I see a couple of potential issue with this approach.
I still don't understand why you can't use the usual paradigm of passing vars with -v to awk and have to use this somewhat convoluted approach.
Any chance you can attach a sample file?
I will put together a sample directory and post it.
The -v method works for the comments and replace line, no matter if there are special characters or spaces. It is the $look_for line that is the problem. This version of the code does not work. The $look_for line is never found.
If you replace,
else if($0 ~ find_line)
with,
else if($0 ~ / PARAMETER \(SIZEXX = /)
then it will function. This is hard coding specifically for each item to find and so can't be used in a function. I read that the -v option presented difficulties when using characters that need to be escaped and that is when I switched to the temporary environment variables that I read about on a stackexchange post (I think). I don't understand why it works, but not in the function.
I will post some samples in a few minutes. I need another cup of coffee.
Hi ,
I have three funcions f1, f2 and f3 .
f1 calls f2 and f2 calls f3 .
I have a global variable "period" which i want to pass to f3 .
Can i pass the variable directly in the definition of f3 ?
Pls help .
sars (4 Replies)
Hi,
I have the following statement which parses a string for me and prints it out:
l_comp="dc000.runksh.test.ksh|
$g_sql/dc0000.runksh_test.sql|new.dat|control.ctl"
echo $l_comp | awk -F"|" '{ for ( i = 1; i <= NF; i++) { print $i; } } '
Rather then printing the data, I would like to... (5 Replies)
Hello.
Looking for a method of modularizing my bash script, I am stuck with such a problem. For example, I have:
MODULE_NAME="test"
FUNCTION_NAME="run"
How do I can a function with name test_run? (4 Replies)
Hello,
I have a problem with package and name space.
require "/Mehran/DSGateEngineLib/general.pl";
use strict;
sub System_Status_Main_Service_Status_Intrusion_Prevention
{
my %idpstatus;
my @result;
&General_ReadHash("/var/dsg/idp/settings",\%idpstatus);
#print... (4 Replies)
Dear all,
Could you please advice as I when call function i found the following error
" refills: command not found" note that refills is function name.
following also the function and how i call it
function refills
{
echo "formatting refills and telepin" >> $log
awk -F,... (20 Replies)
Hi,
I have the following code in which i am trying to find ceil of 10th & 11th fields. For finding ceil i have a function in the awk statement. When i test it for some values say on command line it gives correct response(say $10=0 & $11=750). But when the same value occurs in a file having more 3... (5 Replies)
I've created a tag in the makefile:
mytag: $(shell ${PWD}/script.sh)
When i do: make clean - the script is executed
When i perform make or make mytag the script is again executed with the output:
make: Nothing to be done for mytag
What i want ?
I want script.sh to be executed only... (0 Replies)
My requirement is to call function ("fun1") from awk, and print its returned value along with $0.
fun1()
{
t=$1
printf "%02d\n", $t % 60;
}
echo "Hi There 23" | awk '{print $0; system(fun1 $3)}'
Any suggestions what to be modified in above code to achieve requirement.. (5 Replies)
Discussion started by: JSKOBS
5 Replies
LEARN ABOUT CENTOS
pmdabash
PMDABASH(1) General Commands Manual PMDABASH(1)NAME
pmdabash - Bourne-Again SHell trace performance metrics domain agent
SYNOPSIS
$PCP_PMDAS_DIR/bash/pmdabash [-C] [-d domain] [-l logfile] [-I interval] [-t timeout] [-U username] configfile
DESCRIPTION
pmdabash is an experimental Performance Metrics Domain Agent (PMDA) which exports "xtrace" events from a traced bash(1) process. This
includes the command execution information that would usually be sent to standard error with the set -x option to the shell.
Event metrics are exported showing each command executed, the function name and line number in the script, and a timestamp. Additionally,
the process identifier for the shell and its parent process are exported.
This requires bash version 4 or later.
A brief description of the pmdabash command line options follows:
-d It is absolutely crucial that the performance metrics domain number specified here is unique and consistent. That is, domain should
be different for every PMDA on the one host, and the same domain number should be used for the same PMDA on all hosts.
-l Location of the log file. By default, a log file named bash.log is written in the current directory of pmcd(1) when pmdabash is
started, i.e. $PCP_LOG_DIR/pmcd. If the log file cannot be created or is not writable, output is written to the standard error
instead.
