Unix/Linux Go Back    


CentOS 7.0 - man page for bash (centos section 1)

Linux & Unix Commands - Search Man Pages
Man Page or Keyword Search:   man
Select Man Page Set:       apropos Keyword Search (sections above)


BASH(1) 										  BASH(1)

NAME
       bash - GNU Bourne-Again SHell

SYNOPSIS
       bash [options] [file]

COPYRIGHT
       Bash is Copyright (C) 1989-2011 by the Free Software Foundation, Inc.

DESCRIPTION
       Bash is an sh-compatible command language interpreter that executes commands read from the
       standard input or from a file.  Bash also incorporates useful features from the Korn and C
       shells (ksh and csh).

       Bash  is  intended to be a conformant implementation of the Shell and Utilities portion of
       the IEEE POSIX specification (IEEE Standard 1003.1).  Bash can be configured to be  POSIX-
       conformant by default.

OPTIONS
       All  of	the   single-character	shell  options	documented  in the description of the set
       builtin command can be used as options when the	shell  is  invoked.   In  addition,  bash
       interprets the following options when it is invoked:

       -c string If  the  -c option is present, then commands are read from string.  If there are
		 arguments after the string, they are  assigned  to  the  positional  parameters,
		 starting with $0.
       -i	 If the -i option is present, the shell is interactive.
       -l	 Make bash act as if it had been invoked as a login shell (see INVOCATION below).
       -r	 If  the -r option is present, the shell becomes restricted (see RESTRICTED SHELL
		 below).
       -s	 If the -s option is present, or if no arguments remain after option  processing,
		 then  commands  are  read from the standard input.  This option allows the posi-
		 tional parameters to be set when invoking an interactive shell.
       -D	 A list of all double-quoted strings preceded by $ is  printed	on  the  standard
		 output.  These are the strings that are subject to language translation when the
		 current locale is not C or POSIX.  This implies the -n option; no commands  will
		 be executed.
       [-+]O [shopt_option]
		 shopt_option  is  one	of  the  shell options accepted by the shopt builtin (see
		 SHELL BUILTIN COMMANDS below).  If shopt_option is present, -O sets the value of
		 that  option; +O unsets it.  If shopt_option is not supplied, the names and val-
		 ues of the shell options accepted by shopt are printed on the	standard  output.
		 If  the invocation option is +O, the output is displayed in a format that may be
		 reused as input.
       --	 A -- signals the end of options and disables  further	option	processing.   Any
		 arguments after the -- are treated as filenames and arguments.  An argument of -
		 is equivalent to --.

       Bash also interprets a number of multi-character options.  These options  must  appear  on
       the command line before the single-character options to be recognized.

       --debugger
	      Arrange  for the debugger profile to be executed before the shell starts.  Turns on
	      extended debugging mode (see the description of the extdebug option  to  the  shopt
	      builtin below).
       --dump-po-strings
	      Equivalent  to  -D,  but the output is in the GNU gettext po (portable object) file
	      format.
       --dump-strings
	      Equivalent to -D.
       --help Display a usage message on standard output and exit successfully.
       --init-file file
       --rcfile file
	      Execute commands from file instead of the  standard  personal  initialization  file
	      ~/.bashrc if the shell is interactive (see INVOCATION below).

       --login
	      Equivalent to -l.

       --noediting
	      Do  not use the GNU readline library to read command lines when the shell is inter-
	      active.

       --noprofile
	      Do not read either the system-wide startup file /etc/profile or any of the personal
	      initialization  files  ~/.bash_profile,  ~/.bash_login, or ~/.profile.  By default,
	      bash reads these files when it is invoked as a login shell (see INVOCATION below).

       --norc Do not read and execute the personal initialization file ~/.bashrc if the shell  is
	      interactive.  This option is on by default if the shell is invoked as sh.

       --posix
	      Change  the  behavior  of  bash  where the default operation differs from the POSIX
	      standard to match the standard (posix mode).

       --restricted
	      The shell becomes restricted (see RESTRICTED SHELL below).

       --rpm-requires
	      Produce the list of files that are required for the  shell  script  to  run.   This
	      implies  '-n' and is subject to the same limitations as compile time error checking
	      checking; Command substitutions, Conditional expressions and eval builtin  are  not
	      parsed so some dependencies may be missed.

       --verbose
	      Equivalent to  -v.

       --version
	      Show  version information for this instance of bash on the standard output and exit
	      successfully.

ARGUMENTS
       If arguments remain after option processing, and neither the -c nor the -s option has been
       supplied,  the  first  argument	is assumed to be the name of a file containing shell com-
       mands.  If bash is invoked in this fashion, $0 is set to the name of  the  file,  and  the
       positional  parameters  are  set to the remaining arguments.  Bash reads and executes com-
       mands from this file, then exits.  Bash's exit status is the exit status of the last  com-
       mand  executed  in  the	script.   If  no commands are executed, the exit status is 0.  An
       attempt is first made to open the file in the current directory, and, if no file is found,
       then the shell searches the directories in PATH for the script.

INVOCATION
       A  login  shell	is one whose first character of argument zero is a -, or one started with
       the --login option.

       An interactive shell is one started without non-option arguments and without the -c option
       whose  standard	input  and  error  are	both  connected  to  terminals	(as determined by
       isatty(3)), or one started with the -i option.  PS1 is set and $- includes i  if  bash  is
       interactive, allowing a shell script or a startup file to test this state.

       The  following  paragraphs  describe  how  bash executes its startup files.  If any of the
       files exist but cannot be read, bash reports an error.  Tildes are expanded in file  names
       as described below under Tilde Expansion in the EXPANSION section.

       When bash is invoked as an interactive login shell, or as a non-interactive shell with the
       --login option, it first reads and executes commands from the file /etc/profile,  if  that
       file  exists.   After  reading that file, it looks for ~/.bash_profile, ~/.bash_login, and
       ~/.profile, in that order, and reads and executes commands from the first one that  exists
       and  is readable.  The --noprofile option may be used when the shell is started to inhibit
       this behavior.

       When a login shell exits, bash reads and executes commands from the  files  ~/.bash_logout
       and /etc/bash.bash_logout, if the files exists.

       When  an  interactive  shell that is not a login shell is started, bash reads and executes
       commands from ~/.bashrc, if that file exists.  This may be inhibited by using  the  --norc
       option.	 The  --rcfile file option will force bash to read and execute commands from file
       instead of ~/.bashrc.

       When bash is started non-interactively, to run a shell script, for example, it  looks  for
       the  variable BASH_ENV in the environment, expands its value if it appears there, and uses
       the expanded value as the name of a file to read and execute.  Bash behaves as if the fol-
       lowing command were executed:
	      if [ -n "$BASH_ENV" ]; then . "$BASH_ENV"; fi
       but the value of the PATH variable is not used to search for the file name.

       If  bash is invoked with the name sh, it tries to mimic the startup behavior of historical
       versions of sh as closely as possible, while conforming to the  POSIX  standard	as  well.
       When  invoked  as  an interactive login shell, or a non-interactive shell with the --login
       option, it first attempts to read and execute commands from /etc/profile  and  ~/.profile,
       in that order.  The --noprofile option may be used to inhibit this behavior.  When invoked
       as an interactive shell with the name sh, bash looks for the  variable  ENV,  expands  its
       value if it is defined, and uses the expanded value as the name of a file to read and exe-
       cute.  Since a shell invoked as sh does not attempt to read and execute commands from  any
       other  startup  files, the --rcfile option has no effect.  A non-interactive shell invoked
       with the name sh does not attempt to read any other startup files.  When  invoked  as  sh,
       bash enters posix mode after the startup files are read.

       When  bash  is  started in posix mode, as with the --posix command line option, it follows
       the POSIX standard for startup files.  In this mode, interactive  shells  expand  the  ENV
       variable  and  commands	are  read  and	executed from the file whose name is the expanded
       value.  No other startup files are read.

       Bash attempts to determine when it is being run with its standard  input  connected  to	a
       network	connection,  as  when  executed  by the remote shell daemon, usually rshd, or the
       secure shell daemon sshd.  If bash determines it is being run in this  fashion,	it  reads
       and executes commands from ~/.bashrc, if that file exists and is readable.  It will not do
       this if invoked as sh.  The --norc option may be used to inhibit this  behavior,  and  the
       --rcfile  option may be used to force another file to be read, but rshd does not generally
       invoke the shell with those options or allow them to be specified.

       If the shell is started with the effective user (group) id not  equal  to  the  real  user
       (group)	id, and the -p option is not supplied, no startup files are read, shell functions
       are not inherited from the environment, the SHELLOPTS, BASHOPTS,  CDPATH,  and  GLOBIGNORE
       variables,  if  they  appear in the environment, are ignored, and the effective user id is
       set to the real user id.  If the -p option is supplied at invocation, the startup behavior
       is the same, but the effective user id is not reset.

DEFINITIONS
       The following definitions are used throughout the rest of this document.
       blank  A space or tab.
       word   A sequence of characters considered as a single unit by the shell.  Also known as a
	      token.
       name   A word consisting only of alphanumeric characters and  underscores,  and	beginning
	      with an alphabetic character or an underscore.  Also referred to as an identifier.
       metacharacter
	      A character that, when unquoted, separates words.  One of the following:
	      |  & ; ( ) < > space tab
       control operator
	      A token that performs a control function.  It is one of the following symbols:
	      || & && ; ;; ( ) | |& <newline>

RESERVED WORDS
       Reserved  words	are  words that have a special meaning to the shell.  The following words
       are recognized as reserved when unquoted and either the first word  of  a  simple  command
       (see SHELL GRAMMAR below) or the third word of a case or for command:

       !  case	 do done elif else esac fi for function if in select then until while { } time [[
       ]]

SHELL GRAMMAR
   Simple Commands
       A simple command is a sequence of optional variable assignments	followed  by  blank-sepa-
       rated words and redirections, and terminated by a control operator.  The first word speci-
       fies the command to be executed, and is passed as argument zero.  The remaining words  are
       passed as arguments to the invoked command.

       The return value of a simple command is its exit status, or 128+n if the command is termi-
       nated by signal n.

   Pipelines
       A pipeline is a sequence of one or more commands separated by one of the control operators
       | or |&.  The format for a pipeline is:

	      [time [-p]] [ ! ] command [ [|||&] command2 ... ]

       The  standard output of command is connected via a pipe to the standard input of command2.
       This connection is performed before any redirections specified by the command  (see  REDI-
       RECTION	below).   If |& is used, the standard error of command is connected to command2's
       standard input through the pipe; it is shorthand for 2>&1 |.  This implicit redirection of
       the standard error is performed after any redirections specified by the command.

       The  return  status  of	a  pipeline  is  the  exit status of the last command, unless the
       pipefail option is enabled.  If pipefail is enabled, the pipeline's return status  is  the
       value  of the last (rightmost) command to exit with a non-zero status, or zero if all com-
       mands exit successfully.  If the reserved word !  precedes a pipeline, the exit status  of
       that  pipeline  is  the logical negation of the exit status as described above.	The shell
       waits for all commands in the pipeline to terminate before returning a value.

       If the time reserved word precedes a pipeline, the elapsed as well as user and system time
       consumed  by  its  execution  are  reported  when  the pipeline terminates.  The -p option
       changes the output format to that specified by POSIX.  When the shell is in posix mode, it
       does not recognize time as a reserved word if the next token begins with a `-'.	The TIME-
       FORMAT variable may be set to a format string that specifies how  the  timing  information
       should be displayed; see the description of TIMEFORMAT under Shell Variables below.

       When  the  shell  is  in posix mode, time may be followed by a newline.	In this case, the
       shell displays the total user and system time consumed by the shell and its children.  The
       TIMEFORMAT variable may be used to specify the format of the time information.

       Each command in a pipeline is executed as a separate process (i.e., in a subshell).

   Lists
       A  list is a sequence of one or more pipelines separated by one of the operators ;, &, &&,
       or ||, and optionally terminated by one of ;, &, or <newline>.

       Of these list operators, && and || have equal precedence, followed by ; and &, which  have
       equal precedence.

       A  sequence of one or more newlines may appear in a list instead of a semicolon to delimit
       commands.

       If a command is terminated by the control operator &, the shell executes  the  command  in
       the  background in a subshell.  The shell does not wait for the command to finish, and the
       return status is 0.  Commands separated by a ; are executed sequentially; the shell  waits
       for  each  command to terminate in turn.  The return status is the exit status of the last
       command executed.

       AND and OR lists are sequences of one of more pipelines separated by the && and || control
       operators,  respectively.   AND and OR lists are executed with left associativity.  An AND
       list has the form

	      command1 && command2

       command2 is executed if, and only if, command1 returns an exit status of zero.

       An OR list has the form

	      command1 || command2

       command2 is executed if and only if command1 returns a non-zero exit status.   The  return
       status of AND and OR lists is the exit status of the last command executed in the list.

   Compound Commands
       A compound command is one of the following:

       (list) list  is	executed  in  a  subshell  environment (see COMMAND EXECUTION ENVIRONMENT
	      below).  Variable assignments and builtin commands that affect the shell's environ-
	      ment do not remain in effect after the command completes.  The return status is the
	      exit status of list.

       { list; }
	      list is simply executed in the current shell environment.  list must be  terminated
	      with  a newline or semicolon.  This is known as a group command.	The return status
	      is the exit status of list.  Note that unlike the metacharacters ( and ), {  and	}
	      are  reserved  words and must occur where a reserved word is permitted to be recog-
	      nized.  Since they do not cause a word break, they must be separated from  list  by
	      whitespace or another shell metacharacter.

       ((expression))
	      The expression is evaluated according to the rules described below under ARITHMETIC
	      EVALUATION.  If the value of the expression is non-zero, the return  status  is  0;
	      otherwise the return status is 1.  This is exactly equivalent to let "expression".

       [[ expression ]]
	      Return a status of 0 or 1 depending on the evaluation of the conditional expression
	      expression.  Expressions are composed of the primaries described below under CONDI-
	      TIONAL EXPRESSIONS.  Word splitting and pathname expansion are not performed on the
	      words between the [[ and ]]; tilde expansion,  parameter	and  variable  expansion,
	      arithmetic expansion, command substitution, process substitution, and quote removal
	      are performed.  Conditional operators such as -f must be unquoted to be  recognized
	      as primaries.

	      When  used  with [[, the < and > operators sort lexicographically using the current
	      locale.

	      When the == and != operators are used, the string to the right of the  operator  is
	      considered  a pattern and matched according to the rules described below under Pat-
	      tern Matching.  If the shell option nocasematch is enabled, the match is	performed
	      without  regard to the case of alphabetic characters.  The return value is 0 if the
	      string matches (==) or does not match (!=) the pattern, and 1 otherwise.	Any  part
	      of the pattern may be quoted to force it to be matched as a string.

	      An additional binary operator, =~, is available, with the same precedence as == and
	      !=.  When it is used, the string to the right of	the  operator  is  considered  an
	      extended	regular  expression and matched accordingly (as in regex(3)).  The return
	      value is 0 if the string matches the pattern, and  1  otherwise.	 If  the  regular
	      expression is syntactically incorrect, the conditional expression's return value is
	      2.  If the shell option nocasematch is enabled,  the  match  is  performed  without
	      regard to the case of alphabetic characters.  Any part of the pattern may be quoted
	      to force it to be matched as a string.  Substrings matched by parenthesized  subex-
	      pressions   within   the	regular  expression  are  saved  in  the  array  variable
	      BASH_REMATCH.  The element of BASH_REMATCH with index  0	is  the  portion  of  the
	      string  matching	the  entire regular expression.  The element of BASH_REMATCH with
	      index n is the portion of the string matching the nth parenthesized subexpression.

	      Expressions may be combined using the following  operators,  listed  in  decreasing
	      order of precedence:

	      ( expression )
		     Returns  the  value  of expression.  This may be used to override the normal
		     precedence of operators.
	      ! expression
		     True if expression is false.
	      expression1 && expression2
		     True if both expression1 and expression2 are true.
	      expression1 || expression2
		     True if either expression1 or expression2 is true.

	      The && and || operators do not evaluate expression2 if the value of expression1  is
	      sufficient to determine the return value of the entire conditional expression.

       for name [ [ in [ word ... ] ] ; ] do list ; done
	      The  list of words following in is expanded, generating a list of items.	The vari-
	      able name is set to each element of this list in turn, and list  is  executed  each
	      time.  If the in word is omitted, the for command executes list once for each posi-
	      tional parameter that is set (see PARAMETERS below).  The return status is the exit
	      status  of the last command that executes.  If the expansion of the items following
	      in results in an empty list, no commands are executed, and the return status is 0.

       for (( expr1 ; expr2 ; expr3 )) ; do list ; done
	      First, the  arithmetic  expression  expr1  is  evaluated	according  to  the  rules
	      described  below	under  ARITHMETIC EVALUATION.  The arithmetic expression expr2 is
	      then evaluated repeatedly until it evaluates to zero.  Each time expr2 evaluates to
	      a  non-zero  value,  list is executed and the arithmetic expression expr3 is evalu-
	      ated.  If any expression is omitted, it behaves as  if  it  evaluates  to  1.   The
	      return  value  is  the exit status of the last command in list that is executed, or
	      false if any of the expressions is invalid.

       select name [ in word ] ; do list ; done
	      The list of words following in is expanded, generating a list of items.  The set of
	      expanded words is printed on the standard error, each preceded by a number.  If the
	      in word is omitted, the positional parameters are printed (see  PARAMETERS  below).
	      The  PS3	prompt is then displayed and a line read from the standard input.  If the
	      line consists of a number corresponding to one of the  displayed	words,	then  the
	      value  of name is set to that word.  If the line is empty, the words and prompt are
	      displayed again.	If EOF is read, the command  completes.   Any  other  value  read
	      causes  name to be set to null.  The line read is saved in the variable REPLY.  The
	      list is executed after each selection until a break command is executed.	The  exit
	      status  of  select is the exit status of the last command executed in list, or zero
	      if no commands were executed.

       case word in [ [(] pattern [ | pattern ] ... ) list ;; ] ... esac
	      A case command first expands word, and tries to match it against	each  pattern  in
	      turn,  using the same matching rules as for pathname expansion (see Pathname Expan-
	      sion below).  The word is expanded using tilde expansion,  parameter  and  variable
	      expansion,  arithmetic substitution, command substitution, process substitution and
	      quote removal.  Each pattern examined is expanded using tilde expansion,	parameter
	      and  variable expansion, arithmetic substitution, command substitution, and process
	      substitution.  If the shell option nocasematch is enabled, the match  is	performed
	      without  regard  to  the case of alphabetic characters.  When a match is found, the
	      corresponding list is executed.  If the ;; operator is used, no subsequent  matches
	      are attempted after the first pattern match.  Using ;& in place of ;; causes execu-
	      tion to continue with the list associated with the next set of patterns.	Using ;;&
	      in  place of ;; causes the shell to test the next pattern list in the statement, if
	      any, and execute any associated list on a successful match.   The  exit  status  is
	      zero  if	no pattern matches.  Otherwise, it is the exit status of the last command
	      executed in list.

       if list; then list; [ elif list; then list; ] ... [ else list; ] fi
	      The if list is executed.	If its exit status is zero, the then  list  is	executed.
	      Otherwise,  each elif list is executed in turn, and if its exit status is zero, the
	      corresponding then list is executed and the command completes.  Otherwise, the else
	      list  is executed, if present.  The exit status is the exit status of the last com-
	      mand executed, or zero if no condition tested true.

       while list-1; do list-2; done
       until list-1; do list-2; done
	      The while command continuously executes the list list-2 as long as the last command
	      in  the list list-1 returns an exit status of zero.  The until command is identical
	      to the while command, except that the test is negated; list-2 is executed  as  long
	      as  the  last command in list-1 returns a non-zero exit status.  The exit status of
	      the while and until commands is the exit status of the  last  command  executed  in
	      list-2, or zero if none was executed.

   Coprocesses
       A  coprocess is a shell command preceded by the coproc reserved word.  A coprocess is exe-
       cuted asynchronously in a subshell, as if the command had been terminated with the &  con-
       trol  operator, with a two-way pipe established between the executing shell and the copro-
       cess.

       The format for a coprocess is:

	      coproc [NAME] command [redirections]

       This creates a coprocess named NAME.  If NAME is not supplied, the default name is COPROC.
       NAME  must  not	be  supplied if command is a simple command (see above); otherwise, it is
       interpreted as the first word of the simple command.  When the  coproc  is  executed,  the
       shell  creates  an array variable (see Arrays below) named NAME in the context of the exe-
       cuting shell.  The standard output of command is connected via a pipe to a file descriptor
       in  the	executing  shell,  and that file descriptor is assigned to NAME[0].  The standard
       input of command is connected via a pipe to a file descriptor in the executing shell,  and
       that file descriptor is assigned to NAME[1].  This pipe is established before any redirec-
       tions specified by the command (see REDIRECTION below).	The file descriptors can be  uti-
       lized as arguments to shell commands and redirections using standard word expansions.  The
       process ID of the shell spawned to execute the coprocess is available as the value of  the
       variable NAME_PID.  The wait builtin command may be used to wait for the coprocess to ter-
       minate.

       The return status of a coprocess is the exit status of command.

