conf to support no delay, 8192 send/receive buffers, etc. This helped the rate for Samba go from about 4MB/S to about 10MB/S, but I expect to see about... (1 Reply)
Discussion started by: perspectx
1 Replies
4. Shell Programming and Scripting
Hi,
I'm looking for someone who can think in sed. Basically, I need the trailing characters on every line in a file to be deleted. These characters are all in capitals, and always follow a number, but they often vary in number
For instance, on the line:
2006_10_9_p20_TALK
I'd want to... (4 Replies)
Discussion started by: Laurel Maury
4 Replies
5. Programming
Hi All,
I am writing some data's into a file from C++ program. The files which i am writing is of fixed length . say 232 in length per line.
I am writing as . my c code is as
... (0 Replies)
Discussion started by: arunkumar_mca
0 Replies
6. UNIX for Dummies Questions & Answers
Hi
I had deleted important files from my company server :(
the server is HPUX
and i don't know how to undo rm command or how to restore the files ..
iam appreciate for any help
Thanx ... (5 Replies)
Discussion started by: Eisa
5 Replies
7. UNIX for Dummies Questions & Answers
cat a
.a
ba
.b
bb
.c
bc
sort a
.a
.b
ba
bb
bc
.c
NOTE: .a and .b appears before ba and bb, where as .c appears after bc.
In general (3 Replies)
Discussion started by: ajb
3 Replies
8. Shell Programming and Scripting
I have a strange situation of sorting and merging two files based on similar columns
previusly both files has same count of records so, I made below way which is working fine until they reduced the count of one files .
I.e. some times the count of records of both will same and some times it... (16 Replies)
Discussion started by: manas_ranjan
16 Replies
9. Shell Programming and Scripting
Hi,
I keep getting this error when i run my script:
No matter how many times i run this rm -rf /siebel/sfs/tmp/dump it succeeds when i expect it only the first time to succeed becoz i expect the second to fail as the directory should be gone in the first run.
i had earlier mentioned... (5 Replies)
Discussion started by: mohtashims
5 Replies
10. Shell Programming and Scripting
Starting sendmail throws this error:
I decided to see the permission on the files under /etc/mail and this is the output:
# ls -ltr
total 284
-rwxr-xr-x. 1 root root 1847 Jan 27 2014 virtusertable
-rwxr-xr-x. 1 root root 127 Jan 27 2014 trusted-users
-rwxr-xr-x. 1 root root 92... (3 Replies)
Discussion started by: mohtashims
3 Replies
LEARN ABOUT DEBIAN
vlan-interfaces
VLAN-INTERFACES(5) File formats VLAN-INTERFACES(5)
NAME
/etc/network/interfaces (vlan) - vlan extensions for the interfaces(5) file format
DESCRIPTION
/etc/network/interfaces contains network interface configuration information for the ifup(8) and ifdown(8) commands. This manpage
describes the vlan extensions to the standard interfaces(5) file format.
Primary extensions exist to make and destroy vlan interfaces, secondary extensions exist for ipv4 interface manipulation which are gener-
ally needed when using (a lot of) vlans.
VLAN CREATION
Vlan interface definitions exist of the vlan interface name, and an optional 'raw-device' parameter. Vlan interfaces are numbered 1 to
4095. You have the option to have interface names zero-padded to 4 numbers, or just the plain digits without leading zero. The following
example shows four ways to create a vlan with id 1 on interface eth0. They all result in different names.
iface eth0.1 inet static
address 192.168.1.1
netmask 255.255.255.0
iface vlan1 inet static
vlan-raw-device eth0
address 192.168.1.1
netmask 255.255.255.0
iface eth0.0001 inet static
address 192.168.1.1
netmask 255.255.255.0
iface vlan0001 inet static
vlan-raw-device eth0
address 192.168.1.1
netmask 255.255.255.0
# We don't have br support out of the box
iface br0.2 inet static
vlan-raw-device br0
address 192.168.1.1
netmask 255.255.255.0
# Aliases are ignored
iface br0.2:1 inet static
address 192.168.1.1
netmask 255.255.255.255
EXTRA IFACE OPTIONS
Usually someone who uses vlans also wants to do some other manipulations with the ip stack or interface.
vlan-raw-device devicename
Indicates the device to create the vlan on. This is ignored when the devicename is part of the vlan interface name.
ip-proxy-arp 0|1
Turn proxy-arp off or on for this specific interface. This also works on plain ethernet like devices.
ip-rp-filter 0|1|2
Set the return path filter for this specific interface. This also works on plain ethernet like devices.
hw-mac-address mac-address
This sets the mac address of the interface before bringing it up. This works on any device that allows setting the hardware address
with the ip command.
AUTHOR
This manpage was adapted from interfaces(5) by Ard van Breemen <ard@kwaak.net>
SEE ALSO
vconfig(8) interfaces(5)
vlan September 30 2007 VLAN-INTERFACES(5)