10-29-2002
okay , guys thanx alot , for your help , i could get it resolved by my self , here is procedure:
1.ifconfig interface name address mask up example:ifconfig le0 xx.xx.xx.xx netmask (subnet mask here) up
2.create /etc/hostname.le0 , add ur host name to it ,for example sparky or whatever.
3.edit your /etc/hosts file to have locol host and your host name with i p address you set.
4.add i p address of your ISP default gateway to your /etc/defaultrouter
5.edit /etc/nsswitch file , to read host line as dns files
6.creat /etc/resolv.conf , add your domain name and nameserver
7. and better create a file /etc/dhcp.le0 (to get ip of your cable modem provider automaticaly using DHCP.
and reboot with init 6.
but never forget to switch of ur cable modem and restart again, (that was mistake i made , and coudn't figured it out)
make check on reboot with ifconfig -a , and netstat -rn
thanx any way
raju
10 More Discussions You Might Find Interesting
1. IP Networking
If the cable modem that the cable company is using doesn't support unix is there a way around that . Are there drivers I can get online or is there a way to configure redhat lenix (that's what I will be using) to work with the cable modem. Or is there a way to buy a third party cable modem that... (3 Replies)
Discussion started by: gparsons70
3 Replies
2. UNIX for Dummies Questions & Answers
I recently installed Caldera 2.4 (successfully:p ), but I cannot seem to get my cable modem up and running! My ISP is AT&T and I'm using @home. I've tried using DHCP and that didn't work either. I briefly read the cable modem HOWTO, but the lsmod didn't list my network card (3COM). What do I do now? (4 Replies)
Discussion started by: zorro
4 Replies
3. UNIX for Dummies Questions & Answers
Caldera eDesktop 2.4 - Cable Modem
my NIC card has been detected, but funny scenario:
#dmesg
eth0: RealTek rtl8139 Fast Ethernet at 0x2400, IRQ 0, 00:50:ba:43:a0:ef
/*I noticed that it detected the correct module (rtl8139) but I'm using D-Link and not RealTek, which uses the same module.... (1 Reply)
Discussion started by: zorro
1 Replies
4. UNIX for Dummies Questions & Answers
Is anyone using a cable modem with unix and if so does your cable co. support unix or did you get that going on your own and how.
Thank you for all your help. (5 Replies)
Discussion started by: gparsons70
5 Replies
5. IP Networking
I can do all this in windows, but Im trying to run the SuSe 8.0 professional as a gateway. I have the local (private) LAN setup with no problems, but Im having troubles getting it to use DHCP to go out on the external card to the service provider, which only uses Dynamic IP's. WHere, what and how... (3 Replies)
Discussion started by: ftn96
3 Replies
6. UNIX for Dummies Questions & Answers
Ok I am new to this and wondering if there is any way of connecting a cable modem to an SGI that is running IRIX 6.5 and how to do it... (1 Reply)
Discussion started by: Acidjack
1 Replies
7. BSD
hi
I want to setup my cable modem under OpenBSD. I did not configure my network while installing the system.
When I type, I get
# ifconfig -a
lo0 : ....
...
...
rl0 : ....
...
...
vr0 : ...
...
...
I have two network cards (the machine will be a router).
I created... (1 Reply)
Discussion started by: fnoyan
1 Replies
8. Solaris
Hi all,
Is there any difference between a null modem cable or a modem cable ?
i assume that a null modem cable is a normal cable that i used from cpu serial ports to a modem for dialup.
please correct if i am wrong,
thks (2 Replies)
Discussion started by: waterbear
2 Replies
9. Solaris
Hi Gurus,
Can I use null modem cable in Ultra sparc 10 workstation
Thanks (3 Replies)
Discussion started by: kumarmani
3 Replies
10. OS X (Apple)
Hi.
I have a very strange problem, so strange I don't even know which sub-forum to post it to.
Last week, my cable modem broke, so I took it back and got a new one.
The new one doesn't work with my old router so, for now, I have to connect the modem directly to my Mac with an ethernet... (14 Replies)
Discussion started by: Scott
14 Replies
LEARN ABOUT ULTRIX
resolv.conf
resolv.conf(5) File Formats Manual resolv.conf(5)
Name
resolv.conf - resolver configuration file
Description
The resolver configuration file, contains information that the resolver routines read the first time they are invoked by a process. The
resolver file contains ASCII text and lists the name-value pairs that provide various types of resolver information.
The file is required if your system is running BIND. This file must contain the BIND domain name for the local area network. If your sys-
tem is a BIND client, this file must also contain nameserver entries.
There are two entry formats for the file:
domain binddomain
This line specifies the default domain to append to local host names. If no domain entries are present, the domain returned by
after the first dot (.) is used. If the host name does not contain a domain, the root domain is assumed.
nameserver address
In this entry, the address is the IP address, in dot notation, of the BIND server that should be queried to resolve host name and
address information. You should have at least one name server listed. Two or more name servers reduces the possibility of inter-
rupted BIND service in the event that one of the servers is down. You can list up to (10) name servers. If more than one server is
listed, the resolver library queries you to try them in the order listed. If no name server entries are present, the default is to
use the name server on the local machine.
The algorithm used is to try a name server, and, if the query times out, to try the next, until out of name servers or the query is
resolved. The last step is to repeat trying all the name servers until a maximum number of retries has been made or the query has
been resolved.
The name value pair must appear on a single line, and the keyword or must start each line.
Examples
The following is an example of a file:
;
; Data file for a client
;
domain cities.us
nameserver 128.11.22.33
Lines beginning with a semicolon (;) are comment lines.
Files
See Also
gethostname(2), resolver(3), named(8)
Guide to the BIND Service
resolv.conf(5)