   Shell Function Definitions
       A shell function is an object that is called like a simple command and executes a compound
       command with a new set of positional parameters.  Shell functions are declared as follows:

       name () compound-command [redirection]
       function name [()] compound-command [redirection]
	      This  defines  a	function named name.  The reserved word function is optional.  If
	      the function reserved word is supplied, the parentheses are optional.  The body  of
	      the  function  is  the  compound	command  compound-command  (see Compound Commands
	      above).  That command is usually a list of commands between { and }, but may be any
	      command  listed  under Compound Commands above.  compound-command is executed when-
	      ever name is specified as the name of a simple command.  Any redirections (see  RE-
	      DIRECTION  below) specified when a function is defined are performed when the func-
	      tion is executed.  The exit status of a function definition is zero unless a syntax
	      error  occurs  or a readonly function with the same name already exists.	When exe-
	      cuted, the exit status of a function is the exit status of the  last  command  exe-
	      cuted in the body.  (See FUNCTIONS below.)

COMMENTS
       In  a  non-interactive  shell,  or  an interactive shell in which the interactive_comments
       option to the shopt builtin is enabled (see SHELL BUILTIN COMMANDS below), a  word  begin-
       ning  with # causes that word and all remaining characters on that line to be ignored.  An
       interactive shell without the interactive_comments option enabled does not allow comments.
       The interactive_comments option is on by default in interactive shells.

QUOTING
       Quoting is used to remove the special meaning of certain characters or words to the shell.
       Quoting can be used to disable  special	treatment  for	special  characters,  to  prevent
       reserved words from being recognized as such, and to prevent parameter expansion.

       Each of the metacharacters listed above under DEFINITIONS has special meaning to the shell
       and must be quoted if it is to represent itself.

       When the command history expansion  facilities  are  being  used  (see  HISTORY	EXPANSION
       below),	the  history  expansion  character,  usually !, must be quoted to prevent history
       expansion.

       There are three quoting mechanisms:  the  escape  character,  single  quotes,  and  double
       quotes.

       A non-quoted backslash (\) is the escape character.  It preserves the literal value of the
       next character that follows, with the  exception  of  <newline>.   If  a  \<newline>  pair
       appears,  and the backslash is not itself quoted, the \<newline> is treated as a line con-
       tinuation (that is, it is removed from the input stream and effectively ignored).

       Enclosing characters in single quotes preserves the literal value of each character within
       the  quotes.   A single quote may not occur between single quotes, even when preceded by a
       backslash.

       Enclosing characters in double quotes preserves the literal value of all characters within
       the quotes, with the exception of $, `, \, and, when history expansion is enabled, !.  The
       characters $ and ` retain their special	meaning  within  double  quotes.   The	backslash
       retains	its  special meaning only when followed by one of the following characters: $, `,
       ", \, or <newline>.  A double quote may be quoted within double	quotes	by  preceding  it
       with  a backslash.  If enabled, history expansion will be performed unless an !	appearing
       in double quotes is escaped using a backslash.  The backslash  preceding  the  !   is  not
       removed.

       The  special parameters * and @ have special meaning when in double quotes (see PARAMETERS
       below).

       Words of the form $'string' are treated specially.  The word expands to string, with back-
       slash-escaped  characters  replaced as specified by the ANSI C standard.  Backslash escape
       sequences, if present, are decoded as follows:
	      \a     alert (bell)
	      \b     backspace
	      \e
	      \E     an escape character
	      \f     form feed
	      \n     new line
	      \r     carriage return
	      \t     horizontal tab
	      \v     vertical tab
	      \\     backslash
	      \'     single quote
	      \"     double quote
	      \nnn   the eight-bit character whose value is the octal value  nnn  (one	to  three
		     digits)
	      \xHH   the  eight-bit character whose value is the hexadecimal value HH (one or two
		     hex digits)
	      \uHHHH the Unicode (ISO/IEC 10646) character whose value is the  hexadecimal  value
		     HHHH (one to four hex digits)
	      \UHHHHHHHH
		     the  Unicode  (ISO/IEC 10646) character whose value is the hexadecimal value
		     HHHHHHHH (one to eight hex digits)
	      \cx    a control-x character

       The expanded result is single-quoted, as if the dollar sign had not been present.

       A double-quoted string preceded by a dollar sign ($"string") will cause the string  to  be
       translated according to the current locale.  If the current locale is C or POSIX, the dol-
       lar sign is ignored.  If the string is translated and replaced, the replacement is double-
       quoted.

PARAMETERS
       A  parameter  is  an entity that stores values.	It can be a name, a number, or one of the
       special characters listed below under Special  Parameters.   A  variable  is  a	parameter
       denoted	by  a  name.  A variable has a value and zero or more attributes.  Attributes are
       assigned using the declare builtin command (see declare below in SHELL BUILTIN COMMANDS).

       A parameter is set if it has been assigned a value.  The null string  is  a  valid  value.
       Once a variable is set, it may be unset only by using the unset builtin command (see SHELL
       BUILTIN COMMANDS below).

       A variable may be assigned to by a statement of the form

	      name=[value]

       If value is not given, the variable is assigned the null string.  All values undergo tilde
       expansion,  parameter  and variable expansion, command substitution, arithmetic expansion,
       and quote removal (see EXPANSION below).  If the variable has its integer  attribute  set,
       then  value is evaluated as an arithmetic expression even if the $((...)) expansion is not
       used (see Arithmetic Expansion below).  Word splitting is not performed, with  the  excep-
       tion  of "$@" as explained below under Special Parameters.  Pathname expansion is not per-
       formed.	Assignment statements may also appear as arguments to the alias,  declare,  type-
       set, export, readonly, and local builtin commands.

       In  the	context where an assignment statement is assigning a value to a shell variable or
       array index, the += operator can be used to append to or add to	the  variable's  previous
       value.	When  +=  is  applied to a variable for which the integer attribute has been set,
       value is evaluated as an arithmetic expression and added to the variable's current  value,
       which  is  also evaluated.  When += is applied to an array variable using compound assign-
       ment (see Arrays below), the variable's value is not unset (as it is when  using  =),  and
       new  values  are  appended  to the array beginning at one greater than the array's maximum
       index (for indexed arrays) or added as additional key-value pairs in an associative array.
       When applied to a string-valued variable, value is expanded and appended to the variable's
       value.

   Positional Parameters
       A positional parameter is a parameter denoted by one or more digits, other than the single
       digit  0.   Positional  parameters  are	assigned  from	the  shell's arguments when it is
       invoked, and may be reassigned using the set builtin command.  Positional  parameters  may
       not  be assigned to with assignment statements.	The positional parameters are temporarily
       replaced when a shell function is executed (see FUNCTIONS below).

       When a positional parameter consisting of more than a single digit is expanded, it must be
       enclosed in braces (see EXPANSION below).

   Special Parameters
       The  shell  treats several parameters specially.  These parameters may only be referenced;
       assignment to them is not allowed.
       *      Expands to the positional parameters, starting from one.	When the expansion occurs
	      within  double quotes, it expands to a single word with the value of each parameter
	      separated by the first character of the IFS special variable.   That  is,  "$*"  is
	      equivalent  to  "$1c$2c...", where c is the first character of the value of the IFS
	      variable.  If IFS is unset, the parameters are separated	by  spaces.   If  IFS  is
	      null, the parameters are joined without intervening separators.
       @      Expands to the positional parameters, starting from one.	When the expansion occurs
	      within double quotes, each parameter expands to a separate word.	That is, "$@"  is
	      equivalent  to  "$1" "$2" ...  If the double-quoted expansion occurs within a word,
	      the expansion of the first parameter is joined with the beginning part of the orig-
	      inal  word, and the expansion of the last parameter is joined with the last part of
	      the original word.  When there are no positional parameters, "$@" and $@ expand  to
	      nothing (i.e., they are removed).
       #      Expands to the number of positional parameters in decimal.
       ?      Expands to the exit status of the most recently executed foreground pipeline.
       -      Expands  to  the	current  option  flags	as  specified upon invocation, by the set
	      builtin command, or those set by the shell itself (such as the -i option).
       $      Expands to the process ID of the shell.  In  a  ()  subshell,  it  expands  to  the
	      process ID of the current shell, not the subshell.
       !      Expands  to  the process ID of the most recently executed background (asynchronous)
	      command.
       0      Expands to the name of the shell or shell script.  This is set at shell initializa-
	      tion.   If  bash	is invoked with a file of commands, $0 is set to the name of that
	      file.  If bash is started with the -c option, then $0 is set to the first  argument
	      after  the  string  to be executed, if one is present.  Otherwise, it is set to the
	      file name used to invoke bash, as given by argument zero.
       _      At shell startup, set to the absolute pathname used to invoke the  shell	or  shell
	      script being executed as passed in the environment or argument list.  Subsequently,
	      expands to the last argument to the previous command, after expansion.  Also set to
	      the  full  pathname used to invoke each command executed and placed in the environ-
	      ment exported to that command.  When checking mail, this parameter holds	the  name
	      of the mail file currently being checked.

   Shell Variables
       The following variables are set by the shell:

       BASH   Expands to the full file name used to invoke this instance of bash.
       BASHOPTS
	      A  colon-separated list of enabled shell options.  Each word in the list is a valid
	      argument for the -s option to the shopt builtin command (see SHELL BUILTIN COMMANDS
	      below).	The  options appearing in BASHOPTS are those reported as on by shopt.  If
	      this variable is in the environment when bash starts up, each shell option  in  the
	      list will be enabled before reading any startup files.  This variable is read-only.
       BASHPID
	      Expands  to the process ID of the current bash process.  This differs from $$ under
	      certain circumstances, such as subshells that do not require bash to be re-initial-
	      ized.
       BASH_ALIASES
	      An  associative  array  variable	whose  members correspond to the internal list of
	      aliases as maintained by the alias builtin.  Elements added to this array appear in
	      the alias list; unsetting array elements cause aliases to be removed from the alias
	      list.
       BASH_ARGC
	      An array variable whose values are the number of parameters in each  frame  of  the
	      current bash execution call stack.  The number of parameters to the current subrou-
	      tine (shell function or script executed with . or source) is  at	the  top  of  the
	      stack.   When  a	subroutine is executed, the number of parameters passed is pushed
	      onto BASH_ARGC.  The shell sets BASH_ARGC only when in extended debugging mode (see
	      the description of the extdebug option to the shopt builtin below)
       BASH_ARGV
	      An  array  variable  containing all of the parameters in the current bash execution
	      call stack.  The final parameter of the last subroutine call is at the top  of  the
	      stack; the first parameter of the initial call is at the bottom.	When a subroutine
	      is executed, the parameters supplied are pushed onto  BASH_ARGV.	 The  shell  sets
	      BASH_ARGV only when in extended debugging mode (see the description of the extdebug
	      option to the shopt builtin below)
       BASH_CMDS
	      An associative array variable whose members correspond to the internal  hash  table
	      of commands as maintained by the hash builtin.  Elements added to this array appear
	      in the hash table; unsetting array elements cause commands to be removed	from  the
	      hash table.
       BASH_COMMAND
	      The  command  currently being executed or about to be executed, unless the shell is
	      executing a command as the result of a trap, in which case it is the  command  exe-
	      cuting at the time of the trap.
       BASH_EXECUTION_STRING
	      The command argument to the -c invocation option.
       BASH_LINENO
	      An  array  variable  whose  members are the line numbers in source files where each
	      corresponding member of FUNCNAME was invoked.  ${BASH_LINENO[$i]} is the line  num-
	      ber  in the source file (${BASH_SOURCE[$i+1]}) where ${FUNCNAME[$i]} was called (or
	      ${BASH_LINENO[$i-1]} if referenced within another shell function).  Use  LINENO  to
	      obtain the current line number.
       BASH_REMATCH
	      An  array  variable  whose members are assigned by the =~ binary operator to the [[
	      conditional command.  The element with index 0 is the portion of the string  match-
	      ing  the entire regular expression.  The element with index n is the portion of the
	      string matching the nth parenthesized subexpression.  This variable is read-only.
       BASH_SOURCE
	      An array variable whose members are the source filenames	where  the  corresponding
	      shell  function  names in the FUNCNAME array variable are defined.  The shell func-
	      tion ${FUNCNAME[$i]} is defined in the  file  ${BASH_SOURCE[$i]}	and  called  from
	      ${BASH_SOURCE[$i+1]}.
       BASH_SUBSHELL
	      Incremented  by  one  each time a subshell or subshell environment is spawned.  The
	      initial value is 0.
       BASH_VERSINFO
	      A readonly array variable whose members hold version information for this  instance
	      of bash.	The values assigned to the array members are as follows:
	      BASH_VERSINFO[0]	      The major version number (the release).
	      BASH_VERSINFO[1]	      The minor version number (the version).
	      BASH_VERSINFO[2]	      The patch level.
	      BASH_VERSINFO[3]	      The build version.
	      BASH_VERSINFO[4]	      The release status (e.g., beta1).
	      BASH_VERSINFO[5]	      The value of MACHTYPE.
       BASH_VERSION
	      Expands to a string describing the version of this instance of bash.
       COMP_CWORD
	      An  index  into  ${COMP_WORDS}  of the word containing the current cursor position.
	      This variable is available only in shell functions invoked by the programmable com-
	      pletion facilities (see Programmable Completion below).
       COMP_KEY
	      The  key	(or  final  key  of a key sequence) used to invoke the current completion
	      function.
       COMP_LINE
	      The current command line.  This variable is available only in shell  functions  and
	      external	commands  invoked by the programmable completion facilities (see Program-
	      mable Completion below).
       COMP_POINT
	      The index of the current cursor position relative to the beginning of  the  current
	      command.	 If the current cursor position is at the end of the current command, the
	      value of this variable is equal to ${#COMP_LINE}.  This variable is available  only
	      in  shell  functions  and  external commands invoked by the programmable completion
	      facilities (see Programmable Completion below).
       COMP_TYPE
	      Set to an integer value corresponding to the  type  of  completion  attempted  that
	      caused a completion function to be called: TAB, for normal completion, ?, for list-
	      ing completions after successive tabs, !, for listing alternatives on partial  word
	      completion,  @,  to  list completions if the word is not unmodified, or %, for menu
	      completion.  This variable is available only in shell functions and  external  com-
	      mands  invoked  by the programmable completion facilities (see Programmable Comple-
	      tion below).
       COMP_WORDBREAKS
	      The set of characters that the readline library treats as word separators when per-
	      forming word completion.	If COMP_WORDBREAKS is unset, it loses its special proper-
	      ties, even if it is subsequently reset.
       COMP_WORDS
	      An array variable (see Arrays below) consisting of the individual words in the cur-
	      rent  command line.  The line is split into words as readline would split it, using
	      COMP_WORDBREAKS as described above.  This variable is available only in shell func-
	      tions  invoked  by the programmable completion facilities (see Programmable Comple-
	      tion below).
       COPROC An array variable (see Arrays below) created to hold the file descriptors for  out-
	      put from and input to an unnamed coprocess (see Coprocesses above).
       DIRSTACK
	      An  array variable (see Arrays below) containing the current contents of the direc-
	      tory stack.  Directories appear in the stack in the order they are displayed by the
	      dirs  builtin.   Assigning  to members of this array variable may be used to modify
	      directories already in the stack, but the pushd and popd builtins must be  used  to
	      add  and	remove directories.  Assignment to this variable will not change the cur-
	      rent directory.  If DIRSTACK is unset, it loses its special properties, even if  it
	      is subsequently reset.
       EUID   Expands to the effective user ID of the current user, initialized at shell startup.
	      This variable is readonly.
       FUNCNAME
	      An array variable containing the names of all shell functions currently in the exe-
	      cution call stack.  The element with index 0 is the name of any currently-executing
	      shell function.  The bottom-most element	(the  one  with  the  highest  index)  is
	      "main".  This variable exists only when a shell function is executing.  Assignments
	      to FUNCNAME have no effect and return an error status.  If FUNCNAME  is  unset,  it
	      loses its special properties, even if it is subsequently reset.

	      This  variable can be used with BASH_LINENO and BASH_SOURCE.  Each element of FUNC-
	      NAME has corresponding elements in BASH_LINENO and BASH_SOURCE to describe the call
	      stack.  For instance, ${FUNCNAME[$i]} was called from the file ${BASH_SOURCE[$i+1]}
	      at line number ${BASH_LINENO[$i]}.  The caller builtin displays  the  current  call
	      stack using this information.
       GROUPS An array variable containing the list of groups of which the current user is a mem-
	      ber.  Assignments to GROUPS have no effect and return an error status.   If  GROUPS
	      is unset, it loses its special properties, even if it is subsequently reset.
       HISTCMD
	      The  history  number,  or  index	in  the history list, of the current command.  If
	      HISTCMD is unset, it loses its special  properties,  even  if  it  is  subsequently
	      reset.
       HOSTNAME
	      Automatically set to the name of the current host.
       HOSTTYPE
	      Automatically  set to a string that uniquely describes the type of machine on which
	      bash is executing.  The default is system-dependent.
       LINENO Each time this parameter is referenced, the shell substitutes a decimal number rep-
	      resenting  the  current sequential line number (starting with 1) within a script or
	      function.  When not in a script or function, the value substituted is  not  guaran-
	      teed  to	be meaningful.	If LINENO is unset, it loses its special properties, even
	      if it is subsequently reset.
       MACHTYPE
	      Automatically set to a string that fully describes the system type on which bash is
	      executing,  in  the standard GNU cpu-company-system format.  The default is system-
	      dependent.
       MAPFILE
	      An array variable (see Arrays below) created to hold the text read by  the  mapfile
	      builtin when no variable name is supplied.
       OLDPWD The previous working directory as set by the cd command.
       OPTARG The value of the last option argument processed by the getopts builtin command (see
	      SHELL BUILTIN COMMANDS below).
       OPTIND The index of the next argument to be processed by the getopts builtin command  (see
	      SHELL BUILTIN COMMANDS below).
       OSTYPE Automatically  set to a string that describes the operating system on which bash is
	      executing.  The default is system-dependent.
       PIPESTATUS
	      An array variable (see Arrays below) containing a list of exit status  values  from
	      the  processes in the most-recently-executed foreground pipeline (which may contain
	      only a single command).
       PPID   The process ID of the shell's parent.  This variable is readonly.
       PWD    The current working directory as set by the cd command.
       RANDOM Each time this parameter is referenced, a random integer between	0  and	32767  is
	      generated.   The sequence of random numbers may be initialized by assigning a value
	      to RANDOM.  If RANDOM is unset, it loses its special properties, even if it is sub-
	      sequently reset.
       READLINE_LINE
	      The contents of the readline line buffer, for use with "bind -x" (see SHELL BUILTIN
	      COMMANDS below).
       READLINE_POINT
	      The position of the insertion point in the readline line buffer, for use with "bind
	      -x" (see SHELL BUILTIN COMMANDS below).
       REPLY  Set  to  the  line  of input read by the read builtin command when no arguments are
	      supplied.
       SECONDS
	      Each time this parameter is referenced, the number of seconds since  shell  invoca-
	      tion  is returned.  If a value is assigned to SECONDS, the value returned upon sub-
	      sequent references is the number of seconds since the  assignment  plus  the  value
	      assigned.  If SECONDS is unset, it loses its special properties, even if it is sub-
	      sequently reset.
       SHELLOPTS
	      A colon-separated list of enabled shell options.	Each word in the list is a  valid
	      argument	for  the -o option to the set builtin command (see SHELL BUILTIN COMMANDS
	      below).  The options appearing in SHELLOPTS are those reported as on by set -o.  If
	      this  variable  is in the environment when bash starts up, each shell option in the
	      list will be enabled before reading any startup files.  This variable is read-only.
       SHLVL  Incremented by one each time an instance of bash is started.
       UID    Expands to the user ID of the current user, initialized  at  shell  startup.   This
	      variable is readonly.

       The  following  variables  are  used  by the shell.  In some cases, bash assigns a default
       value to a variable; these cases are noted below.

