XP Pro: home network Post: 34904

9 More Discussions You Might Find Interesting

1. IP Networking

home network not working!

i just linked 2 100MHz Linux kernel 2.4.2 boxes togeather using a direct cable connection, on two 3Com PCI network cards, using the EtherLink III chipset. Unfortuanately, when I boot both PCs, i get a loading interface: eth0 for five minutes, then a failed flag. No networking suppt. in windows,...

2. UNIX for Dummies Questions & Answers

Home Network Storage Solution.

Hi All... I have never really touched any form of unix so any help would be appraciated. I am looking at creating/building another PC to add to my network for storage purposes only. Would unix be the best OS to use in this situation as all I have available to me is a very low end PC. As...

3. UNIX for Dummies Questions & Answers

why /home and /packages are network based?

Does anyone noe why /home n /packages r usually kept remotely..as in network base by administrators?is it because of security reasons??? thanks.

4. UNIX for Dummies Questions & Answers

Using Linux on/in a home network

I recently received an e-mail from "the faculty" at Unix-dot-Com and I was reminded of this notable resource for folks learning about Unix and its clone, Linux. I hadn't posted anything in two years and during that time, I have been working, in my spare time, on a home network combining two Linux...

5. UNIX for Dummies Questions & Answers

Need help to configure routing on home network

I have a Windows laptop and a Sparc desktop. I'm trying to toy around with routing. If have always on broadband from BT. My router ipaddress is: 192.168.1.1 This router uses DHCP. My Laptop Ip is as follows: Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . :...

6. Linux

Need help w/home network

Hello world! I'm writing to you from Chile, Southamerica, and need a little help with my tiny home netwk. Hope you can give me a hand because this thing is breaking my balls. This is what i have: 1 windows box with XP pro (server) 1 linux box with DSL (box) 1 wrt54gl router with dd-wrt...

7. IP Networking

ssh into home network

I am trying to ssh from my computer at work into my home PC. My work computer is running mac os x 10.6.3, home PC is running ubuntu. At home I have multiple PC's hooked up through a router and modem. I have gone into the router settings and set up port forwarding to forward ports 22 and 175 to...

8. IP Networking

Help building a home network needed.

I have one computer with internet connection and printers that I would like to connect to another computer to use as a practice/test Server. I would like the server to access the other computer by a direct connection of some sort because I don't see the point of aquiring the hardward (ethernet...

9. IP Networking

DHCP and DNS on a home network

Let's say I have a home network containing a server that acts as the resident gateway and serves dhcp and dns requests. Laptop A is frequently connected and disconnected from the network as it is used as a travel computer. Is there a secure way to make sure that whenever laptop A is connected to...

LEARN ABOUT OPENDARWIN

auscope

AUSCOPE(1)						      General Commands Manual							AUSCOPE(1)

NAME

       auscope - Network Audio System Protocol Filter

SYNOPSIS

       auscope [ option ] ...

DESCRIPTION

       auscope	is  an	audio  protocol  filter  that can be used to view the network packets being sent between an audio application and an audio
       server.

       auscope is written in Perl, so you must have Perl installed on your machine in order to run  auscope.   If  your  Perl  executable  is  not
       installed  as  /usr/local/bin/perl,  you should modify the first line of the auscope script to reflect the Perl executable's location.  Or,
       you can invoke auscope as

       perl auscope [ option ] ...

       assuming the Perl executable is in your path.

       To operate, auscope must know the port on which it should listen for audio clients, the name of the desktop  machine  on  which	the  audio
       server  is running and the port to use to connect to the audio server.  Both the output port (server) and input port (client) are automati-
       cally biased by 8000.  The output port defaults to 0 and the input port defaults to 1.

ARGUMENTS

       -i<input-port>
	       Specify the port that auscope will use to take requests from clients.

       -o<output-port>
	       Determines the port that auscope will use to connect to the audio server.

       -h<audio server name>
	       Determines the desktop machine name that auscope will use to find the audio server.

       -v<print-level>
	       Determines the level of printing which auscope will provide.  The print-level can be 0 or 1.  The larger  numbers  provide  greater
	       output detail.

EXAMPLES

       In  the	following  example,  mcxterm is the name of the desktop machine running the audio server, which is connected to the TCP/IP network
       host tcphost.  auscope uses the desktop machine with the -h command line option, will listen for client requests on port 8001  and  connect
       to the audio server on port 8000.

       Ports  (file  descriptors)  on the network host are used to read and write the audio protocol.  The audio client auplay will connect to the
       audio server via the TCP/IP network host tcphost and port 8001:

	      auscope -i1 -o0 -hmcxterm

	      auplay -audio tcp/tcphost:8001 dial.snd

       In the following example, the auscope verbosity is increased to 1, and the audio client autool will connect to the  audio  server  via  the
       network host tcphost, while displaying its graphical interface on another server labmcx:

	      auscope -i1 -o0 -hmcxterm -v1

	      autool -audio tcp/tcphost:8001 -display labmcx:0.0

SEE ALSO

       nas(1), perl(1)

COPYRIGHT

       Copyright 1994 Network Computing Devices, Inc.

AUTHOR

       Greg Renda, Network Computing Devices, Inc.

								       1.9.3								AUSCOPE(1)