-s Amount of time (in seconds) between subsequent evaluations of the shell trace file descriptor(s). The default is 2 seconds.
-m Maximum amount of memory to be allowed for each event queue (one per traced process). The default is 2 megabytes.
-U User account under which to run the agent. The default is the unprivileged "pcp" account in current versions of PCP, but in older
versions the superuser account ("root") was used by default.
INSTALLATION
In order for a host to export the names, help text and values for the bash performance metrics, do the following as root:
# cd $PCP_PMDAS_DIR/bash
# ./Install
As soon as an instrumented shell script (see INSTRUMENTATION selection below) is run, with tracing enabled, new metric values will appear -
no further setup of the agent is required.
If you want to undo the installation, do the following as root:
# cd $PCP_PMDAS_DIR/bash
# ./Remove
pmdabash is launched by pmcd(1) and should never be executed directly. The Install and Remove scripts notify pmcd(1) when the agent is
installed or removed.
INSTRUMENTATION
In order to allow the flow of event data between a bash(1) script and pmdabash, the script should take the following actions:
#!/bin/sh
source $PCP_DIR/etc/pcp.sh
pcp_trace on $@ # enable tracing
echo "awoke, $count"
pcp_trace off # disable tracing
The tracing can be enabled and disabled any number of times by the script. On successful installation of the agent, several metrics will
be available:
$ pminfo bash
bash.xtrace.numclients
bash.xtrace.maxmem
bash.xtrace.queuemem
bash.xtrace.count
bash.xtrace.records
bash.xtrace.parameters.pid
bash.xtrace.parameters.parent
bash.xtrace.parameters.lineno
bash.xtrace.parameters.function
bash.xtrace.parameters.command
When an instrumented script is running, the generation of event records can be verified using the pmevent(1) command, as follows:
$ pmevent -t 1 -x '' bash.xtrace.records
host: localhost
samples: all
bash.xtrace.records["4538 ./test-trace.sh 1 2 3"]: 5 event records
10:00:05.000 --- event record [0] flags 0x19 (point,id,parent) ---
bash.xtrace.parameters.pid 4538
bash.xtrace.parameters.parent 4432
bash.xtrace.parameters.lineno 43
bash.xtrace.parameters.command "true"
10:00:05.000 --- event record [1] flags 0x19 (point,id,parent) ---
bash.xtrace.parameters.pid 4538
bash.xtrace.parameters.parent 4432
bash.xtrace.parameters.lineno 45
bash.xtrace.parameters.command "(( count++ ))"
10:00:05.000 --- event record [2] flags 0x19 (point,id,parent) ---
bash.xtrace.parameters.pid 4538
bash.xtrace.parameters.parent 4432
bash.xtrace.parameters.lineno 46
bash.xtrace.parameters.command "echo 'awoke, 3'"
10:00:05.000 --- event record [3] flags 0x19 (point,id,parent) ---
bash.xtrace.parameters.pid 4538
bash.xtrace.parameters.parent 4432
bash.xtrace.parameters.lineno 47
bash.xtrace.parameters.command "tired 2"
10:00:05.000 --- event record [4] flags 0x19 (point,id,parent) ---
bash.xtrace.parameters.pid 4538
bash.xtrace.parameters.parent 4432
bash.xtrace.parameters.lineno 38
bash.xtrace.parameters.function "tired"
bash.xtrace.parameters.command "sleep 2"
FILES
$PCP_PMCDCONF_PATH
command line options used to launch pmdabash
$PCP_PMDAS_DIR/bash/help
default help text file for the bash metrics
$PCP_PMDAS_DIR/bash/Install
installation script for the pmdabash agent
$PCP_PMDAS_DIR/bash/Remove
undo installation script for pmdabash
$PCP_LOG_DIR/pmcd/bash.log
default log file for error messages and other information from pmdabash
PCP ENVIRONMENT
Environment variables with the prefix PCP_ are used to parameterize the file and directory names used by PCP. On each installation, the
file /etc/pcp.conf contains the local values for these variables. The $PCP_CONF variable may be used to specify an alternative configura-
tion file, as described in pcp.conf(5).
SEE ALSO bash(1), pmevent(1) and pmcd(1).
Performance Co-Pilot PCP PMDABASH(1)