       BASH_ENV
	      If this parameter is set when bash is executing a shell script, its value is inter-
	      preted  as a filename containing commands to initialize the shell, as in ~/.bashrc.
	      The value of BASH_ENV is subjected to parameter  expansion,  command  substitution,
	      and arithmetic expansion before being interpreted as a file name.  PATH is not used
	      to search for the resultant file name.
       BASH_XTRACEFD
	      If set to an integer corresponding to a valid file descriptor, bash will write  the
	      trace  output  generated	when set -x is enabled to that file descriptor.  The file
	      descriptor is closed when BASH_XTRACEFD is unset or assigned a new  value.   Unset-
	      ting  BASH_XTRACEFD  or assigning it the empty string causes the trace output to be
	      sent to the standard error.  Note that setting BASH_XTRACEFD  to	2  (the  standard
	      error  file  descriptor)	and  then  unsetting it will result in the standard error
	      being closed.
       CDPATH The search path for the cd command.  This is a colon-separated list of  directories
	      in  which  the shell looks for destination directories specified by the cd command.
	      A sample value is ".:~:/usr".
       COLUMNS
	      Used by the select compound command to determine the terminal width  when  printing
	      selection lists.	Automatically set upon receipt of a SIGWINCH.
       COMPREPLY
	      An  array  variable  from  which bash reads the possible completions generated by a
	      shell function invoked by the programmable completion  facility  (see  Programmable
	      Completion below).
       EMACS  If  bash	finds  this  variable in the environment when the shell starts with value
	      "t", it assumes that the shell is running in an Emacs  shell  buffer  and  disables
	      line editing.
       ENV    Similar to BASH_ENV; used when the shell is invoked in POSIX mode.
       FCEDIT The default editor for the fc builtin command.
       FIGNORE
	      A  colon-separated  list	of suffixes to ignore when performing filename completion
	      (see READLINE below).  A filename whose suffix matches one of the entries  in  FIG-
	      NORE is excluded from the list of matched filenames.  A sample value is ".o:~".
       FUNCNEST
	      If set to a numeric value greater than 0, defines a maximum function nesting level.
	      Function invocations that exceed this nesting level will cause the current  command
	      to abort.
       GLOBIGNORE
	      A  colon-separated  list of patterns defining the set of filenames to be ignored by
	      pathname expansion.  If a filename matched by a  pathname  expansion  pattern  also
	      matches one of the patterns in GLOBIGNORE, it is removed from the list of matches.
       HISTCONTROL
	      A  colon-separated list of values controlling how commands are saved on the history
	      list.  If the list of values includes ignorespace, lines which begin with  a  space
	      character  are  not  saved in the history list.  A value of ignoredups causes lines
	      matching the previous history entry to not be saved.   A	value  of  ignoreboth  is
	      shorthand for ignorespace and ignoredups.  A value of erasedups causes all previous
	      lines matching the current line to be removed from the  history  list  before  that
	      line  is	saved.	 Any  value  not in the above list is ignored.	If HISTCONTROL is
	      unset, or does not include a valid value, all lines read by the  shell  parser  are
	      saved on the history list, subject to the value of HISTIGNORE.  The second and sub-
	      sequent lines of a multi-line compound command are not tested, and are added to the
	      history regardless of the value of HISTCONTROL.
       HISTFILE
	      The  name  of  the file in which command history is saved (see HISTORY below).  The
	      default value is ~/.bash_history.  If unset, the command history is not saved  when
	      an interactive shell exits.
       HISTFILESIZE
	      The  maximum  number of lines contained in the history file.  When this variable is
	      assigned a value, the history file is truncated, if necessary, by removing the old-
	      est  entries,  to  contain no more than that number of lines.  The default value is
	      500.  The history file is also truncated to this size  after  writing  it  when  an
	      interactive shell exits.
       HISTIGNORE
	      A  colon-separated  list	of  patterns used to decide which command lines should be
	      saved on the history list.  Each pattern is anchored at the beginning of	the  line
	      and  must  match	the complete line (no implicit `*' is appended).  Each pattern is
	      tested against the line after the checks specified by HISTCONTROL are applied.   In
	      addition	to the normal shell pattern matching characters, `&' matches the previous
	      history line.  `&' may be escaped using  a  backslash;  the  backslash  is  removed
	      before  attempting  a  match.  The second and subsequent lines of a multi-line com-
	      pound command are not tested, and are added to the history regardless of the  value
	      of HISTIGNORE.
       HISTSIZE
	      The number of commands to remember in the command history (see HISTORY below).  The
	      default value is 500.
       HISTTIMEFORMAT
	      If this variable is set and not null, its value is used  as  a  format  string  for
	      strftime(3) to print the time stamp associated with each history entry displayed by
	      the history builtin.  If this variable is set, time stamps are written to the  his-
	      tory  file  so  they may be preserved across shell sessions.  This uses the history
	      comment character to distinguish timestamps from other history lines.
       HOME   The home directory of the current user; the default argument  for  the  cd  builtin
	      command.	The value of this variable is also used when performing tilde expansion.
       HOSTFILE
	      Contains	the  name  of a file in the same format as /etc/hosts that should be read
	      when the shell needs to complete a hostname.  The list of possible hostname comple-
	      tions  may be changed while the shell is running; the next time hostname completion
	      is attempted after the value is changed, bash adds the contents of the new file  to
	      the  existing list.  If HOSTFILE is set, but has no value, or does not name a read-
	      able file, bash attempts to read /etc/hosts to obtain the list of possible hostname
	      completions.  When HOSTFILE is unset, the hostname list is cleared.
       IFS    The Internal Field Separator that is used for word splitting after expansion and to
	      split lines into words with  the	read  builtin  command.   The  default	value  is
	      ``<space><tab><newline>''.
       IGNOREEOF
	      Controls	the  action of an interactive shell on receipt of an EOF character as the
	      sole input.  If set, the value is the number of consecutive  EOF	characters  which
	      must  be	typed as the first characters on an input line before bash exits.  If the
	      variable exists but does not have a numeric value, or has  no  value,  the  default
	      value is 10.  If it does not exist, EOF signifies the end of input to the shell.
       INPUTRC
	      The  filename  for  the readline startup file, overriding the default of ~/.inputrc
	      (see READLINE below).
       LANG   Used to determine the locale category for any category  not  specifically  selected
	      with a variable starting with LC_.
       LC_ALL This  variable  overrides the value of LANG and any other LC_ variable specifying a
	      locale category.
       LC_COLLATE
	      This variable determines the collation order used when sorting the results of path-
	      name  expansion,	and  determines  the  behavior	of range expressions, equivalence
	      classes, and collating sequences within pathname expansion and pattern matching.
       LC_CTYPE
	      This variable determines the interpretation of characters and the behavior of char-
	      acter classes within pathname expansion and pattern matching.
       LC_MESSAGES
	      This  variable  determines  the locale used to translate double-quoted strings pre-
	      ceded by a $.
       LC_NUMERIC
	      This variable determines the locale category used for number formatting.
       LINES  Used by the select compound command to determine the  column  length  for  printing
	      selection lists.	Automatically set upon receipt of a SIGWINCH.
       MAIL   If  this	parameter is set to a file or directory name and the MAILPATH variable is
	      not set, bash informs the user of the arrival of mail  in  the  specified  file  or
	      Maildir-format directory.
       MAILCHECK
	      Specifies  how often (in seconds) bash checks for mail.  The default is 60 seconds.
	      When it is time to check for mail, the shell does so before displaying the  primary
	      prompt.	If this variable is unset, or set to a value that is not a number greater
	      than or equal to zero, the shell disables mail checking.
       MAILPATH
	      A colon-separated list of file names to be checked for mail.   The  message  to  be
	      printed  when  mail arrives in a particular file may be specified by separating the
	      file name from the message with a `?'.  When used in the text of	the  message,  $_
	      expands to the name of the current mailfile.  Example:
	      MAILPATH='/var/mail/bfox?"You have mail":~/shell-mail?"$_ has mail!"'
	      Bash  supplies a default value for this variable, but the location of the user mail
	      files that it uses is system dependent (e.g., /var/mail/$USER).
       OPTERR If set to the value 1, bash  displays  error  messages  generated  by  the  getopts
	      builtin  command	(see  SHELL  BUILTIN COMMANDS below).  OPTERR is initialized to 1
	      each time the shell is invoked or a shell script is executed.
       PATH   The search path for commands.  It is a colon-separated list of directories in which
	      the  shell  looks for commands (see COMMAND EXECUTION below).  A zero-length (null)
	      directory name in the value of PATH indicates the current directory.  A null direc-
	      tory  name  may  appear as two adjacent colons, or as an initial or trailing colon.
	      The default path is system-dependent, and is set by the administrator who  installs
	      bash.  A common value is ``/usr/gnu/bin:/usr/local/bin:/usr/ucb:/bin:/usr/bin''.
       POSIXLY_CORRECT
	      If  this	variable  is  in the environment when bash starts, the shell enters posix
	      mode before reading the startup files, as if the --posix invocation option had been
	      supplied.   If it is set while the shell is running, bash enables posix mode, as if
	      the command set -o posix had been executed.
       PROMPT_COMMAND
	      If set, the value is executed as a command prior to issuing each primary prompt.
       PROMPT_DIRTRIM
	      If set to a number greater than zero, the value is used as the number  of  trailing
	      directory  components  to retain when expanding the \w and \W prompt string escapes
	      (see PROMPTING below).  Characters removed are replaced with an ellipsis.
       PS1    The value of this parameter is expanded (see PROMPTING below) and used as the  pri-
	      mary prompt string.  The default value is ``\s-\v\$ ''.
       PS2    The  value  of  this  parameter  is  expanded as with PS1 and used as the secondary
	      prompt string.  The default is ``> ''.
       PS3    The value of this parameter is used as the prompt for the select command (see SHELL
	      GRAMMAR above).
       PS4    The value of this parameter is expanded as with PS1 and the value is printed before
	      each command bash displays during an execution trace.  The first character  of  PS4
	      is replicated multiple times, as necessary, to indicate multiple levels of indirec-
	      tion.  The default is ``+ ''.
       SHELL  The full pathname to the shell is kept in this environment variable.  If it is  not
	      set  when  the  shell  starts,  bash assigns to it the full pathname of the current
	      user's login shell.
       TIMEFORMAT
	      The value of this parameter is used as a format string specifying  how  the  timing
	      information for pipelines prefixed with the time reserved word should be displayed.
	      The % character introduces an escape sequence that is expanded to a time	value  or
	      other  information.   The  escape  sequences and their meanings are as follows; the
	      braces denote optional portions.
	      %%	A literal %.
	      %[p][l]R	The elapsed time in seconds.
	      %[p][l]U	The number of CPU seconds spent in user mode.
	      %[p][l]S	The number of CPU seconds spent in system mode.
	      %P	The CPU percentage, computed as (%U + %S) / %R.

	      The optional p is a digit specifying the precision, the number of fractional digits
	      after a decimal point.  A value of 0 causes no decimal point or fraction to be out-
	      put.  At most three places after the decimal point may be specified;  values  of	p
	      greater than 3 are changed to 3.	If p is not specified, the value 3 is used.

	      The optional l specifies a longer format, including minutes, of the form MMmSS.FFs.
	      The value of p determines whether or not the fraction is included.

	      If  this	variable  is  not   set,   bash   acts	 as   if   it	had   the   value
	      $'\nreal\t%3lR\nuser\t%3lU\nsys%3lS'.   If the value is null, no timing information
	      is displayed.  A trailing newline is added when the format string is displayed.
       TMOUT  If set to a value greater than zero, TMOUT is treated as the  default  timeout  for
	      the  read  builtin.   The  select command terminates if input does not arrive after
	      TMOUT seconds when input is coming from a terminal.  In an interactive  shell,  the
	      value  is  interpreted as the number of seconds to wait for input after issuing the
	      primary prompt.  Bash terminates after waiting for that number of seconds if  input
	      does not arrive.
       TMPDIR If set, bash uses its value as the name of a directory in which bash creates tempo-
	      rary files for the shell's use.
       auto_resume
	      This variable controls how the shell interacts with the user and job  control.   If
	      this  variable is set, single word simple commands without redirections are treated
	      as candidates for resumption of an existing stopped job.	 There	is  no	ambiguity
	      allowed;	if  there  is  more than one job beginning with the string typed, the job
	      most recently accessed is selected.  The name of a stopped job, in this context, is
	      the  command line used to start it.  If set to the value exact, the string supplied
	      must match the name of a stopped job exactly; if set to substring, the string  sup-
	      plied needs to match a substring of the name of a stopped job.  The substring value
	      provides functionality analogous to the %?  job identifier (see JOB CONTROL below).
	      If  set to any other value, the supplied string must be a prefix of a stopped job's
	      name; this provides functionality analogous to the %string job identifier.
       histchars
	      The two or three characters which control history expansion and  tokenization  (see
	      HISTORY  EXPANSION below).  The first character is the history expansion character,
	      the character which signals the start of a history expansion,  normally  `!'.   The
	      second  character  is  the quick substitution character, which is used as shorthand
	      for re-running the previous command entered, substituting one string for another in
	      the  command.   The  default is `^'.  The optional third character is the character
	      which indicates that the remainder of the line is a comment when found as the first
	      character  of  a	word, normally `#'.  The history comment character causes history
	      substitution to be skipped for the remaining words on the line.  It does not neces-
	      sarily cause the shell parser to treat the rest of the line as a comment.

   Arrays
       Bash  provides  one-dimensional indexed and associative array variables.  Any variable may
       be used as an indexed array; the declare builtin will explicitly declare an array.   There
       is  no  maximum limit on the size of an array, nor any requirement that members be indexed
       or assigned contiguously.  Indexed arrays are referenced using integers (including  arith-
       metic  expressions)  and are zero-based; associative arrays are referenced using arbitrary
       strings.

       An indexed array is created automatically if any variable is assigned to using the  syntax
       name[subscript]=value.	The  subscript	is  treated as an arithmetic expression that must
       evaluate to a number.  If subscript evaluates to a number less than zero, it is used as an
       offset  from one greater than the array's maximum index (so a subcript of -1 refers to the
       last element of the array).  To explicitly declare an indexed array, use declare  -a  name
       (see SHELL BUILTIN COMMANDS below).  declare -a name[subscript] is also accepted; the sub-
       script is ignored.

       Associative arrays are created using declare -A name.

       Attributes may be specified for an array variable using the declare and readonly builtins.
       Each attribute applies to all members of an array.

       Arrays  are  assigned  to using compound assignments of the form name=(value1 ... valuen),
       where each value is of the form [subscript]=string.   Indexed  array  assignments  do  not
       require	the  bracket  and  subscript.	When assigning to indexed arrays, if the optional
       brackets and subscript are supplied, that index is assigned to; otherwise the index of the
       element assigned is the last index assigned to by the statement plus one.  Indexing starts
       at zero.

       When assigning to an associative array, the subscript is required.

       This syntax is also accepted by the declare builtin.  Individual  array	elements  may  be
       assigned to using the name[subscript]=value syntax introduced above.

       Any  element  of  an  array  may  be  referenced using ${name[subscript]}.  The braces are
       required to avoid conflicts with pathname expansion.  If subscript is @	or  *,	the  word
       expands to all members of name.	These subscripts differ only when the word appears within
       double quotes.  If the word is double-quoted, ${name[*]} expands to a single word with the
       value  of  each array member separated by the first character of the IFS special variable,
       and ${name[@]} expands each element of name to a separate word.	When there are	no  array
       members,  ${name[@]}  expands  to nothing.  If the double-quoted expansion occurs within a
       word, the expansion of the first parameter is joined with the beginning part of the origi-
       nal  word,  and	the  expansion	of the last parameter is joined with the last part of the
       original word.  This is analogous to the expansion of the special parameters * and @  (see
       Special	Parameters  above).   ${#name[subscript]}  expands  to	the length of ${name[sub-
       script]}.  If subscript is * or @, the expansion is the number of elements in  the  array.
       Referencing  an	array variable without a subscript is equivalent to referencing the array
       with a subscript of 0.

       An array variable is considered set if a subscript has been assigned a  value.	The  null
       string is a valid value.

       The  unset  builtin  is	used to destroy arrays.  unset name[subscript] destroys the array
       element at index subscript.  Care must be taken to avoid unwanted side effects  caused  by
       pathname  expansion.   unset name, where name is an array, or unset name[subscript], where
       subscript is * or @, removes the entire array.

       The declare, local, and readonly builtins each accept a -a option to  specify  an  indexed
       array  and  a -A option to specify an associative array.  If both options are supplied, -A
       takes precedence.  The read builtin accepts a -a option to assign a  list  of  words  read
       from the standard input to an array.  The set and declare builtins display array values in
       a way that allows them to be reused as assignments.

EXPANSION
       Expansion is performed on the command line after it has been split into words.  There  are
       seven  kinds of expansion performed: brace expansion, tilde expansion, parameter and vari-
       able expansion, command substitution, arithmetic expansion, word splitting,  and  pathname
       expansion.

       The  order  of  expansions  is:	brace expansion, tilde expansion, parameter, variable and
       arithmetic expansion and command substitution (done  in	a  left-to-right  fashion),  word
       splitting, and pathname expansion.

       On  systems  that can support it, there is an additional expansion available: process sub-
       stitution.

       Only brace expansion, word splitting, and pathname expansion  can  change  the  number  of
       words  of the expansion; other expansions expand a single word to a single word.  The only
       exceptions to this are the expansions of "$@" and "${name[@]}"  as  explained  above  (see
       PARAMETERS).

   Brace Expansion
       Brace  expansion  is a mechanism by which arbitrary strings may be generated.  This mecha-
       nism is similar to pathname expansion, but the filenames generated need not  exist.   Pat-
       terns  to  be  brace  expanded take the form of an optional preamble, followed by either a
       series of comma-separated strings or a sequence expression between a pair of braces,  fol-
       lowed by an optional postscript.  The preamble is prefixed to each string contained within
       the braces, and the postscript is then appended to each resulting string,  expanding  left
       to right.

       Brace  expansions may be nested.  The results of each expanded string are not sorted; left
       to right order is preserved.  For example, a{d,c,b}e expands into `ade ace abe'.

       A sequence expression takes the form {x..y[..incr]}, where x and y are either integers  or
       single characters, and incr, an optional increment, is an integer.  When integers are sup-
       plied, the expression expands to each number between x and y, inclusive.   Supplied  inte-
       gers may be prefixed with 0 to force each term to have the same width.  When either x or y
       begins with a zero, the shell attempts to force all generated terms to  contain	the  same
       number of digits, zero-padding where necessary.	When characters are supplied, the expres-
       sion expands to each character lexicographically between x and y,  inclusive.   Note  that
       both  x and y must be of the same type.	When the increment is supplied, it is used as the
       difference between each term.  The default increment is 1 or -1 as appropriate.

       Brace expansion is performed before any other expansions, and any  characters  special  to
       other  expansions  are  preserved  in  the result.  It is strictly textual.  Bash does not
       apply any syntactic interpretation to the context of the expansion or the text between the
       braces.

       A  correctly-formed  brace expansion must contain unquoted opening and closing braces, and
       at least one unquoted comma or a valid sequence expression.  Any incorrectly formed  brace
       expansion is left unchanged.  A { or , may be quoted with a backslash to prevent its being
       considered part of a brace expression.  To avoid conflicts with parameter  expansion,  the
       string ${ is not considered eligible for brace expansion.

       This  construct is typically used as shorthand when the common prefix of the strings to be
       generated is longer than in the above example:

	      mkdir /usr/local/src/bash/{old,new,dist,bugs}
       or
	      chown root /usr/{ucb/{ex,edit},lib/{ex?.?*,how_ex}}

       Brace expansion introduces a slight incompatibility with historical versions  of  sh.   sh
       does not treat opening or closing braces specially when they appear as part of a word, and
       preserves them in the output.  Bash removes braces from words as a  consequence	of  brace
       expansion.  For example, a word entered to sh as file{1,2} appears identically in the out-
       put.  The same word is output as file1 file2 after expansion by bash.  If strict  compati-
       bility  with  sh is desired, start bash with the +B option or disable brace expansion with
       the +B option to the set command (see SHELL BUILTIN COMMANDS below).

   Tilde Expansion
       If a word begins with an unquoted tilde character (`~'), all of the  characters	preceding
       the first unquoted slash (or all characters, if there is no unquoted slash) are considered
       a tilde-prefix.	If none of the characters in the tilde-prefix are quoted, the  characters
       in  the	tilde-prefix  following  the tilde are treated as a possible login name.  If this
       login name is the null string, the tilde is replaced with the value of the shell parameter
       HOME.  If HOME is unset, the home directory of the user executing the shell is substituted
       instead.  Otherwise, the tilde-prefix is replaced with the home directory associated  with
       the specified login name.

       If the tilde-prefix is a `~+', the value of the shell variable PWD replaces the tilde-pre-
       fix.  If the tilde-prefix is a `~-', the value of the shell variable OLDPWD, if it is set,
       is  substituted.   If  the characters following the tilde in the tilde-prefix consist of a
       number N, optionally prefixed by a `+' or a `-', the tilde-prefix  is  replaced	with  the
       corresponding  element  from  the  directory  stack,  as it would be displayed by the dirs
       builtin invoked with the tilde-prefix as an argument.  If  the  characters  following  the
       tilde  in  the  tilde-prefix  consist  of  a  number  without a leading `+' or `-', `+' is
       assumed.

       If the login name is invalid, or the tilde expansion fails, the word is unchanged.

       Each variable assignment is checked for unquoted tilde-prefixes immediately following a	:
       or the first =.	In these cases, tilde expansion is also performed.  Consequently, one may
       use file names with tildes in assignments to PATH, MAILPATH, and  CDPATH,  and  the  shell
       assigns the expanded value.

   Parameter Expansion
       The  `$'  character  introduces	parameter  expansion, command substitution, or arithmetic
       expansion.  The parameter name or symbol to be expanded may be enclosed in  braces,  which
       are  optional but serve to protect the variable to be expanded from characters immediately
       following it which could be interpreted as part of the name.

       When braces are used, the matching ending brace is the first `}' not escaped  by  a  back-
       slash  or within a quoted string, and not within an embedded arithmetic expansion, command
       substitution, or parameter expansion.

       ${parameter}
	      The value of parameter is substituted.  The braces are required when parameter is a
	      positional  parameter  with more than one digit, or when parameter is followed by a
	      character which is not to be interpreted as part of its name.

       If the first character of parameter is an exclamation point (!), a level of variable indi-
       rection is introduced.  Bash uses the value of the variable formed from the rest of param-
       eter as the name of the variable; this variable is then expanded and that value is used in
       the rest of the substitution, rather than the value of parameter itself.  This is known as
       indirect expansion.  The  exceptions  to  this  are  the  expansions  of  ${!prefix*}  and
       ${!name[@]} described below.  The exclamation point must immediately follow the left brace
       in order to introduce indirection.

       In each of the cases below, word is subject to tilde expansion, parameter expansion,  com-
       mand substitution, and arithmetic expansion.

       When  not performing substring expansion, using the forms documented below, bash tests for
       a parameter that is unset or null.  Omitting the colon results in a test only for a param-
       eter that is unset.

       ${parameter:-word}
	      Use  Default  Values.  If parameter is unset or null, the expansion of word is sub-
	      stituted.  Otherwise, the value of parameter is substituted.
       ${parameter:=word}
	      Assign Default Values.  If parameter is unset or null, the  expansion  of  word  is
	      assigned	to  parameter.	 The  value of parameter is then substituted.  Positional
	      parameters and special parameters may not be assigned to in this way.
       ${parameter:?word}
	      Display Error if Null or Unset.  If parameter is null or unset,  the  expansion  of
	      word  (or  a message to that effect if word is not present) is written to the stan-
	      dard error and the shell, if it is not interactive, exits.  Otherwise, the value of
	      parameter is substituted.
       ${parameter:+word}
	      Use Alternate Value.  If parameter is null or unset, nothing is substituted, other-
	      wise the expansion of word is substituted.
       ${parameter:offset}
       ${parameter:offset:length}
	      Substring Expansion.  Expands to up to length characters of parameter  starting  at
	      the  character specified by offset.  If length is omitted, expands to the substring
	      of parameter starting at the character specified by offset.  length and offset  are
	      arithmetic expressions (see ARITHMETIC EVALUATION below).  If offset evaluates to a
	      number less than zero, the value is used as an offset from the end of the value  of
	      parameter.   If length evaluates to a number less than zero, and parameter is not @
	      and not an indexed or associative array, it is interpreted as an	offset	from  the
	      end of the value of parameter rather than a number of characters, and the expansion
	      is the characters between the two offsets.  If parameter is @, the result is length
	      positional  parameters  beginning at offset.  If parameter is an indexed array name
	      subscripted by @ or *, the result is the length members of the array beginning with
	      ${parameter[offset]}.   A negative offset is taken relative to one greater than the
	      maximum index of the specified array.  Substring expansion applied to  an  associa-
	      tive  array  produces undefined results.	Note that a negative offset must be sepa-
	      rated from the colon by at least one space to avoid  being  confused  with  the  :-
	      expansion.   Substring  indexing is zero-based unless the positional parameters are
	      used, in which case the indexing starts at 1 by default.	If offset is 0,  and  the
	      positional parameters are used, $0 is prefixed to the list.

       ${!prefix*}
       ${!prefix@}
	      Names  matching  prefix.	 Expands to the names of variables whose names begin with
	      prefix, separated by the first character of the IFS special variable.   When  @  is
	      used  and the expansion appears within double quotes, each variable name expands to
	      a separate word.

       ${!name[@]}
       ${!name[*]}
	      List of array keys.  If name is an array variable, expands to  the  list	of  array
	      indices  (keys) assigned in name.  If name is not an array, expands to 0 if name is
	      set and null otherwise.  When @ is used and the  expansion  appears  within  double
	      quotes, each key expands to a separate word.

       ${#parameter}
	      Parameter  length.   The	length in characters of the value of parameter is substi-
	      tuted.  If parameter is * or @, the value substituted is the number  of  positional
	      parameters.  If parameter is an array name subscripted by * or @, the value substi-
	      tuted is the number of elements in the array.

       ${parameter#word}
       ${parameter##word}
	      Remove matching prefix pattern.  The word is expanded to produce a pattern just  as
	      in pathname expansion.  If the pattern matches the beginning of the value of param-
	      eter, then the result of the expansion is the expanded value of parameter with  the
	      shortest	matching  pattern  (the  ``#'' case) or the longest matching pattern (the
	      ``##'' case) deleted.  If parameter is @ or *, the  pattern  removal  operation  is
	      applied  to  each  positional parameter in turn, and the expansion is the resultant
	      list.  If parameter is an array variable subscripted  with  @  or  *,  the  pattern
	      removal operation is applied to each member of the array in turn, and the expansion
	      is the resultant list.

       ${parameter%word}
       ${parameter%%word}
	      Remove matching suffix pattern.  The word is expanded to produce a pattern just  as
	      in  pathname  expansion.	If the pattern matches a trailing portion of the expanded
	      value of parameter, then the result of the  expansion  is  the  expanded	value  of
	      parameter with the shortest matching pattern (the ``%'' case) or the longest match-
	      ing pattern (the ``%%'' case) deleted.  If parameter is @ or *, the pattern removal
	      operation is applied to each positional parameter in turn, and the expansion is the
	      resultant list.  If parameter is an array variable subscripted with  @  or  *,  the
	      pattern  removal	operation is applied to each member of the array in turn, and the
	      expansion is the resultant list.

       ${parameter/pattern/string}
	      Pattern substitution.  The pattern is expanded to produce  a  pattern  just  as  in
	      pathname expansion.  Parameter is expanded and the longest match of pattern against
	      its value is replaced with string.  If pattern begins with /, all matches  of  pat-
	      tern are replaced with string.  Normally only the first match is replaced.  If pat-
	      tern begins with #, it must match at the beginning of the expanded value of parame-
	      ter.   If  pattern begins with %, it must match at the end of the expanded value of
	      parameter.  If string is null, matches of pattern are deleted and the  /	following
	      pattern  may  be	omitted.   If  parameter is @ or *, the substitution operation is
	      applied to each positional parameter in turn, and the expansion  is  the	resultant
	      list.   If parameter is an array variable subscripted with @ or *, the substitution
	      operation is applied to each member of the array in turn, and the expansion is  the
	      resultant list.

       ${parameter^pattern}
       ${parameter^^pattern}
       ${parameter,pattern}
       ${parameter,,pattern}
	      Case  modification.   This  expansion modifies the case of alphabetic characters in
	      parameter.  The pattern is expanded to produce a pattern just as in pathname expan-
	      sion.  The ^ operator converts lowercase letters matching pattern to uppercase; the
	      , operator converts matching uppercase letters to lowercase.  The ^^ and ,,  expan-
	      sions  convert each matched character in the expanded value; the ^ and , expansions
	      match and convert only the first character in the expanded value.   If  pattern  is
	      omitted,	it is treated like a ?, which matches every character.	If parameter is @
	      or *, the case modification operation is applied to each	positional  parameter  in
	      turn,  and  the expansion is the resultant list.	If parameter is an array variable
	      subscripted with @ or *, the case modification operation is applied to each  member
	      of the array in turn, and the expansion is the resultant list.

   Command Substitution
       Command	substitution  allows  the output of a command to replace the command name.  There
       are two forms:

	      $(command)
       or
	      `command`

       Bash performs the expansion by executing command and replacing  the  command  substitution
       with  the  standard  output  of the command, with any trailing newlines deleted.  Embedded
       newlines are not deleted, but they may be removed during word splitting.  The command sub-
       stitution $(cat file) can be replaced by the equivalent but faster $(< file).

       When  the  old-style backquote form of substitution is used, backslash retains its literal
       meaning except when followed by $, `, or \.  The first backquote not preceded by  a  back-
       slash terminates the command substitution.  When using the $(command) form, all characters
       between the parentheses make up the command; none are treated specially.

       Command substitutions may be nested.  To nest when using the backquoted form,  escape  the
       inner backquotes with backslashes.

       If  the	substitution  appears within double quotes, word splitting and pathname expansion
       are not performed on the results.

   Arithmetic Expansion
       Arithmetic expansion allows the evaluation of an arithmetic expression and  the	substitu-
       tion of the result.  The format for arithmetic expansion is:

	      $((expression))

       The  expression	is  treated as if it were within double quotes, but a double quote inside
       the parentheses is not treated specially.  All tokens in the expression undergo	parameter
       expansion,  string  expansion, command substitution, and quote removal.	Arithmetic expan-
       sions may be nested.

       The evaluation is performed according to the rules listed below under  ARITHMETIC  EVALUA-
       TION.  If expression is invalid, bash prints a message indicating failure and no substitu-
       tion occurs.

   Process Substitution
       Process substitution is supported on systems that  support  named  pipes  (FIFOs)  or  the
       /dev/fd	method	of  naming  open  files.   It  takes the form of <(list) or >(list).  The
       process list is run with its input or output connected to a FIFO or some file in  /dev/fd.
       The name of this file is passed as an argument to the current command as the result of the
       expansion.  If the >(list) form is used, writing to the file will provide input for  list.
       If  the	<(list) form is used, the file passed as an argument should be read to obtain the
       output of list.

       When available, process substitution is performed simultaneously with parameter and  vari-
       able expansion, command substitution, and arithmetic expansion.

   Word Splitting
       The  shell  scans the results of parameter expansion, command substitution, and arithmetic
       expansion that did not occur within double quotes for word splitting.

       The shell treats each character of IFS as a delimiter, and splits the results of the other
       expansions  into  words	on  these  characters.	 If IFS is unset, or its value is exactly
       <space><tab><newline>, the default, then sequences of <space>, <tab>, and <newline> at the
       beginning  and end of the results of the previous expansions are ignored, and any sequence
       of IFS characters not at the beginning or end serves to delimit words.  If IFS has a value
       other  than  the  default,  then  sequences of the whitespace characters space and tab are
       ignored at the beginning and end of the word, as long as the whitespace	character  is  in
       the  value  of  IFS  (an  IFS whitespace character).  Any character in IFS that is not IFS
       whitespace, along with any adjacent  IFS  whitespace  characters,  delimits  a  field.	A
       sequence of IFS whitespace characters is also treated as a delimiter.  If the value of IFS
       is null, no word splitting occurs.

       Explicit null arguments ("" or  '')  are  retained.   Unquoted  implicit  null  arguments,
       resulting from the expansion of parameters that have no values, are removed.  If a parame-
       ter with no value is expanded within  double  quotes,  a  null  argument  results  and  is
       retained.

       Note that if no expansion occurs, no splitting is performed.

   Pathname Expansion
       After  word  splitting,	unless	the  -f option has been set, bash scans each word for the
       characters *, ?, and [.	If one of these characters appears, then the word is regarded  as
       a pattern, and replaced with an alphabetically sorted list of file names matching the pat-
       tern.  If no matching file names are found, and the shell option nullglob is not  enabled,
       the  word is left unchanged.  If the nullglob option is set, and no matches are found, the
       word is removed.  If the failglob shell option is set, and no matches are found, an  error
       message	is  printed  and  the command is not executed.	If the shell option nocaseglob is
       enabled, the match is performed without regard to the case of alphabetic characters.  When
       a  pattern  is used for pathname expansion, the character ``.''	at the start of a name or
       immediately following a slash must be matched explicitly, unless the shell option  dotglob
       is  set.  When matching a pathname, the slash character must always be matched explicitly.
       In other cases, the ``.''  character is not treated specially.	See  the  description  of
       shopt  below  under  SHELL BUILTIN COMMANDS for a description of the nocaseglob, nullglob,
       failglob, and dotglob shell options.

       The GLOBIGNORE shell variable may be used to restrict the set of  file  names  matching	a
       pattern.   If GLOBIGNORE is set, each matching file name that also matches one of the pat-
       terns in GLOBIGNORE is removed from the list of matches.  The file names ``.''  and ``..''
       are  always ignored when GLOBIGNORE is set and not null.  However, setting GLOBIGNORE to a
       non-null value has the effect of enabling the dotglob shell  option,  so  all  other  file
       names  beginning with a ``.''  will match.  To get the old behavior of ignoring file names
       beginning with a ``.'', make ``.*''  one of  the  patterns  in  GLOBIGNORE.   The  dotglob
       option is disabled when GLOBIGNORE is unset.

       Pattern Matching

       Any  character  that  appears  in  a  pattern,  other  than the special pattern characters
       described below, matches itself.  The NUL character may not occur in a pattern.	 A  back-
       slash  escapes the following character; the escaping backslash is discarded when matching.
       The special pattern characters must be quoted if they are to be matched literally.

       The special pattern characters have the following meanings:

	      *      Matches any string, including the null  string.   When  the  globstar  shell
		     option  is enabled, and * is used in a pathname expansion context, two adja-
		     cent *s used as a single pattern will match  all  files  and  zero  or  more
		     directories  and  subdirectories.	 If followed by a /, two adjacent *s will
		     match only directories and subdirectories.
	      ?      Matches any single character.
	      [...]  Matches any one of the enclosed characters.  A pair of characters	separated
		     by  a  hyphen  denotes  a range expression; any character that sorts between
		     those two	characters,  inclusive,  using	the  current  locale's	collating
		     sequence  and  character  set, is matched.  If the first character following
		     the [ is a !  or a ^ then any character not enclosed is matched.  The  sort-
		     ing  order  of  characters in range expressions is determined by the current
		     locale and the value of the LC_COLLATE shell variable, if set.  A -  may  be
		     matched  by including it as the first or last character in the set.  A ] may
		     be matched by including it as the first character in the set.

		     Within [ and  ],  character  classes  can	be  specified  using  the  syntax
		     [:class:],  where class is one of the following classes defined in the POSIX
		     standard:
		     alnum alpha ascii blank cntrl digit graph lower print punct space upper word
		     xdigit
		     A	character  class matches any character belonging to that class.  The word
		     character class matches letters, digits, and the character _.

		     Within [ and ], an equivalence class  can	be  specified  using  the  syntax
		     [=c=],  which  matches  all  characters  with  the same collation weight (as
		     defined by the current locale) as the character c.

		     Within [ and ], the syntax [.symbol.] matches the collating symbol symbol.

       If the extglob shell option is enabled using the shopt builtin, several	extended  pattern
       matching operators are recognized.  In the following description, a pattern-list is a list
       of one or more patterns separated by a |.  Composite patterns may be formed using  one  or
       more of the following sub-patterns:

	      ?(pattern-list)
		     Matches zero or one occurrence of the given patterns
	      *(pattern-list)
		     Matches zero or more occurrences of the given patterns
	      +(pattern-list)
		     Matches one or more occurrences of the given patterns
	      @(pattern-list)
		     Matches one of the given patterns
	      !(pattern-list)
		     Matches anything except one of the given patterns

   Quote Removal
       After  the  preceding  expansions,  all unquoted occurrences of the characters \, ', and "
       that did not result from one of the above expansions are removed.

REDIRECTION
       Before a command is executed, its input and output may be redirected using a special nota-
       tion  interpreted  by the shell.  Redirection may also be used to open and close files for
       the current shell execution environment.  The following redirection operators may  precede
       or appear anywhere within a simple command or may follow a command.  Redirections are pro-
       cessed in the order they appear, from left to right.

       Each redirection that may be preceded by a file descriptor number may instead be  preceded
       by  a  word of the form {varname}.  In this case, for each redirection operator except >&-
       and <&-, the shell will allocate a file descriptor greater than 10 and assign it  to  var-
       name.   If  >&-	or  <&-  is  preceded by {varname}, the value of varname defines the file
       descriptor to close.

       In the following descriptions, if the file descriptor number is	omitted,  and  the  first
       character  of  the redirection operator is <, the redirection refers to the standard input
       (file descriptor 0).  If the first character of the redirection operator is >,  the  redi-
       rection refers to the standard output (file descriptor 1).

       The  word  following the redirection operator in the following descriptions, unless other-
       wise noted, is subjected to brace expansion, tilde expansion, parameter expansion, command
       substitution, arithmetic expansion, quote removal, pathname expansion, and word splitting.
       If it expands to more than one word, bash reports an error.

       Note that the order of redirections is significant.  For example, the command

	      ls > dirlist 2>&1

       directs both standard output and standard error to the file dirlist, while the command

	      ls 2>&1 > dirlist

       directs only the standard output to file dirlist, because the standard  error  was  dupli-
       cated from the standard output before the standard output was redirected to dirlist.

       Bash  handles several filenames specially when they are used in redirections, as described
       in the following table:

	      /dev/fd/fd
		     If fd is a valid integer, file descriptor fd is duplicated.
	      /dev/stdin
		     File descriptor 0 is duplicated.
	      /dev/stdout
		     File descriptor 1 is duplicated.
	      /dev/stderr
		     File descriptor 2 is duplicated.
	      /dev/tcp/host/port
		     If host is a valid hostname or Internet address, and port is an integer port
		     number or service name, bash attempts to open a TCP connection to the corre-
		     sponding socket.
	      /dev/udp/host/port
		     If host is a valid hostname or Internet address, and port is an integer port
		     number or service name, bash attempts to open a UDP connection to the corre-
		     sponding socket.

       A failure to open or create a file causes the redirection to fail.

       Redirections using file descriptors greater than 9 should be used with care, as	they  may
       conflict with file descriptors the shell uses internally.

   Redirecting Input
       Redirection  of	input causes the file whose name results from the expansion of word to be
       opened for reading on file descriptor n, or the standard input (file descriptor 0) if n is
       not specified.

       The general format for redirecting input is:

	      [n]<word

   Redirecting Output
       Redirection  of output causes the file whose name results from the expansion of word to be
       opened for writing on file descriptor n, or the standard output (file descriptor 1)  if	n
       is  not specified.  If the file does not exist it is created; if it does exist it is trun-
       cated to zero size.

       The general format for redirecting output is:

	      [n]>word

       If the redirection operator is >, and the noclobber option to the  set  builtin	has  been
       enabled,  the  redirection  will fail if the file whose name results from the expansion of
       word exists and is a regular file.  If the redirection operator is >|, or the  redirection
       operator  is > and the noclobber option to the set builtin command is not enabled, the re-
       direction is attempted even if the file named by word exists.

   Appending Redirected Output
       Redirection of output in this fashion causes the file whose name results from  the  expan-
       sion of word to be opened for appending on file descriptor n, or the standard output (file
       descriptor 1) if n is not specified.  If the file does not exist it is created.

       The general format for appending output is:

	      [n]>>word

   Redirecting Standard Output and Standard Error
       This construct allows both the standard output (file descriptor 1) and the standard  error
       output  (file  descriptor  2)  to be redirected to the file whose name is the expansion of
       word.

       There are two formats for redirecting standard output and standard error:

	      &>word
       and
	      >&word

       Of the two forms, the first is preferred.  This is semantically equivalent to

	      >word 2>&1

   Appending Standard Output and Standard Error
       This construct allows both the standard output (file descriptor 1) and the standard  error
       output (file descriptor 2) to be appended to the file whose name is the expansion of word.

       The format for appending standard output and standard error is:

	      &>>word

       This is semantically equivalent to

	      >>word 2>&1

   Here Documents
       This type of redirection instructs the shell to read input from the current source until a
       line containing only delimiter (with no trailing blanks) is seen.  All of the  lines  read
       up to that point are then used as the standard input for a command.

       The format of here-documents is:

	      <<[-]word
		      here-document
	      delimiter

       No  parameter expansion, command substitution, arithmetic expansion, or pathname expansion
       is performed on word.  If any characters in word are quoted, the delimiter is  the  result
       of quote removal on word, and the lines in the here-document are not expanded.  If word is
       unquoted, all lines of the here-document are subjected  to  parameter  expansion,  command
       substitution, and arithmetic expansion.	In the latter case, the character sequence \<new-
       line> is ignored, and \ must be used to quote the characters \, $, and `.

       If the redirection operator is <<-, then all leading  tab  characters  are  stripped  from
       input  lines  and  the line containing delimiter.  This allows here-documents within shell
       scripts to be indented in a natural fashion.

   Here Strings
       A variant of here documents, the format is:

	      <<<word

       The word is expanded and supplied to the command on its standard input.

   Duplicating File Descriptors
       The redirection operator

	      [n]<&word

       is used to duplicate input file descriptors.  If word expands to one or more  digits,  the
       file  descriptor denoted by n is made to be a copy of that file descriptor.  If the digits
       in word do not specify a file descriptor open for input, a redirection error  occurs.   If
       word  evaluates	to  -,	file descriptor n is closed.  If n is not specified, the standard
       input (file descriptor 0) is used.

       The operator

	      [n]>&word

       is used similarly to duplicate output file descriptors.	If n is not specified, the  stan-
       dard  output  (file  descriptor	1)  is used.  If the digits in word do not specify a file
       descriptor open for output, a redirection error occurs.	As a special case, if n is  omit-
       ted,  and  word	does  not  expand to one or more digits, the standard output and standard
       error are redirected as described previously.

   Moving File Descriptors
       The redirection operator

	      [n]<&digit-

       moves the file descriptor digit to file descriptor n, or the standard input (file descrip-
       tor 0) if n is not specified.  digit is closed after being duplicated to n.

       Similarly, the redirection operator

	      [n]>&digit-

       moves  the  file  descriptor  digit  to	file  descriptor  n, or the standard output (file
       descriptor 1) if n is not specified.

   Opening File Descriptors for Reading and Writing
       The redirection operator

	      [n]<>word

       causes the file whose name is the expansion of word to be  opened  for  both  reading  and
       writing	on file descriptor n, or on file descriptor 0 if n is not specified.  If the file
       does not exist, it is created.

ALIASES
       Aliases allow a string to be substituted for a word when it is used as the first word of a
       simple  command.  The shell maintains a list of aliases that may be set and unset with the
       alias and unalias builtin commands (see SHELL BUILTIN COMMANDS below).  The first word  of
       each  simple command, if unquoted, is checked to see if it has an alias.  If so, that word
       is replaced by the text of the alias.  The characters /, $, `, and = and any of the  shell
       metacharacters  or  quoting  characters listed above may not appear in an alias name.  The
       replacement text may contain any valid shell input, including shell  metacharacters.   The
       first  word of the replacement text is tested for aliases, but a word that is identical to
       an alias being expanded is not expanded a second time.  This means that one may	alias  ls
       to  ls -F, for instance, and bash does not try to recursively expand the replacement text.
       If the last character of the alias value is a blank, then the next command word	following
       the alias is also checked for alias expansion.

       Aliases	are  created and listed with the alias command, and removed with the unalias com-
       mand.

       There is no mechanism for using arguments in  the  replacement  text.   If  arguments  are
       needed, a shell function should be used (see FUNCTIONS below).

       Aliases	are  not  expanded  when  the shell is not interactive, unless the expand_aliases
       shell option is set using shopt (see the description of shopt under SHELL BUILTIN COMMANDS
       below).

       The  rules  concerning  the  definition	and  use of aliases are somewhat confusing.  Bash
       always reads at least one complete line of input before executing any of the  commands  on
       that  line.  Aliases are expanded when a command is read, not when it is executed.  There-
       fore, an alias definition appearing on the same line as	another  command  does	not  take
       effect  until the next line of input is read.  The commands following the alias definition
       on that line are not affected by the new alias.	This behavior is also an issue when func-
       tions are executed.  Aliases are expanded when a function definition is read, not when the
       function is executed, because a function definition is itself a compound  command.   As	a
       consequence,  aliases defined in a function are not available until after that function is
       executed.  To be safe, always put alias definitions on a separate line,	and  do  not  use
       alias in compound commands.

       For almost every purpose, aliases are superseded by shell functions.

FUNCTIONS
       A  shell function, defined as described above under SHELL GRAMMAR, stores a series of com-
       mands for later execution.  When the name of a shell function is used as a simple  command
       name,  the list of commands associated with that function name is executed.  Functions are
       executed in the context of the current shell; no new process is created to interpret  them
       (contrast  this	with  the execution of a shell script).  When a function is executed, the
       arguments to the function become the positional parameters during its execution.  The spe-
       cial parameter # is updated to reflect the change.  Special parameter 0 is unchanged.  The
       first element of the FUNCNAME variable is set to the name of the function while the  func-
       tion is executing.

       All  other aspects of the shell execution environment are identical between a function and
       its caller with these exceptions:  the DEBUG and RETURN traps (see the description of  the
       trap builtin under SHELL BUILTIN COMMANDS below) are not inherited unless the function has
       been given the trace attribute (see the description of the declare builtin below)  or  the
       -o  functrace  shell option has been enabled with the set builtin (in which case all func-
       tions inherit the DEBUG and RETURN traps), and the ERR trap is not inherited unless the -o
       errtrace shell option has been enabled.

       Variables  local to the function may be declared with the local builtin command.  Ordinar-
       ily, variables and their values are shared between the function and its caller.

       The FUNCNEST variable, if set to a numeric value greater than 0, defines a  maximum  func-
       tion  nesting  level.  Function invocations that exceed the limit cause the entire command
       to abort.

       If the builtin command return is executed in a function, the function completes and execu-
       tion  resumes  with the next command after the function call.  Any command associated with
       the RETURN trap is executed before execution resumes.  When a function completes, the val-
       ues  of	the  positional parameters and the special parameter # are restored to the values
       they had prior to the function's execution.

       Function names and definitions may be listed with the -f option to the declare or  typeset
       builtin	commands.   The -F option to declare or typeset will list the function names only
       (and optionally the source file and line number, if the extdebug shell option is enabled).
       Functions  may  be  exported so that subshells automatically have them defined with the -f
       option to the export builtin.  A function definition may be deleted using the -f option to
       the  unset builtin.  Note that shell functions and variables with the same name may result
       in multiple identically-named entries in the environment passed to the  shell's	children.
       Care should be taken in cases where this may cause a problem.

       Functions  may  be recursive.  The FUNCNEST variable may be used to limit the depth of the
       function call stack and restrict the number of function invocations.  By default, no limit
       is imposed on the number of recursive calls.

ARITHMETIC EVALUATION
       The  shell allows arithmetic expressions to be evaluated, under certain circumstances (see
       the let and declare builtin commands and Arithmetic Expansion).	 Evaluation  is  done  in
       fixed-width  integers  with  no	check  for  overflow, though division by 0 is trapped and
       flagged as an error.  The operators and their precedence, associativity,  and  values  are
       the  same as in the C language.	The following list of operators is grouped into levels of
       equal-precedence operators.  The levels are listed in order of decreasing precedence.

       id++ id--
	      variable post-increment and post-decrement
       ++id --id
	      variable pre-increment and pre-decrement
       - +    unary minus and plus
       ! ~    logical and bitwise negation
       **     exponentiation
       * / %  multiplication, division, remainder
       + -    addition, subtraction
       << >>  left and right bitwise shifts
       <= >= < >
	      comparison
       == !=  equality and inequality
       &      bitwise AND
       ^      bitwise exclusive OR
       |      bitwise OR
       &&     logical AND
       ||     logical OR
       expr?expr:expr
	      conditional operator
       = *= /= %= += -= <<= >>= &= ^= |=
	      assignment
       expr1 , expr2
	      comma

       Shell variables are allowed as operands;  parameter  expansion  is  performed  before  the
       expression  is evaluated.  Within an expression, shell variables may also be referenced by
       name without using the parameter expansion syntax.  A shell variable that is null or unset
       evaluates  to 0 when referenced by name without using the parameter expansion syntax.  The
       value of a variable is evaluated as an arithmetic expression when  it  is  referenced,  or
       when  a variable which has been given the integer attribute using declare -i is assigned a
       value.  A null value evaluates to 0.  A shell variable need not have its integer attribute
       turned on to be used in an expression.

       Constants  with	a leading 0 are interpreted as octal numbers.  A leading 0x or 0X denotes
       hexadecimal.  Otherwise, numbers take the form [base#]n, where the optional base is a dec-
       imal  number  between 2 and 64 representing the arithmetic base, and n is a number in that
       base.  If base# is omitted, then base 10 is used.  The digits greater than  9  are  repre-
       sented  by the lowercase letters, the uppercase letters, @, and _, in that order.  If base
       is less than or equal to 36, lowercase and uppercase letters may be  used  interchangeably
       to represent numbers between 10 and 35.

       Operators are evaluated in order of precedence.	Sub-expressions in parentheses are evalu-
       ated first and may override the precedence rules above.

CONDITIONAL EXPRESSIONS
       Conditional expressions are used by the [[ compound command and the  test  and  [  builtin
       commands  to  test file attributes and perform string and arithmetic comparisons.  Expres-
       sions are formed from the following unary or binary primaries.  If any  file  argument  to
       one  of the primaries is of the form /dev/fd/n, then file descriptor n is checked.  If the
       file argument to one of the primaries is one of /dev/stdin, /dev/stdout,  or  /dev/stderr,
       file descriptor 0, 1, or 2, respectively, is checked.

       Unless  otherwise  specified,  primaries  that  operate on files follow symbolic links and
       operate on the target of the link, rather than the link itself.

       When used with [[, the < and > operators sort lexicographically using the current  locale.
       The test command sorts using ASCII ordering.

       -a file
	      True if file exists.
       -b file
	      True if file exists and is a block special file.
       -c file
	      True if file exists and is a character special file.
       -d file
	      True if file exists and is a directory.
       -e file
	      True if file exists.
       -f file
	      True if file exists and is a regular file.
       -g file
	      True if file exists and is set-group-id.
       -h file
	      True if file exists and is a symbolic link.
       -k file
	      True if file exists and its ``sticky'' bit is set.
       -p file
	      True if file exists and is a named pipe (FIFO).
       -r file
	      True if file exists and is readable.
       -s file
	      True if file exists and has a size greater than zero.
       -t fd  True if file descriptor fd is open and refers to a terminal.
       -u file
	      True if file exists and its set-user-id bit is set.
       -w file
	      True if file exists and is writable.
       -x file
	      True if file exists and is executable.
       -G file
	      True if file exists and is owned by the effective group id.
       -L file
	      True if file exists and is a symbolic link.
       -N file
	      True if file exists and has been modified since it was last read.
       -O file
	      True if file exists and is owned by the effective user id.
       -S file
	      True if file exists and is a socket.
       file1 -ef file2
	      True if file1 and file2 refer to the same device and inode numbers.
       file1 -nt file2
	      True  if	file1  is  newer (according to modification date) than file2, or if file1
	      exists and file2 does not.
       file1 -ot file2
	      True if file1 is older than file2, or if file2 exists and file1 does not.
       -o optname
	      True if the shell option optname is enabled.  See the list  of  options  under  the
	      description of the -o option to the set builtin below.
       -v varname
	      True if the shell variable varname is set (has been assigned a value).
       -z string
	      True if the length of string is zero.
       string
       -n string
	      True if the length of string is non-zero.

       string1 == string2
       string1 = string2
	      True  if	the  strings are equal.  = should be used with the test command for POSIX
	      conformance.

       string1 != string2
	      True if the strings are not equal.

       string1 < string2
	      True if string1 sorts before string2 lexicographically.

       string1 > string2
	      True if string1 sorts after string2 lexicographically.

       arg1 OP arg2
	      OP is one of -eq, -ne, -lt, -le, -gt, or -ge.  These  arithmetic	binary	operators
	      return  true  if	arg1 is equal to, not equal to, less than, less than or equal to,
	      greater than, or greater than or equal to arg2, respectively.  Arg1 and arg2 may be
	      positive or negative integers.

SIMPLE COMMAND EXPANSION
       When  a	simple	command is executed, the shell performs the following expansions, assign-
       ments, and redirections, from left to right.

       1.     The words that the parser has marked as variable assignments (those  preceding  the
	      command name) and redirections are saved for later processing.

       2.     The  words  that are not variable assignments or redirections are expanded.  If any
	      words remain after expansion, the first word is taken to be the name of the command
	      and the remaining words are the arguments.

       3.     Redirections are performed as described above under REDIRECTION.

       4.     The text after the = in each variable assignment undergoes tilde expansion, parame-
	      ter expansion, command substitution, arithmetic expansion, and quote removal before
	      being assigned to the variable.

       If no command name results, the variable assignments affect the current shell environment.
       Otherwise, the variables are added to the environment of the executed command and  do  not
       affect  the  current  shell  environment.   If any of the assignments attempts to assign a
       value to a readonly variable, an error occurs, and the command exits with a non-zero  sta-
       tus.

       If  no  command	name  results,	redirections are performed, but do not affect the current
       shell environment.  A redirection error causes the command to exit with a non-zero status.

       If there is a command name left after expansion, execution proceeds  as	described  below.
       Otherwise,  the command exits.  If one of the expansions contained a command substitution,
       the exit status of the command is the exit status of the last  command  substitution  per-
       formed.	If there were no command substitutions, the command exits with a status of zero.

COMMAND EXECUTION
       After  a  command  has  been  split  into  words, if it results in a simple command and an
       optional list of arguments, the following actions are taken.

       If the command name contains no slashes, the shell attempts to locate it.  If there exists
       a  shell  function by that name, that function is invoked as described above in FUNCTIONS.
       If the name does not match a function, the shell searches for it  in  the  list	of  shell
       builtins.  If a match is found, that builtin is invoked.

       If  the	name  is  neither  a  shell function nor a builtin, and contains no slashes, bash
       searches each element of the PATH for a directory containing an executable  file  by  that
       name.  Bash uses a hash table to remember the full pathnames of executable files (see hash
       under SHELL BUILTIN COMMANDS below).  A full search of the directories  in  PATH  is  per-
       formed only if the command is not found in the hash table.  If the search is unsuccessful,
       the shell searches for a defined shell function named command_not_found_handle.	 If  that
       function  exists, it is invoked with the original command and the original command's argu-
       ments as its arguments, and the function's exit status becomes  the  exit  status  of  the
       shell.	If that function is not defined, the shell prints an error message and returns an
       exit status of 127.

       If the search is successful, or if the command name contains  one  or  more  slashes,  the
       shell  executes	the named program in a separate execution environment.	Argument 0 is set
       to the name given, and the remaining arguments to the command are  set  to  the	arguments
       given, if any.

       If  this execution fails because the file is not in executable format, and the file is not
       a directory, it is assumed to be a shell script, a file containing shell commands.  A sub-
       shell is spawned to execute it.	This subshell reinitializes itself, so that the effect is
       as if a new shell had been invoked to handle the script, with the exception that the loca-
       tions  of  commands remembered by the parent (see hash below under SHELL BUILTIN COMMANDS)
       are retained by the child.

       If the program is a file beginning with #!, the remainder of the first line  specifies  an
       interpreter  for  the  program.	The shell executes the specified interpreter on operating
       systems that do not handle this executable format themselves.  The arguments to the inter-
       preter  consist	of a single optional argument following the interpreter name on the first
       line of the program, followed by the name of the program, followed by  the  command  argu-
       ments, if any.

COMMAND EXECUTION ENVIRONMENT
       The shell has an execution environment, which consists of the following:

       o      open  files  inherited by the shell at invocation, as modified by redirections sup-
	      plied to the exec builtin

       o      the current working directory as set by cd, pushd, or popd,  or  inherited  by  the
	      shell at invocation

       o      the file creation mode mask as set by umask or inherited from the shell's parent

       o      current traps set by trap

       o      shell  parameters that are set by variable assignment or with set or inherited from
	      the shell's parent in the environment

       o      shell functions defined during execution or inherited from the  shell's  parent  in
	      the environment

       o      options enabled at invocation (either by default or with command-line arguments) or
	      by set

       o      options enabled by shopt

       o      shell aliases defined with alias

       o      various process IDs, including those of background jobs, the value of $$,  and  the
	      value of PPID

       When  a	simple	command  other	than a builtin or shell function is to be executed, it is
       invoked in a separate execution environment that consists of the following.  Unless other-
       wise noted, the values are inherited from the shell.

       o      the  shell's open files, plus any modifications and additions specified by redirec-
	      tions to the command

       o      the current working directory

       o      the file creation mode mask

       o      shell variables and functions marked for export, along with variables exported  for
	      the command, passed in the environment

       o      traps  caught  by the shell are reset to the values inherited from the shell's par-
	      ent, and traps ignored by the shell are ignored

       A command invoked in this separate environment cannot affect the shell's  execution  envi-
       ronment.

       Command	substitution,  commands  grouped  with parentheses, and asynchronous commands are
       invoked in a subshell environment that is a duplicate of  the  shell  environment,  except
       that  traps  caught by the shell are reset to the values that the shell inherited from its
       parent at invocation.  Builtin commands that are invoked as part of a  pipeline	are  also
       executed  in  a	subshell  environment.	 Changes  made to the subshell environment cannot
       affect the shell's execution environment.

       Subshells spawned to execute command substitutions inherit the value of the -e option from
       the parent shell.  When not in posix mode, bash clears the -e option in such subshells.

       If  a command is followed by a & and job control is not active, the default standard input
       for the command is the empty file /dev/null.  Otherwise, the invoked command inherits  the
       file descriptors of the calling shell as modified by redirections.

ENVIRONMENT
       When a program is invoked it is given an array of strings called the environment.  This is
       a list of name-value pairs, of the form name=value.

       The shell provides several ways to manipulate the environment.  On invocation,  the  shell
       scans its own environment and creates a parameter for each name found, automatically mark-
       ing it for export to child processes.  Executed commands  inherit  the  environment.   The
       export  and  declare -x commands allow parameters and functions to be added to and deleted
       from the environment.  If the value of a parameter in the environment is modified, the new
       value  becomes  part  of the environment, replacing the old.  The environment inherited by
       any executed command consists of the shell's initial environment, whose values may be mod-
       ified  in  the  shell, less any pairs removed by the unset command, plus any additions via
       the export and declare -x commands.

       The environment for any simple command or function may be augmented temporarily by prefix-
       ing  it	with  parameter  assignments, as described above in PARAMETERS.  These assignment
       statements affect only the environment seen by that command.

       If the -k option is set (see the set builtin command below), then  all  parameter  assign-
       ments are placed in the environment for a command, not just those that precede the command
       name.

       When bash invokes an external command, the variable _ is set to the full file name of  the
       command and passed to that command in its environment.

EXIT STATUS
       The exit status of an executed command is the value returned by the waitpid system call or
       equivalent function.  Exit statuses fall between 0 and 255, though,  as	explained  below,
       the  shell may use values above 125 specially.  Exit statuses from shell builtins and com-
       pound commands are also limited to this range. Under certain circumstances, the shell will
       use special values to indicate specific failure modes.

       For the shell's purposes, a command which exits with a zero exit status has succeeded.  An
       exit status of zero indicates success.  A non-zero exit status indicates failure.  When	a
       command terminates on a fatal signal N, bash uses the value of 128+N as the exit status.

       If  a  command  is  not found, the child process created to execute it returns a status of
       127.  If a command is found but is not executable, the return status is 126.

       If a command fails because of an error during expansion or redirection, the exit status is
       greater than zero.

       Shell  builtin commands return a status of 0 (true) if successful, and non-zero (false) if
       an error occurs while they execute.  All builtins return an exit status of 2  to  indicate
       incorrect usage.

       Bash  itself  returns  the exit status of the last command executed, unless a syntax error
       occurs, in which case it exits with a non-zero value.  See also the exit  builtin  command
       below.

SIGNALS
       When  bash is interactive, in the absence of any traps, it ignores SIGTERM (so that kill 0
       does not kill an interactive shell), and SIGINT is caught and handled (so  that	the  wait
       builtin	is  interruptible).   In  all  cases, bash ignores SIGQUIT.  If job control is in
       effect, bash ignores SIGTTIN, SIGTTOU, and SIGTSTP.

       Non-builtin commands run by bash have signal handlers set to the values inherited  by  the
       shell  from  its  parent.  When job control is not in effect, asynchronous commands ignore
       SIGINT and SIGQUIT in addition to these inherited handlers.  Commands run as a  result  of
       command	substitution  ignore the keyboard-generated job control signals SIGTTIN, SIGTTOU,
       and SIGTSTP.

       The shell exits by default upon receipt of a SIGHUP.  Before exiting, an interactive shell
       resends	the  SIGHUP  to  all  jobs, running or stopped.  Stopped jobs are sent SIGCONT to
       ensure that they receive the SIGHUP.  To prevent the shell from sending the  signal  to	a
       particular  job,  it  should  be  removed from the jobs table with the disown builtin (see
       SHELL BUILTIN COMMANDS below) or marked to not receive SIGHUP using disown -h.

       If the huponexit shell option has been set with shopt, bash sends a  SIGHUP  to	all  jobs
       when an interactive login shell exits.

       If  bash  is  waiting for a command to complete and receives a signal for which a trap has
       been set, the trap will not be executed until the command completes.  When bash is waiting
       for  an	asynchronous  command via the wait builtin, the reception of a signal for which a
       trap has been set will cause the wait builtin to return immediately with  an  exit  status
       greater than 128, immediately after which the trap is executed.

JOB CONTROL
       Job control refers to the ability to selectively stop (suspend) the execution of processes
       and continue (resume) their execution at a later point.	A  user  typically  employs  this
       facility  via  an  interactive interface supplied jointly by the operating system kernel's
       terminal driver and bash.

       The shell associates a job with each pipeline.  It keeps a table  of  currently	executing
       jobs,  which  may  be listed with the jobs command.  When bash starts a job asynchronously
       (in the background), it prints a line that looks like:

	      [1] 25647

       indicating that this job is job number 1 and that the process ID of the	last  process  in
       the pipeline associated with this job is 25647.	All of the processes in a single pipeline
       are members of the same job.  Bash uses the job abstraction as the basis for job control.

       To facilitate the implementation of the user interface to job control, the operating  sys-
       tem  maintains the notion of a current terminal process group ID.  Members of this process
       group (processes whose process group ID is equal to the current terminal process group ID)
       receive	keyboard-generated signals such as SIGINT.  These processes are said to be in the
       foreground.  Background processes are those whose process group ID differs from the termi-
       nal's; such processes are immune to keyboard-generated signals.	Only foreground processes
       are allowed to read from or, if the user so specifies with stty tostop, write to the  ter-
       minal.	Background  processes which attempt to read from (write to when stty tostop is in
       effect) the terminal are sent a SIGTTIN (SIGTTOU) signal by the kernel's terminal  driver,
       which, unless caught, suspends the process.

       If  the	operating  system  on  which  bash is running supports job control, bash contains
       facilities to use it.  Typing the suspend character  (typically	^Z,  Control-Z)  while	a
       process	is running causes that process to be stopped and returns control to bash.  Typing
       the delayed suspend character (typically ^Y, Control-Y) causes the process to  be  stopped
       when it attempts to read input from the terminal, and control to be returned to bash.  The
       user may then manipulate the state of this job, using the bg command to continue it in the
       background,  the  fg command to continue it in the foreground, or the kill command to kill
       it.  A ^Z takes effect immediately, and has the additional side effect of causing  pending
       output and typeahead to be discarded.

       There  are  a number of ways to refer to a job in the shell.  The character % introduces a
       job specification (jobspec).  Job number n may be referred to as %n.  A job  may  also  be
       referred to using a prefix of the name used to start it, or using a substring that appears
       in its command line.  For example, %ce refers to a stopped ce job.  If  a  prefix  matches
       more  than  one	job, bash reports an error.  Using %?ce, on the other hand, refers to any
       job containing the string ce in its command line.  If the substring matches more than  one
       job, bash reports an error.  The symbols %% and %+ refer to the shell's notion of the cur-
       rent job, which is the last job stopped while it was in the foreground or started  in  the
       background.   The previous job may be referenced using %-.  If there is only a single job,
       %+ and %- can both be used to refer to that job.  In output pertaining to jobs (e.g.,  the
       output  of the jobs command), the current job is always flagged with a +, and the previous
       job with a -.  A single % (with no accompanying job specification) also refers to the cur-
       rent job.

       Simply  naming a job can be used to bring it into the foreground: %1 is a synonym for ``fg
       %1'', bringing job 1 from the background into the foreground.  Similarly, ``%1 &'' resumes
       job 1 in the background, equivalent to ``bg %1''.

       The  shell learns immediately whenever a job changes state.  Normally, bash waits until it
       is about to print a prompt before reporting changes in a job's status so as to not  inter-
       rupt  any  other  output.   If  the  -b option to the set builtin command is enabled, bash
       reports such changes immediately.  Any trap on SIGCHLD is executed  for	each  child  that
       exits.

       If  an  attempt	to  exit  bash is made while jobs are stopped (or, if the checkjobs shell
       option has been enabled using the shopt builtin, running), the shell prints a warning mes-
       sage,  and,  if	the  checkjobs option is enabled, lists the jobs and their statuses.  The
       jobs command may then be used to inspect their status.  If a second  attempt  to  exit  is
       made  without  an  intervening  command, the shell does not print another warning, and any
       stopped jobs are terminated.

PROMPTING
       When executing interactively, bash displays the primary prompt PS1 when	it  is	ready  to
       read  a	command, and the secondary prompt PS2 when it needs more input to complete a com-
       mand.  Bash allows these prompt strings to be customized by inserting a	number	of  back-
       slash-escaped special characters that are decoded as follows:
	      \a     an ASCII bell character (07)
	      \d     the date in "Weekday Month Date" format (e.g., "Tue May 26")
	      \D{format}
		     the  format  is  passed  to  strftime(3) and the result is inserted into the
		     prompt string; an empty format results in a locale-specific time representa-
		     tion.  The braces are required
	      \e     an ASCII escape character (033)
	      \h     the hostname up to the first `.'
	      \H     the hostname
	      \j     the number of jobs currently managed by the shell
	      \l     the basename of the shell's terminal device name
	      \n     newline
	      \r     carriage return
	      \s     the  name	of the shell, the basename of $0 (the portion following the final
		     slash)
	      \t     the current time in 24-hour HH:MM:SS format
	      \T     the current time in 12-hour HH:MM:SS format
	      \@     the current time in 12-hour am/pm format
	      \A     the current time in 24-hour HH:MM format
	      \u     the username of the current user
	      \v     the version of bash (e.g., 2.00)
	      \V     the release of bash, version + patch level (e.g., 2.00.0)
	      \w     the current working directory, with $HOME abbreviated with a tilde (uses the
		     value of the PROMPT_DIRTRIM variable)
	      \W     the basename of the current working directory, with $HOME abbreviated with a
		     tilde
	      \!     the history number of this command
	      \#     the command number of this command
	      \$     if the effective UID is 0, a #, otherwise a $
	      \nnn   the character corresponding to the octal number nnn
	      \\     a backslash
	      \[     begin a sequence of non-printing characters, which could be used to embed	a
		     terminal control sequence into the prompt
	      \]     end a sequence of non-printing characters

       The  command  number and the history number are usually different: the history number of a
       command is its position in the history list, which may include commands restored from  the
       history file (see HISTORY below), while the command number is the position in the sequence
       of commands executed during the current shell session.  After the string is decoded, it is
       expanded  via  parameter  expansion, command substitution, arithmetic expansion, and quote
       removal, subject to the value of the promptvars shell option (see the description  of  the
       shopt command under SHELL BUILTIN COMMANDS below).

READLINE
       This is the library that handles reading input when using an interactive shell, unless the
       --noediting option is given at shell invocation.  Line editing is also used when using the
       -e option to the read builtin.  By default, the line editing commands are similar to those
       of Emacs.  A vi-style line editing interface is	also  available.   Line  editing  can  be
       enabled	at  any  time  using  the -o emacs or -o vi options to the set builtin (see SHELL
       BUILTIN COMMANDS below).  To turn off line editing after the shell is running, use the  +o
       emacs or +o vi options to the set builtin.

   Readline Notation
       In  this section, the Emacs-style notation is used to denote keystrokes.  Control keys are
       denoted by C-key, e.g., C-n means Control-N.  Similarly, meta keys are denoted  by  M-key,
       so  M-x	means Meta-X.  (On keyboards without a meta key, M-x means ESC x, i.e., press the
       Escape key then the x key.  This makes ESC the meta prefix.  The combination  M-C-x  means
       ESC-Control-x,  or  press  the  Escape  key then hold the Control key while pressing the x
       key.)

       Readline commands may be given numeric arguments, which normally act as	a  repeat  count.
       Sometimes,  however,  it is the sign of the argument that is significant.  Passing a nega-
       tive argument to a command that acts in the forward  direction  (e.g.,  kill-line)  causes
       that command to act in a backward direction.  Commands whose behavior with arguments devi-
       ates from this are noted below.

       When a command is described as killing text, the text deleted is saved for possible future
       retrieval  (yanking).   The  killed text is saved in a kill ring.  Consecutive kills cause
       the text to be accumulated into one unit, which can be yanked all at once.  Commands which
       do not kill text separate the chunks of text on the kill ring.

   Readline Initialization
       Readline  is  customized by putting commands in an initialization file (the inputrc file).
       The name of this file is taken from the value of the INPUTRC variable.  If  that  variable
       is  unset,  the	default  is  ~/.inputrc.   When a program which uses the readline library
       starts up, the initialization file is read, and the key bindings and  variables	are  set.
       There  are only a few basic constructs allowed in the readline initialization file.  Blank
       lines are ignored.  Lines beginning with a # are comments.  Lines beginning with a $ indi-
       cate conditional constructs.  Other lines denote key bindings and variable settings.

       The  default  key-bindings  may	be changed with an inputrc file.  Other programs that use
       this library may add their own commands and bindings.

       For example, placing

	      M-Control-u: universal-argument
       or
	      C-Meta-u: universal-argument
       into the inputrc would make M-C-u execute the readline command universal-argument.

       The following symbolic character names are recognized: RUBOUT,  DEL,  ESC,  LFD,  NEWLINE,
       RET, RETURN, SPC, SPACE, and TAB.

       In  addition  to  command  names,  readline  allows  keys  to be bound to a string that is
       inserted when the key is pressed (a macro).

   Readline Key Bindings
       The syntax for controlling key bindings in the  inputrc	file  is  simple.   All  that  is
       required  is the name of the command or the text of a macro and a key sequence to which it
       should be bound. The name may be specified in one of two ways: as  a  symbolic  key  name,
       possibly with Meta- or Control- prefixes, or as a key sequence.

       When  using  the form keyname:function-name or macro, keyname is the name of a key spelled
       out in English.	For example:

	      Control-u: universal-argument
	      Meta-Rubout: backward-kill-word
	      Control-o: "> output"

       In the above example, C-u is bound to the function universal-argument, M-DEL is	bound  to
       the  function backward-kill-word, and C-o is bound to run the macro expressed on the right
       hand side (that is, to insert the text ``> output'' into the line).

       In the second form, "keyseq":function-name or macro, keyseq differs from keyname above  in
       that  strings  denoting	an  entire  key sequence may be specified by placing the sequence
       within double quotes.  Some GNU Emacs style key escapes can be used, as in  the	following
       example, but the symbolic character names are not recognized.

	      "\C-u": universal-argument
	      "\C-x\C-r": re-read-init-file
	      "\e[11~": "Function Key 1"

       In  this example, C-u is again bound to the function universal-argument.  C-x C-r is bound
       to the function re-read-init-file, and ESC [ 1 1 ~ is bound to insert the text  ``Function
       Key 1''.

       The full set of GNU Emacs style escape sequences is
	      \C-    control prefix
	      \M-    meta prefix
	      \e     an escape character
	      \\     backslash
	      \"     literal "
	      \'     literal '

       In  addition to the GNU Emacs style escape sequences, a second set of backslash escapes is
       available:
	      \a     alert (bell)
	      \b     backspace
	      \d     delete
	      \f     form feed
	      \n     newline
	      \r     carriage return
	      \t     horizontal tab
	      \v     vertical tab
	      \nnn   the eight-bit character whose value is the octal value  nnn  (one	to  three
		     digits)
	      \xHH   the  eight-bit character whose value is the hexadecimal value HH (one or two
		     hex digits)

       When entering the text of a macro, single or double quotes must	be  used  to  indicate	a
       macro definition.  Unquoted text is assumed to be a function name.  In the macro body, the
       backslash escapes described above are expanded.	Backslash will quote any other	character
       in the macro text, including " and '.

       Bash  allows  the  current readline key bindings to be displayed or modified with the bind
       builtin command.  The editing mode may be switched during interactive use by using the  -o
       option to the set builtin command (see SHELL BUILTIN COMMANDS below).

   Readline Variables
       Readline has variables that can be used to further customize its behavior.  A variable may
       be set in the inputrc file with a statement of the form

	      set variable-name value

       Except where noted, readline variables can take the values On or Off  (without  regard  to
       case).	Unrecognized variable names are ignored.  When a variable value is read, empty or
       null values, "on" (case-insensitive), and "1" are equivalent to On.  All other values  are
       equivalent to Off.  The variables and their default values are:

       bell-style (audible)
	      Controls	what  happens  when  readline wants to ring the terminal bell.	If set to
	      none, readline never rings the bell.  If set to visible, readline  uses  a  visible
	      bell  if one is available.  If set to audible, readline attempts to ring the termi-
	      nal's bell.
       bind-tty-special-chars (On)
	      If set to On, readline attempts to bind the control characters treated specially by
	      the kernel's terminal driver to their readline equivalents.
       comment-begin (``#'')
	      The  string  that is inserted when the readline insert-comment command is executed.
	      This command is bound to M-# in emacs mode and to # in vi command mode.
       completion-ignore-case (Off)
	      If set to On, readline performs filename matching and completion in a case-insensi-
	      tive fashion.
       completion-prefix-display-length (0)
	      The  length  in  characters  of the common prefix of a list of possible completions
	      that is displayed without modification.  When set to a  value  greater  than  zero,
	      common  prefixes longer than this value are replaced with an ellipsis when display-
	      ing possible completions.
       completion-query-items (100)
	      This determines when the user is queried about viewing the number of possible  com-
	      pletions generated by the possible-completions command.  It may be set to any inte-
	      ger value greater than or equal to zero.	If the number of possible completions  is
	      greater  than  or equal to the value of this variable, the user is asked whether or
	      not he wishes to view them; otherwise they are simply listed on the terminal.
       convert-meta (On)
	      If set to On, readline will convert characters with the eighth bit set to an  ASCII
	      key  sequence  by  stripping  the  eighth bit and prefixing an escape character (in
	      effect, using escape as the meta prefix).
       disable-completion (Off)
	      If set to On, readline will inhibit word completion.  Completion characters will be
	      inserted into the line as if they had been mapped to self-insert.
       editing-mode (emacs)
	      Controls whether readline begins with a set of key bindings similar to Emacs or vi.
	      editing-mode can be set to either emacs or vi.
       echo-control-characters (On)
	      When set to On, on operating systems that indicate they support it, readline echoes
	      a character corresponding to a signal generated from the keyboard.
       enable-keypad (Off)
	      When  set  to  On,  readline  will  try to enable the application keypad when it is
	      called.  Some systems need this to enable the arrow keys.
       enable-meta-key (On)
	      When set to On, readline will try to enable any  meta  modifier  key  the  terminal
	      claims  to  support  when it is called.  On many terminals, the meta key is used to
	      send eight-bit characters.
       expand-tilde (Off)
	      If set to On, tilde expansion is performed when readline attempts word completion.
       history-preserve-point (Off)
	      If set to On, the history code attempts to place point at the same location on each
	      history line retrieved with previous-history or next-history.
       history-size (0)
	      Set  the	maximum  number  of history entries saved in the history list.	If set to
	      zero, the number of entries in the history list is not limited.
       horizontal-scroll-mode (Off)
	      When set to On, makes readline use a single line for display, scrolling  the  input
	      horizontally  on	a single screen line when it becomes longer than the screen width
	      rather than wrapping to a new line.
       input-meta (Off)
	      If set to On, readline will enable eight-bit input (that is, it will not strip  the
	      high  bit  from the characters it reads), regardless of what the terminal claims it
	      can support.  The name meta-flag is a synonym for this variable.
       isearch-terminators (``C-[C-J'')
	      The string of characters that should terminate an incremental search without subse-
	      quently  executing the character as a command.  If this variable has not been given
	      a value, the characters ESC and C-J will terminate an incremental search.
       keymap (emacs)
	      Set the current  readline  keymap.   The	set  of  valid	keymap	names  is  emacs,
	      emacs-standard,  emacs-meta,  emacs-ctlx,  vi,  vi-command,  and	vi-insert.  vi is
	      equivalent to vi-command; emacs is equivalent to emacs-standard.	The default value
	      is emacs; the value of editing-mode also affects the default keymap.
       mark-directories (On)
	      If set to On, completed directory names have a slash appended.
       mark-modified-lines (Off)
	      If  set to On, history lines that have been modified are displayed with a preceding
	      asterisk (*).
       mark-symlinked-directories (Off)
	      If set to On, completed names which are symbolic links to directories have a  slash
	      appended (subject to the value of mark-directories).
       match-hidden-files (On)
	      This  variable,  when  set  to On, causes readline to match files whose names begin
	      with a `.' (hidden files) when performing filename completion.  If set to Off,  the
	      leading `.' must be supplied by the user in the filename to be completed.
       menu-complete-display-prefix (Off)
	      If  set  to  On, menu completion displays the common prefix of the list of possible
	      completions (which may be empty) before cycling through the list.
       output-meta (Off)
	      If set to On, readline will display characters with the  eighth  bit  set  directly
	      rather than as a meta-prefixed escape sequence.
       page-completions (On)
	      If  set  to On, readline uses an internal more-like pager to display a screenful of
	      possible completions at a time.
       print-completions-horizontally (Off)
	      If set to On, readline will display completions with matches sorted horizontally in
	      alphabetical order, rather than down the screen.
       revert-all-at-newline (Off)
	      If set to On, readline will undo all changes to history lines before returning when
	      accept-line is executed.	By default, history lines  may	be  modified  and  retain
	      individual undo lists across calls to readline.
       show-all-if-ambiguous (Off)
	      This  alters the default behavior of the completion functions.  If set to On, words
	      which have more than one possible completion cause the matches to be listed immedi-
	      ately instead of ringing the bell.
       show-all-if-unmodified (Off)
	      This  alters  the default behavior of the completion functions in a fashion similar
	      to show-all-if-ambiguous.  If set to On, words which have more  than  one  possible
	      completion  without any possible partial completion (the possible completions don't
	      share a common prefix) cause the matches to be listed immediately instead of  ring-
	      ing the bell.
       skip-completed-text (Off)
	      If  set  to On, this alters the default completion behavior when inserting a single
	      match into the line.  It's only active when performing completion in the middle  of
	      a  word.	 If enabled, readline does not insert characters from the completion that
	      match characters after point in the word being completed, so portions of	the  word
	      following the cursor are not duplicated.
       visible-stats (Off)
	      If set to On, a character denoting a file's type as reported by stat(2) is appended
	      to the filename when listing possible completions.

   Readline Conditional Constructs
       Readline implements a facility similar in spirit to the conditional  compilation  features
       of  the	C preprocessor which allows key bindings and variable settings to be performed as
       the result of tests.  There are four parser directives used.

       $if    The $if construct allows bindings to be made based on the editing mode, the  termi-
	      nal being used, or the application using readline.  The text of the test extends to
	      the end of the line; no characters are required to isolate it.

	      mode   The mode= form of the $if directive is used to test whether readline  is  in
		     emacs  or vi mode.  This may be used in conjunction with the set keymap com-
		     mand, for instance, to set bindings in  the  emacs-standard  and  emacs-ctlx
		     keymaps only if readline is starting out in emacs mode.

	      term   The  term=  form may be used to include terminal-specific key bindings, per-
		     haps to bind the key sequences output by the terminal's function keys.   The
		     word  on the right side of the = is tested against the both full name of the
		     terminal and the portion of the terminal name  before  the  first	-.   This
		     allows sun to match both sun and sun-cmd, for instance.

	      application
		     The  application construct is used to include application-specific settings.
		     Each program using the readline library sets the application  name,  and  an
		     initialization  file can test for a particular value.  This could be used to
		     bind key  sequences  to  functions  useful  for  a  specific  program.   For
		     instance,	the following command adds a key sequence that quotes the current
		     or previous word in bash:

		     $if Bash
		     # Quote the current or previous word
		     "\C-xq": "\eb\"\ef\""
		     $endif

       $endif This command, as seen in the previous example, terminates an $if command.

       $else  Commands in this branch of the $if directive are executed if the test fails.

       $include
	      This directive takes a single filename as an argument and reads commands and  bind-
	      ings from that file.  For example, the following directive would read /etc/inputrc:

	      $include	/etc/inputrc

   Searching
       Readline  provides  commands for searching through the command history (see HISTORY below)
       for lines containing a specified string.  There are two search modes: incremental and non-
       incremental.

       Incremental searches begin before the user has finished typing the search string.  As each
       character of the search string is typed, readline displays the next entry from the history
       matching  the string typed so far.  An incremental search requires only as many characters
       as needed to find the desired history entry.  The characters present in the value  of  the
       isearch-terminators  variable  are used to terminate an incremental search.  If that vari-
       able has not been assigned a value the Escape and Control-J characters will  terminate  an
       incremental  search.   Control-G will abort an incremental search and restore the original
       line.  When the search is terminated, the  history  entry  containing  the  search  string
       becomes the current line.

       To  find other matching entries in the history list, type Control-S or Control-R as appro-
       priate.	This will search backward or forward in the history for the next  entry  matching
       the  search  string typed so far.  Any other key sequence bound to a readline command will
       terminate the search and execute that command.  For instance, a newline will terminate the
       search and accept the line, thereby executing the command from the history list.

       Readline  remembers the last incremental search string.	If two Control-Rs are typed with-
       out any intervening characters defining a new search string, any remembered search  string
       is used.

       Non-incremental	searches  read	the  entire  search  string before starting to search for
       matching history lines.	The search string may be typed by the user or be part of the con-
       tents of the current line.

   Readline Command Names
       The  following  is  a  list  of the names of the commands and the default key sequences to
       which they are bound.  Command names without an accompanying key sequence are  unbound  by
       default.   In the following descriptions, point refers to the current cursor position, and
       mark refers to a cursor position saved by the set-mark  command.   The  text  between  the
       point and mark is referred to as the region.

   Commands for Moving
       beginning-of-line (C-a)
	      Move to the start of the current line.
       end-of-line (C-e)
	      Move to the end of the line.
       forward-char (C-f)
	      Move forward a character.
       backward-char (C-b)
	      Move back a character.
       forward-word (M-f)
	      Move forward to the end of the next word.  Words are composed of alphanumeric char-
	      acters (letters and digits).
       backward-word (M-b)
	      Move back to the start of the current or previous  word.	 Words	are  composed  of
	      alphanumeric characters (letters and digits).
       shell-forward-word
	      Move  forward to the end of the next word.  Words are delimited by non-quoted shell
	      metacharacters.
       shell-backward-word
	      Move back to the start of the current or previous word.	Words  are  delimited  by
	      non-quoted shell metacharacters.
       clear-screen (C-l)
	      Clear  the screen leaving the current line at the top of the screen.  With an argu-
	      ment, refresh the current line without clearing the screen.
       redraw-current-line
	      Refresh the current line.

   Commands for Manipulating the History
       accept-line (Newline, Return)
	      Accept the line regardless of where the cursor is.  If this line is non-empty,  add
	      it  to the history list according to the state of the HISTCONTROL variable.  If the
	      line is a modified history line, then restore the  history  line	to  its  original
	      state.
       previous-history (C-p)
	      Fetch the previous command from the history list, moving back in the list.
       next-history (C-n)
	      Fetch the next command from the history list, moving forward in the list.
       beginning-of-history (M-<)
	      Move to the first line in the history.
       end-of-history (M->)
	      Move to the end of the input history, i.e., the line currently being entered.
       reverse-search-history (C-r)
	      Search backward starting at the current line and moving `up' through the history as
	      necessary.  This is an incremental search.
       forward-search-history (C-s)
	      Search forward starting at the current line and moving `down' through  the  history
	      as necessary.  This is an incremental search.
       non-incremental-reverse-search-history (M-p)
	      Search backward through the history starting at the current line using a non-incre-
	      mental search for a string supplied by the user.
       non-incremental-forward-search-history (M-n)
	      Search forward through the history using a non-incremental search for a string sup-
	      plied by the user.
       history-search-forward
	      Search  forward  through the history for the string of characters between the start
	      of the current line and the point.  This is a non-incremental search.
       history-search-backward
	      Search backward through the history for the string of characters between the  start
	      of the current line and the point.  This is a non-incremental search.
       yank-nth-arg (M-C-y)
	      Insert  the  first argument to the previous command (usually the second word on the
	      previous line) at point.	With an argument n, insert the nth word from the previous
	      command (the words in the previous command begin with word 0).  A negative argument
	      inserts the nth word from the end of the previous command.  Once the argument n  is
	      computed, the argument is extracted as if the "!n" history expansion had been spec-
	      ified.
       yank-last-arg (M-., M-_)
	      Insert the last argument to the previous command (the last  word	of  the  previous
	      history  entry).	 With a numeric argument, behave exactly like yank-nth-arg.  Suc-
	      cessive calls to yank-last-arg move back through the history  list,  inserting  the
	      last word (or the word specified by the argument to the first call) of each line in
	      turn.  Any numeric argument supplied  to	these  successive  calls  determines  the
	      direction  to move through the history.  A negative argument switches the direction
	      through the history (back or forward).  The history expansion facilities	are  used
	      to extract the last argument, as if the "!$" history expansion had been specified.
       shell-expand-line (M-C-e)
	      Expand  the  line  as the shell does.  This performs alias and history expansion as
	      well as all of the shell word  expansions.   See	HISTORY  EXPANSION  below  for	a
	      description of history expansion.
       history-expand-line (M-^)
	      Perform  history	expansion on the current line.	See HISTORY EXPANSION below for a
	      description of history expansion.
       magic-space
	      Perform history expansion on the current line and  insert  a  space.   See  HISTORY
	      EXPANSION below for a description of history expansion.
       alias-expand-line
	      Perform  alias  expansion on the current line.  See ALIASES above for a description
	      of alias expansion.
       history-and-alias-expand-line
	      Perform history and alias expansion on the current line.
       insert-last-argument (M-., M-_)
	      A synonym for yank-last-arg.
       operate-and-get-next (C-o)
	      Accept the current line for execution and fetch the next line relative to the  cur-
	      rent line from the history for editing.  Any argument is ignored.
       edit-and-execute-command (C-xC-e)
	      Invoke  an editor on the current command line, and execute the result as shell com-
	      mands.  Bash attempts to invoke $VISUAL, $EDITOR, and emacs as the editor, in  that
	      order.

   Commands for Changing Text
       delete-char (C-d)
	      Delete the character at point.  If point is at the beginning of the line, there are
	      no characters in	the  line,  and  the  last  character  typed  was  not	bound  to
	      delete-char, then return EOF.
       backward-delete-char (Rubout)
	      Delete  the  character  behind the cursor.  When given a numeric argument, save the
	      deleted text on the kill ring.
       forward-backward-delete-char
	      Delete the character under the cursor, unless the cursor is at the end of the line,
	      in which case the character behind the cursor is deleted.
       quoted-insert (C-q, C-v)
	      Add  the	next character typed to the line verbatim.  This is how to insert charac-
	      ters like C-q, for example.
       tab-insert (C-v TAB)
	      Insert a tab character.
       self-insert (a, b, A, 1, !, ...)
	      Insert the character typed.
       transpose-chars (C-t)
	      Drag the character before point forward over the character at point,  moving  point
	      forward  as well.  If point is at the end of the line, then this transposes the two
	      characters before point.	Negative arguments have no effect.
       transpose-words (M-t)
	      Drag the word before point past the word after point, moving point over  that  word
	      as well.	If point is at the end of the line, this transposes the last two words on
	      the line.
       upcase-word (M-u)
	      Uppercase the current (or following) word.  With a negative argument, uppercase the
	      previous word, but do not move point.
       downcase-word (M-l)
	      Lowercase the current (or following) word.  With a negative argument, lowercase the
	      previous word, but do not move point.
       capitalize-word (M-c)
	      Capitalize the current (or following) word.  With a negative  argument,  capitalize
	      the previous word, but do not move point.
       overwrite-mode
	      Toggle  overwrite  mode.	 With  an explicit positive numeric argument, switches to
	      overwrite mode.  With an explicit non-positive numeric argument, switches to insert
	      mode.   This  command  affects only emacs mode; vi mode does overwrite differently.
	      Each call to readline() starts in insert mode.  In overwrite mode, characters bound
	      to self-insert replace the text at point rather than pushing the text to the right.
	      Characters bound to backward-delete-char replace the character before point with	a
	      space.  By default, this command is unbound.

   Killing and Yanking
       kill-line (C-k)
	      Kill the text from point to the end of the line.
       backward-kill-line (C-x Rubout)
	      Kill backward to the beginning of the line.
       unix-line-discard (C-u)
	      Kill backward from point to the beginning of the line.  The killed text is saved on
	      the kill-ring.
       kill-whole-line
	      Kill all characters on the current line, no matter where point is.
       kill-word (M-d)
	      Kill from point to the end of the current word, or if between words, to the end  of
	      the next word.  Word boundaries are the same as those used by forward-word.
       backward-kill-word (M-Rubout)
	      Kill  the  word  behind point.  Word boundaries are the same as those used by back-
	      ward-word.
       shell-kill-word (M-d)
	      Kill from point to the end of the current word, or if between words, to the end  of
	      the next word.  Word boundaries are the same as those used by shell-forward-word.
       shell-backward-kill-word (M-Rubout)
	      Kill  the  word  behind  point.	Word  boundaries  are  the  same as those used by
	      shell-backward-word.
       unix-word-rubout (C-w)
	      Kill the word behind point, using white space as a word boundary.  The killed  text
	      is saved on the kill-ring.
       unix-filename-rubout
	      Kill  the  word behind point, using white space and the slash character as the word
	      boundaries.  The killed text is saved on the kill-ring.
       delete-horizontal-space (M-\)
	      Delete all spaces and tabs around point.
       kill-region
	      Kill the text in the current region.
       copy-region-as-kill
	      Copy the text in the region to the kill buffer.
       copy-backward-word
	      Copy the word before point to the kill buffer.  The word boundaries are the same as
	      backward-word.
       copy-forward-word
	      Copy the word following point to the kill buffer.  The word boundaries are the same
	      as forward-word.
       yank (C-y)
	      Yank the top of the kill ring into the buffer at point.
       yank-pop (M-y)
	      Rotate the kill ring, and yank the new top.  Only works following yank or yank-pop.

   Numeric Arguments
       digit-argument (M-0, M-1, ..., M--)
	      Add this digit to the argument already accumulating, or start a new argument.   M--
	      starts a negative argument.
       universal-argument
	      This  is another way to specify an argument.  If this command is followed by one or
	      more digits, optionally with a leading minus sign, those digits  define  the  argu-
	      ment.   If  the  command	is followed by digits, executing universal-argument again
	      ends the numeric argument, but is otherwise ignored.  As a special  case,  if  this
	      command  is  immediately	followed  by a character that is neither a digit or minus
	      sign, the argument count for the next command is multiplied by four.  The  argument
	      count  is  initially one, so executing this function the first time makes the argu-
	      ment count four, a second time makes the argument count sixteen, and so on.

   Completing
       complete (TAB)
	      Attempt to perform completion on the text before point.  Bash  attempts  completion
	      treating	the text as a variable (if the text begins with $), username (if the text
	      begins with ~), hostname (if the text begins with @), or command (including aliases
	      and  functions) in turn.	If none of these produces a match, filename completion is
	      attempted.
       possible-completions (M-?)
	      List the possible completions of the text before point.
       insert-completions (M-*)
	      Insert all completions of the text before point that would have been  generated  by
	      possible-completions.
       menu-complete
	      Similar to complete, but replaces the word to be completed with a single match from
	      the list of  possible  completions.   Repeated  execution  of  menu-complete  steps
	      through the list of possible completions, inserting each match in turn.  At the end
	      of the list of completions, the bell is rung (subject to the setting of bell-style)
	      and  the	original text is restored.  An argument of n moves n positions forward in
	      the list of matches; a negative argument may be used to move backward  through  the
	      list.  This command is intended to be bound to TAB, but is unbound by default.
       menu-complete-backward
	      Identical to menu-complete, but moves backward through the list of possible comple-
	      tions, as if menu-complete had been given a negative  argument.	This  command  is
	      unbound by default.
       delete-char-or-list
	      Deletes  the  character under the cursor if not at the beginning or end of the line
	      (like delete-char).  If at the end of  the  line,  behaves  identically  to  possi-
	      ble-completions.	This command is unbound by default.
       complete-filename (M-/)
	      Attempt filename completion on the text before point.
       possible-filename-completions (C-x /)
	      List the possible completions of the text before point, treating it as a filename.
       complete-username (M-~)
	      Attempt completion on the text before point, treating it as a username.
       possible-username-completions (C-x ~)
	      List the possible completions of the text before point, treating it as a username.
       complete-variable (M-$)
	      Attempt completion on the text before point, treating it as a shell variable.
       possible-variable-completions (C-x $)
	      List  the  possible  completions	of  the text before point, treating it as a shell
	      variable.
       complete-hostname (M-@)
	      Attempt completion on the text before point, treating it as a hostname.
       possible-hostname-completions (C-x @)
	      List the possible completions of the text before point, treating it as a hostname.
       complete-command (M-!)
	      Attempt completion on the text before point, treating it as a command  name.   Com-
	      mand  completion	attempts to match the text against aliases, reserved words, shell
	      functions, shell builtins, and finally executable filenames, in that order.
       possible-command-completions (C-x !)
	      List the possible completions of the text before point, treating it  as  a  command
	      name.
       dynamic-complete-history (M-TAB)
	      Attempt  completion on the text before point, comparing the text against lines from
	      the history list for possible completion matches.
       dabbrev-expand
	      Attempt menu completion on the text before point, comparing the text against  lines
	      from the history list for possible completion matches.
       complete-into-braces (M-{)
	      Perform  filename  completion  and insert the list of possible completions enclosed
	      within braces so the list is available to the shell (see Brace Expansion above).

   Keyboard Macros
       start-kbd-macro (C-x ()
	      Begin saving the characters typed into the current keyboard macro.
       end-kbd-macro (C-x ))
	      Stop saving the characters typed into the current keyboard macro and store the def-
	      inition.
       call-last-kbd-macro (C-x e)
	      Re-execute  the  last keyboard macro defined, by making the characters in the macro
	      appear as if typed at the keyboard.

   Miscellaneous
       re-read-init-file (C-x C-r)
	      Read in the contents of the inputrc file, and incorporate any bindings or  variable
	      assignments found there.
       abort (C-g)
	      Abort the current editing command and ring the terminal's bell (subject to the set-
	      ting of bell-style).
       do-uppercase-version (M-a, M-b, M-x, ...)
	      If the metafied character x is lowercase, run the command that is bound to the cor-
	      responding uppercase character.
       prefix-meta (ESC)
	      Metafy the next character typed.	ESC f is equivalent to Meta-f.
       undo (C-_, C-x C-u)
	      Incremental undo, separately remembered for each line.
       revert-line (M-r)
	      Undo all changes made to this line.  This is like executing the undo command enough
	      times to return the line to its initial state.
       tilde-expand (M-&)
	      Perform tilde expansion on the current word.
       set-mark (C-@, M-<space>)
	      Set the mark to the point.  If a numeric argument is supplied, the mark is  set  to
	      that position.
       exchange-point-and-mark (C-x C-x)
	      Swap  the  point	with  the  mark.  The current cursor position is set to the saved
	      position, and the old cursor position is saved as the mark.
       character-search (C-])
	      A character is read and point is moved to the next occurrence of that character.	A
	      negative count searches for previous occurrences.
       character-search-backward (M-C-])
	      A  character  is read and point is moved to the previous occurrence of that charac-
	      ter.  A negative count searches for subsequent occurrences.
       skip-csi-sequence
	      Read enough characters to consume a multi-key sequence such as  those  defined  for
	      keys  like  Home	and  End.  Such sequences begin with a Control Sequence Indicator
	      (CSI), usually ESC-[.  If this sequence is  bound  to  "\[",  keys  producing  such
	      sequences  will  have  no  effect  unless  explicitly  bound to a readline command,
	      instead of inserting stray characters into the editing buffer.  This is unbound  by
	      default, but usually bound to ESC-[.
       insert-comment (M-#)
	      Without  a  numeric  argument,  the value of the readline comment-begin variable is
	      inserted at the beginning of the current line.  If a numeric argument is	supplied,
	      this  command  acts as a toggle:	if the characters at the beginning of the line do
	      not match the value of comment-begin, the value is inserted, otherwise the  charac-
	      ters  in comment-begin are deleted from the beginning of the line.  In either case,
	      the line is accepted as if a newline had been typed.  The  default  value  of  com-
	      ment-begin  causes  this	command  to  make the current line a shell comment.  If a
	      numeric argument causes the comment character to be removed, the line will be  exe-
	      cuted by the shell.
       glob-complete-word (M-g)
	      The  word  before  point	is  treated  as a pattern for pathname expansion, with an
	      asterisk implicitly appended.  This pattern is used to generate a list of  matching
	      file names for possible completions.
       glob-expand-word (C-x *)
	      The  word before point is treated as a pattern for pathname expansion, and the list
	      of matching file names is inserted, replacing the word.  If a numeric  argument  is
	      supplied, an asterisk is appended before pathname expansion.
       glob-list-expansions (C-x g)
	      The  list  of expansions that would have been generated by glob-expand-word is dis-
	      played, and the line is redrawn.	If a numeric argument is supplied, an asterisk is
	      appended before pathname expansion.
       dump-functions
	      Print  all  of  the functions and their key bindings to the readline output stream.
	      If a numeric argument is supplied, the output is formatted in such a  way  that  it
	      can be made part of an inputrc file.
       dump-variables
	      Print  all of the settable readline variables and their values to the readline out-
	      put stream.  If a numeric argument is supplied, the output is formatted in  such	a
	      way that it can be made part of an inputrc file.
       dump-macros
	      Print  all  of the readline key sequences bound to macros and the strings they out-
	      put.  If a numeric argument is supplied, the output is formatted in such a way that
	      it can be made part of an inputrc file.
       display-shell-version (C-x C-v)
	      Display version information about the current instance of bash.

   Programmable Completion
       When  word  completion  is  attempted  for an argument to a command for which a completion
       specification (a compspec) has been defined using the complete builtin (see SHELL  BUILTIN
       COMMANDS below), the programmable completion facilities are invoked.

       First,  the  command name is identified.  If the command word is the empty string (comple-
       tion attempted at the beginning of an empty line), any compspec defined with the -E option
       to  complete  is  used.	 If a compspec has been defined for that command, the compspec is
       used to generate the list of possible completions for the word.	If the command word is	a
       full  pathname, a compspec for the full pathname is searched for first.	If no compspec is
       found for the full pathname, an attempt is made to find a compspec for the portion follow-
       ing  the final slash.  If those searches do not result in a compspec, any compspec defined
       with the -D option to complete is used as the default.

       Once a compspec has been found, it is used to generate the list of matching words.   If	a
       compspec  is not found, the default bash completion as described above under Completing is
       performed.

       First, the actions specified by the compspec are used.  Only matches which are prefixed by
       the  word  being completed are returned.  When the -f or -d option is used for filename or
       directory name completion, the shell variable FIGNORE is used to filter the matches.

       Any completions specified by a pathname expansion pattern to the -G option  are	generated
       next.   The  words  generated by the pattern need not match the word being completed.  The
       GLOBIGNORE shell variable is not used to filter the matches, but the FIGNORE  variable  is
       used.

       Next,  the string specified as the argument to the -W option is considered.  The string is
       first split using the characters in the IFS special variable as delimiters.  Shell quoting
       is  honored.  Each word is then expanded using brace expansion, tilde expansion, parameter
       and variable expansion, command substitution, and arithmetic expansion, as described above
       under  EXPANSION.  The results are split using the rules described above under Word Split-
       ting.  The results of the expansion are prefix-matched against the word	being  completed,
       and the matching words become the possible completions.

       After  these matches have been generated, any shell function or command specified with the
       -F and -C options is invoked.  When the command or function  is	invoked,  the  COMP_LINE,
       COMP_POINT, COMP_KEY, and COMP_TYPE variables are assigned values as described above under
       Shell Variables.  If a shell function is being  invoked,  the  COMP_WORDS  and  COMP_CWORD
       variables  are  also  set.  When the function or command is invoked, the first argument is
       the name of the command whose arguments are being completed, the second	argument  is  the
       word  being  completed,	and  the third argument is the word preceding the word being com-
       pleted on the current command line.  No filtering of the generated completions against the
       word  being completed is performed; the function or command has complete freedom in gener-
       ating the matches.

       Any function specified with -F is invoked first.  The function may use any  of  the  shell
       facilities,  including  the  compgen builtin described below, to generate the matches.  It
       must put the possible completions in the COMPREPLY array variable.

       Next, any command specified with the -C option is invoked in an environment equivalent  to
       command	substitution.	It should print a list of completions, one per line, to the stan-
       dard output.  Backslash may be used to escape a newline, if necessary.

       After all of the possible completions are generated, any  filter  specified  with  the  -X
       option  is applied to the list.	The filter is a pattern as used for pathname expansion; a
       & in the pattern is replaced with the text of the word being completed.	A literal  &  may
       be escaped with a backslash; the backslash is removed before attempting a match.  Any com-
       pletion that matches the pattern will be removed from the list.	A leading !  negates  the
       pattern; in this case any completion not matching the pattern will be removed.

       Finally, any prefix and suffix specified with the -P and -S options are added to each mem-
       ber of the completion list, and the result is returned to the readline completion code  as
       the list of possible completions.

       If  the previously-applied actions do not generate any matches, and the -o dirnames option
       was supplied to complete when the compspec  was	defined,  directory  name  completion  is
       attempted.

       If  the	-o plusdirs option was supplied to complete when the compspec was defined, direc-
       tory name completion is attempted and any matches are added to the results  of  the  other
       actions.

       By  default,  if  a compspec is found, whatever it generates is returned to the completion
       code as the full set of possible  completions.	The  default  bash  completions  are  not
       attempted, and the readline default of filename completion is disabled.	If the -o bashde-
       fault option was supplied to complete when the compspec was defined, the bash default com-
       pletions are attempted if the compspec generates no matches.  If the -o default option was
       supplied to complete when the compspec was defined, readline's default completion will  be
       performed  if  the  compspec (and, if attempted, the default bash completions) generate no
       matches.

       When a compspec indicates that directory name completion is desired, the programmable com-
       pletion	functions  force readline to append a slash to completed names which are symbolic
       links to directories, subject to the value  of  the  mark-directories  readline	variable,
       regardless of the setting of the mark-symlinked-directories readline variable.

       There  is  some	support  for dynamically modifying completions.  This is most useful when
       used in combination with a default completion specified with complete -D.   It's  possible
       for  shell functions executed as completion handlers to indicate that completion should be
       retried by returning an exit status of 124.  If a shell function returns 124, and  changes
       the  compspec associated with the command on which completion is being attempted (supplied
       as the first argument when the function is  executed),  programmable  completion  restarts
       from  the beginning, with an attempt to find a new compspec for that command.  This allows
       a set of completions to be built dynamically as completion is attempted, rather than being
       loaded all at once.

       For  instance,  assuming  that there is a library of compspecs, each kept in a file corre-
       sponding to the name of the command, the following default completion function would  load
       completions dynamically:

       _completion_loader()
       {
	    . "/etc/bash_completion.d/$1.sh" >/dev/null 2>&1 && return 124
       }
       complete -D -F _completion_loader

HISTORY
       When the -o history option to the set builtin is enabled, the shell provides access to the
       command history, the list of commands previously typed.	The value of the  HISTSIZE  vari-
       able  is  used  as the number of commands to save in a history list.  The text of the last
       HISTSIZE commands (default 500) is saved.  The shell stores each command  in  the  history
       list  prior  to	parameter  and variable expansion (see EXPANSION above) but after history
       expansion is performed, subject to the values of the shell variables HISTIGNORE and  HIST-
       CONTROL.

       On  startup,  the  history  is  initialized  from  the file named by the variable HISTFILE
       (default ~/.bash_history).  The file named by the value of HISTFILE is truncated, if  nec-
       essary,	to  contain  no more than the number of lines specified by the value of HISTFILE-
       SIZE.  When the history file is read, lines beginning with the history  comment	character
       followed  immediately  by  a digit are interpreted as timestamps for the preceding history
       line.  These timestamps are optionally displayed depending on the value of  the	HISTTIME-
       FORMAT  variable.   When  an  interactive shell exits, the last $HISTSIZE lines are copied
       from the history list to $HISTFILE.  If the histappend shell option is  enabled	(see  the
       description  of	shopt  under SHELL BUILTIN COMMANDS below), the lines are appended to the
       history file, otherwise the history file is overwritten.  If HISTFILE is unset, or if  the
       history	file  is unwritable, the history is not saved.	If the HISTTIMEFORMAT variable is
       set, time stamps are written to the history file, marked with the history comment  charac-
       ter,  so they may be preserved across shell sessions.  This uses the history comment char-
       acter to distinguish timestamps from other history lines.  After saving the  history,  the
       history	file is truncated to contain no more than HISTFILESIZE lines.  If HISTFILESIZE is
       not set, no truncation is performed.

       The builtin command fc (see SHELL BUILTIN COMMANDS below) may be used to list or edit  and
       re-execute  a  portion of the history list.  The history builtin may be used to display or
       modify the history list and manipulate the history file.  When using command-line editing,
       search  commands  are  available  in  each editing mode that provide access to the history
       list.

       The shell allows control over which commands are saved on the history list.  The  HISTCON-
       TROL  and  HISTIGNORE variables may be set to cause the shell to save only a subset of the
       commands entered.  The cmdhist shell option, if enabled, causes the shell  to  attempt  to
       save  each line of a multi-line command in the same history entry, adding semicolons where
       necessary to preserve syntactic correctness.  The lithist shell option causes the shell to
       save the command with embedded newlines instead of semicolons.  See the description of the
       shopt builtin below under SHELL BUILTIN COMMANDS for information on setting and	unsetting
       shell options.

HISTORY EXPANSION
       The shell supports a history expansion feature that is similar to the history expansion in
       csh.  This section describes what syntax features are available.  This feature is  enabled
       by  default  for  interactive  shells,  and can be disabled using the +H option to the set
       builtin command (see SHELL BUILTIN COMMANDS below).  Non-interactive shells do not perform
       history expansion by default.

       History	expansions introduce words from the history list into the input stream, making it
       easy to repeat commands, insert the arguments to a previous command into the current input
       line, or fix errors in previous commands quickly.

       History expansion is performed immediately after a complete line is read, before the shell
       breaks it into words.  It takes place in two parts.  The first is to determine which  line
       from  the  history  list  to use during substitution.  The second is to select portions of
       that line for inclusion into the current one.  The line selected from the history  is  the
       event, and the portions of that line that are acted upon are words.  Various modifiers are
       available to manipulate the selected words.  The line is broken into  words  in	the  same
       fashion as when reading input, so that several metacharacter-separated words surrounded by
       quotes are considered one word.	History expansions are introduced by  the  appearance  of
       the  history  expansion	character,  which is ! by default.  Only backslash (\) and single
       quotes can quote the history expansion character.

       Several characters inhibit history expansion if found immediately  following  the  history
       expansion  character, even if it is unquoted: space, tab, newline, carriage return, and =.
       If the extglob shell option is enabled, ( will also inhibit expansion.

       Several shell options settable with the shopt builtin may be used to tailor  the  behavior
       of  history  expansion.	If the histverify shell option is enabled (see the description of
       the shopt builtin below), and readline is being used, history substitutions are not  imme-
       diately passed to the shell parser.  Instead, the expanded line is reloaded into the read-
       line editing buffer for	further  modification.	 If  readline  is  being  used,  and  the
       histreedit  shell  option  is enabled, a failed history substitution will be reloaded into
       the readline editing buffer for correction.  The -p option to the history builtin  command
       may be used to see what a history expansion will do before using it.  The -s option to the
       history builtin may be used to add commands to the end of the history list  without  actu-
       ally executing them, so that they are available for subsequent recall.

       The shell allows control of the various characters used by the history expansion mechanism
       (see the description of histchars above under Shell Variables).	The shell uses	the  his-
       tory comment character to mark history timestamps when writing the history file.

   Event Designators
       An  event  designator  is a reference to a command line entry in the history list.  Unless
       the reference is absolute, events are relative to the  current  position  in  the  history
       list.

       !      Start  a	history  substitution, except when followed by a blank, newline, carriage
	      return, = or ( (when the extglob shell option is enabled using the shopt builtin).
       !n     Refer to command line n.
       !-n    Refer to the current command minus n.
       !!     Refer to the previous command.  This is a synonym for `!-1'.
       !string
	      Refer to the most recent command preceding the current position in the history list
	      starting with string.
       !?string[?]
	      Refer  to  the  most  recent command preceding the current postition in the history
	      list containing string.  The trailing ? may be omitted if string is followed  imme-
	      diately by a newline.
       ^string1^string2^
	      Quick  substitution.   Repeat the previous command, replacing string1 with string2.
	      Equivalent to ``!!:s/string1/string2/'' (see Modifiers below).
       !#     The entire command line typed so far.

   Word Designators
       Word designators are used to select desired words from the event.  A : separates the event
       specification  from  the word designator.  It may be omitted if the word designator begins
       with a ^, $, *, -, or %.  Words are numbered from the beginning	of  the  line,	with  the
       first  word being denoted by 0 (zero).  Words are inserted into the current line separated
       by single spaces.

       0 (zero)
	      The zeroth word.	For the shell, this is the command word.
       n      The nth word.
       ^      The first argument.  That is, word 1.
       $      The last argument.
       %      The word matched by the most recent `?string?' search.
       x-y    A range of words; `-y' abbreviates `0-y'.
       *      All of the words but the zeroth.	This is a synonym for `1-$'.  It is not an  error
	      to  use  *  if there is just one word in the event; the empty string is returned in
	      that case.
       x*     Abbreviates x-$.
       x-     Abbreviates x-$ like x*, but omits the last word.

       If a word designator is supplied without an event specification, the previous  command  is
       used as the event.

   Modifiers
       After the optional word designator, there may appear a sequence of one or more of the fol-
       lowing modifiers, each preceded by a `:'.

       h      Remove a trailing file name component, leaving only the head.
       t      Remove all leading file name components, leaving the tail.
       r      Remove a trailing suffix of the form .xxx, leaving the basename.
       e      Remove all but the trailing suffix.
       p      Print the new command but do not execute it.
       q      Quote the substituted words, escaping further substitutions.
       x      Quote the substituted words as with q, but break into words at blanks and newlines.
       s/old/new/
	      Substitute new for the first occurrence of old in the event  line.   Any	delimiter
	      can be used in place of /.  The final delimiter is optional if it is the last char-
	      acter of the event line.	The delimiter may be quoted in old and new with a  single
	      backslash.   If  &  appears in new, it is replaced by old.  A single backslash will
	      quote the &.  If old is null, it is set to the last old substituted, or, if no pre-
	      vious history substitutions took place, the last string in a !?string[?]	search.
       &      Repeat the previous substitution.
       g      Cause  changes  to be applied over the entire event line.  This is used in conjunc-
	      tion with `:s' (e.g., `:gs/old/new/') or `:&'.  If used with  `:s',  any	delimiter
	      can  be  used  in place of /, and the final delimiter is optional if it is the last
	      character of the event line.  An a may be used as a synonym for g.
       G      Apply the following `s' modifier once to each word in the event line.

SHELL BUILTIN COMMANDS
       Unless otherwise noted, each builtin command  documented  in  this  section  as	accepting
       options	preceded  by - accepts -- to signify the end of the options.  The :, true, false,
       and test builtins do not accept options and do not treat -- specially.  The exit,  logout,
       break,  continue,  let,	and  shift builtins accept and process arguments beginning with -
       without requiring --.  Other builtins that accept  arguments  but  are  not  specified  as
       accepting  options  interpret arguments beginning with - as invalid options and require --
       to prevent this interpretation.
       : [arguments]
	      No effect; the command does nothing beyond expanding arguments and  performing  any
	      specified redirections.  A zero exit code is returned.

	.  filename [arguments]
       source filename [arguments]
	      Read and execute commands from filename in the current shell environment and return
	      the exit status of the last command executed from filename.  If filename	does  not
	      contain a slash, file names in PATH are used to find the directory containing file-
	      name.  The file searched for in PATH need not be executable.  When bash is  not  in
	      posix  mode, the current directory is searched if no file is found in PATH.  If the
	      sourcepath option to the shopt builtin command is  turned  off,  the  PATH  is  not
	      searched.   If  any  arguments  are supplied, they become the positional parameters
	      when filename is executed.  Otherwise the positional parameters are unchanged.  The
	      return  status  is the status of the last command exited within the script (0 if no
	      commands are executed), and false if filename is not found or cannot be read.

       alias [-p] [name[=value] ...]
	      Alias with no arguments or with the -p option prints the list  of  aliases  in  the
	      form alias name=value on standard output.  When arguments are supplied, an alias is
	      defined for each name whose value is given.  A trailing space in	value causes  the
	      next  word  to  be  checked for alias substitution when the alias is expanded.  For
	      each name in the argument list for which no value is supplied, the name  and  value
	      of  the  alias  is printed.  Alias returns true unless a name is given for which no
	      alias has been defined.

       bg [jobspec ...]
	      Resume each suspended job jobspec in the background, as if it had been started with
	      &.   If  jobspec is not present, the shell's notion of the current job is used.  bg
	      jobspec returns 0 unless run when job control is disabled or,  when  run	with  job
	      control  enabled,  any  specified  jobspec was not found or was started without job
	      control.

       bind [-m keymap] [-lpsvPSV]
       bind [-m keymap] [-q function] [-u function] [-r keyseq]
       bind [-m keymap] -f filename
       bind [-m keymap] -x keyseq:shell-command
       bind [-m keymap] keyseq:function-name
       bind readline-command
	      Display current readline key and function bindings, bind a key sequence to a  read-
	      line  function or macro, or set a readline variable.  Each non-option argument is a
	      command as it would appear in .inputrc, but each binding or command must be  passed
	      as  a  separate  argument; e.g., '"\C-x\C-r": re-read-init-file'.  Options, if sup-
	      plied, have the following meanings:
	      -m keymap
		     Use keymap as the keymap to be affected by the subsequent bindings.  Accept-
		     able  keymap  names  are  emacs, emacs-standard, emacs-meta, emacs-ctlx, vi,
		     vi-move, vi-command, and vi-insert.  vi is equivalent to  vi-command;  emacs
		     is equivalent to emacs-standard.
	      -l     List the names of all readline functions.
	      -p     Display  readline function names and bindings in such a way that they can be
		     re-read.
	      -P     List current readline function names and bindings.
	      -s     Display readline key sequences bound to macros and the strings  they  output
		     in such a way that they can be re-read.
	      -S     Display readline key sequences bound to macros and the strings they output.
	      -v     Display  readline	variable  names and values in such a way that they can be
		     re-read.
	      -V     List current readline variable names and values.
	      -f filename
		     Read key bindings from filename.
	      -q function
		     Query about which keys invoke the named function.
	      -u function
		     Unbind all keys bound to the named function.
	      -r keyseq
		     Remove any current binding for keyseq.
	      -x keyseq:shell-command
		     Cause shell-command  to  be  executed  whenever  keyseq  is  entered.   When
		     shell-command  is executed, the shell sets the READLINE_LINE variable to the
		     contents of the readline line buffer and the READLINE_POINT variable to  the
		     current  location	of  the insertion point.  If the executed command changes
		     the value of READLINE_LINE or  READLINE_POINT,  those  new  values  will  be
		     reflected in the editing state.

	      The return value is 0 unless an unrecognized option is given or an error occurred.

       break [n]
	      Exit  from  within a for, while, until, or select loop.  If n is specified, break n
	      levels.  n must be >= 1.	If n is greater than the number of enclosing  loops,  all
	      enclosing  loops are exited.  The return value is 0 unless n is not greater than or
	      equal to 1.

       builtin shell-builtin [arguments]
	      Execute the specified shell builtin, passing it arguments, and return its exit sta-
	      tus.   This  is  useful  when defining a function whose name is the same as a shell
	      builtin, retaining the functionality of the builtin within the  function.   The  cd
	      builtin	is   commonly  redefined  this	way.   The  return  status  is	false  if
	      shell-builtin is not a shell builtin command.

       caller [expr]
	      Returns the context of any active subroutine call (a shell  function  or	a  script
	      executed	with  the  . or source builtins).  Without expr, caller displays the line
	      number and source filename of the current subroutine call.  If a non-negative inte-
	      ger  is  supplied  as  expr,  caller displays the line number, subroutine name, and
	      source file corresponding to that position in the  current  execution  call  stack.
	      This  extra information may be used, for example, to print a stack trace.  The cur-
	      rent frame is frame 0.  The return value is 0 unless the shell is not  executing	a
	      subroutine call or expr does not correspond to a valid position in the call stack.

       cd [-L|[-P [-e]]] [dir]
	      Change  the  current  directory to dir.  The variable HOME is the default dir.  The
	      variable CDPATH defines the search path for the directory containing dir.  Alterna-
	      tive directory names in CDPATH are separated by a colon (:).  A null directory name
	      in CDPATH is the same as the current directory, i.e., ``.''.  If dir begins with	a
	      slash  (/),  then CDPATH is not used. The -P option says to use the physical direc-
	      tory structure instead of following symbolic links (see also the -P option  to  the
	      set  builtin  command); the -L option forces symbolic links to be followed.  If the
	      -e option is supplied with -P, and the current working directory cannot be success-
	      fully  determined after a successful directory change, cd will return an unsuccess-
	      ful status.  An argument of - is equivalent to $OLDPWD.  If a  non-empty	directory
	      name  from  CDPATH is used, or if - is the first argument, and the directory change
	      is successful, the absolute pathname of the new working directory is written to the
	      standard	output.   The  return  value  is  true	if the directory was successfully
	      changed; false otherwise.

       command [-pVv] command [arg ...]
	      Run command with args suppressing the normal shell function  lookup.  Only  builtin
	      commands	or  commands  found in the PATH are executed.  If the -p option is given,
	      the search for command is performed using a default value for PATH that is  guaran-
	      teed  to find all of the standard utilities.  If either the -V or -v option is sup-
	      plied, a description of command is printed.  The -v option  causes  a  single  word
	      indicating  the command or file name used to invoke command to be displayed; the -V
	      option produces a more verbose description.  If the -V or -v  option  is	supplied,
	      the exit status is 0 if command was found, and 1 if not.	If neither option is sup-
	      plied and an error occurred or command cannot be found, the  exit  status  is  127.
	      Otherwise, the exit status of the command builtin is the exit status of command.

       compgen [option] [word]
	      Generate	possible  completion matches for word according to the options, which may
	      be any option accepted by the complete builtin with the exception of -p and -r, and
	      write  the  matches  to  the standard output.  When using the -F or -C options, the
	      various shell variables set by the programmable completion facilities, while avail-
	      able, will not have useful values.

	      The  matches  will  be  generated in the same way as if the programmable completion
	      code had generated them directly from a  completion  specification  with	the  same
	      flags.   If  word  is  specified, only those completions matching word will be dis-
	      played.

	      The return value is true unless an invalid option is supplied, or no  matches  were
	      generated.

       complete [-abcdefgjksuv] [-o comp-option] [-DE] [-A action] [-G globpat] [-W wordlist] [-F
       function] [-C command]
	      [-X filterpat] [-P prefix] [-S suffix] name [name ...]
       complete -pr [-DE] [name ...]
	      Specify how arguments to each name should be completed.  If the -p option  is  sup-
	      plied,  or  if  no  options  are	supplied,  existing completion specifications are
	      printed in a way that allows them to be reused as input.	The -r option  removes	a
	      completion  specification  for each name, or, if no names are supplied, all comple-
	      tion specifications.  The -D  option  indicates  that  the  remaining  options  and
	      actions  should  apply  to  the ``default'' command completion; that is, completion
	      attempted on a command for which no completion has previously been defined.  The -E
	      option  indicates  that the remaining options and actions should apply to ``empty''
	      command completion; that is, completion attempted on a blank line.

	      The process of applying these completion specifications  when  word  completion  is
	      attempted is described above under Programmable Completion.

	      Other options, if specified, have the following meanings.  The arguments to the -G,
	      -W, and -X options (and, if necessary, the -P and -S options) should be  quoted  to
	      protect them from expansion before the complete builtin is invoked.
	      -o comp-option
		      The  comp-option controls several aspects of the compspec's behavior beyond
		      the simple generation of completions.  comp-option may be one of:
		      bashdefault
			      Perform the rest of the default bash completions	if  the  compspec
			      generates no matches.
		      default Use  readline's  default filename completion if the compspec gener-
			      ates no matches.
		      dirnames
			      Perform directory name completion  if  the  compspec  generates  no
			      matches.
		      filenames
			      Tell readline that the compspec generates filenames, so it can per-
			      form any filename-specific  processing  (like  adding  a	slash  to
			      directory  names, quoting special characters, or suppressing trail-
			      ing spaces).  Intended to be used with shell functions.
		      nospace Tell readline not to append a space (the	default)  to  words  com-
			      pleted at the end of the line.
		      plusdirs
			      After  any matches defined by the compspec are generated, directory
			      name completion is attempted and	any  matches  are  added  to  the
			      results of the other actions.
	      -A action
		      The  action may be one of the following to generate a list of possible com-
		      pletions:
		      alias   Alias names.  May also be specified as -a.
		      arrayvar
			      Array variable names.
		      binding Readline key binding names.
		      builtin Names of shell builtin commands.	May also be specified as -b.
		      command Command names.  May also be specified as -c.
		      directory
			      Directory names.	May also be specified as -d.
		      disabled
			      Names of disabled shell builtins.
		      enabled Names of enabled shell builtins.
		      export  Names of exported shell variables.  May also be specified as -e.
		      file    File names.  May also be specified as -f.
		      function
			      Names of shell functions.
		      group   Group names.  May also be specified as -g.
		      helptopic
			      Help topics as accepted by the help builtin.
		      hostname
			      Hostnames, as taken from the file specified by the  HOSTFILE  shell
			      variable.
		      job     Job names, if job control is active.  May also be specified as -j.
		      keyword Shell reserved words.  May also be specified as -k.
		      running Names of running jobs, if job control is active.
		      service Service names.  May also be specified as -s.
		      setopt  Valid arguments for the -o option to the set builtin.
		      shopt   Shell option names as accepted by the shopt builtin.
		      signal  Signal names.
		      stopped Names of stopped jobs, if job control is active.
		      user    User names.  May also be specified as -u.
		      variable
			      Names of all shell variables.  May also be specified as -v.
	      -C command
		      command  is  executed  in a subshell environment, and its output is used as
		      the possible completions.
	      -F function
		      The shell function function is executed in the current  shell  environment.
		      When  it finishes, the possible completions are retrieved from the value of
		      the COMPREPLY array variable.
	      -G globpat
		      The pathname expansion pattern globpat is expanded to generate the possible
		      completions.
	      -P prefix
		      prefix  is  added  at  the  beginning of each possible completion after all
		      other options have been applied.
	      -S suffix
		      suffix is appended to each possible completion after all other options have
		      been applied.
	      -W wordlist
		      The  wordlist  is split using the characters in the IFS special variable as
		      delimiters, and each resultant word is expanded.	The possible  completions
		      are the members of the resultant list which match the word being completed.
	      -X filterpat
		      filterpat  is  a	pattern as used for pathname expansion.  It is applied to
		      the list of possible completions generated by  the  preceding  options  and
		      arguments, and each completion matching filterpat is removed from the list.
		      A leading ! in filterpat negates the pattern; in this case, any  completion
		      not matching filterpat is removed.

	      The return value is true unless an invalid option is supplied, an option other than
	      -p or -r is supplied without a name argument, an attempt is made to remove  a  com-
	      pletion  specification  for  a  name for which no specification exists, or an error
	      occurs adding a completion specification.

       compopt [-o option] [-DE] [+o option] [name]
	      Modify completion options for each name according to the options, or for	the  cur-
	      rently-executing	completion  if	no  names are supplied.  If no options are given,
	      display the completion options for each name or the current completion.  The possi-
	      ble values of option are those valid for the complete builtin described above.  The
	      -D option indicates that the remaining options should apply to the ``default'' com-
	      mand completion; that is, completion attempted on a command for which no completion
	      has previously been defined.  The -E option indicates that  the  remaining  options
	      should  apply  to  ``empty'' command completion; that is, completion attempted on a
	      blank line.

	      The return value is true unless an invalid option is supplied, an attempt  is  made
	      to  modify  the options for a name for which no completion specification exists, or
	      an output error occurs.

       continue [n]
	      Resume the next iteration of the enclosing for, while, until, or select loop.  If n
	      is  specified,  resume at the nth enclosing loop.  n must be >= 1.  If n is greater
	      than the number of enclosing loops, the  last  enclosing	loop  (the  ``top-level''
	      loop)  is  resumed.  The return value is 0 unless n is not greater than or equal to
	      1.

       declare [-aAfFgilrtux] [-p] [name[=value] ...]
       typeset [-aAfFgilrtux] [-p] [name[=value] ...]
	      Declare variables and/or give them attributes.  If no names are given then  display
	      the  values  of variables.  The -p option will display the attributes and values of
	      each name.  When -p is used with name arguments, additional  options  are  ignored.
	      When -p is supplied without name arguments, it will display the attributes and val-
	      ues of all variables having the attributes specified by the additional options.  If
	      no other options are supplied with -p, declare will display the attributes and val-
	      ues of all shell variables.  The -f option will restrict the display to shell func-
	      tions.   The -F option inhibits the display of function definitions; only the func-
	      tion name and attributes are printed.  If the  extdebug  shell  option  is  enabled
	      using shopt, the source file name and line number where the function is defined are
	      displayed as well.  The -F option implies -f.  The -g option forces variables to be
	      created  or  modified at the global scope, even when declare is executed in a shell
	      function.  It is ignored in all other cases.  The following options can be used  to
	      restrict	output	to  variables  with  the specified attribute or to give variables
	      attributes:
	      -a     Each name is an indexed array variable (see Arrays above).
	      -A     Each name is an associative array variable (see Arrays above).
	      -f     Use function names only.
	      -i     The variable is treated as an integer; arithmetic evaluation (see ARITHMETIC
		     EVALUATION above) is performed when the variable is assigned a value.
	      -l     When  the	variable  is assigned a value, all upper-case characters are con-
		     verted to lower-case.  The upper-case attribute is disabled.
	      -r     Make names readonly.  These names cannot then be assigned values  by  subse-
		     quent assignment statements or unset.
	      -t     Give  each name the trace attribute.  Traced functions inherit the DEBUG and
		     RETURN traps from the calling shell.  The trace  attribute  has  no  special
		     meaning for variables.
	      -u     When  the	variable  is assigned a value, all lower-case characters are con-
		     verted to upper-case.  The lower-case attribute is disabled.
	      -x     Mark names for export to subsequent commands via the environment.

	      Using `+' instead of `-' turns off the attribute instead, with the exceptions  that
	      +a may not be used to destroy an array variable and +r will not remove the readonly
	      attribute.  When used in a function, makes each name local, as with the local  com-
	      mand,  unless  the -g option is supplied, If a variable name is followed by =value,
	      the value of the variable is set to value.  The return value is 0 unless an invalid
	      option  is  encountered,	an  attempt  is  made  to  define  a  function using ``-f
	      foo=bar'', an attempt is made to assign a value to a readonly variable, an  attempt
	      is  made	to assign a value to an array variable without using the compound assign-
	      ment syntax (see Arrays above), one of the names is  not	a  valid  shell  variable
	      name,  an  attempt  is made to turn off readonly status for a readonly variable, an
	      attempt is made to turn off array status for an array variable, or  an  attempt  is
	      made to display a non-existent function with -f.

       dirs [+n] [-n] [-clpv]
	      Without  options,  displays  the	list  of  currently  remembered directories.  The
	      default display is on a single line  with  directory  names  separated  by  spaces.
	      Directories  are added to the list with the pushd command; the popd command removes
	      entries from the list.
	      +n     Displays the nth entry counting from the left of the list shown by dirs when
		     invoked without options, starting with zero.
	      -n     Displays  the  nth  entry	counting from the right of the list shown by dirs
		     when invoked without options, starting with zero.
	      -c     Clears the directory stack by deleting all of the entries.
	      -l     Produces a longer listing; the default listing format uses a tilde to denote
		     the home directory.
	      -p     Print the directory stack with one entry per line.
	      -v     Print the directory stack with one entry per line, prefixing each entry with
		     its index in the stack.

	      The return value is 0 unless an invalid option is supplied or n indexes beyond  the
	      end of the directory stack.

       disown [-ar] [-h] [jobspec ...]
	      Without options, each jobspec is removed from the table of active jobs.  If jobspec
	      is not present, and neither -a nor -r is supplied, the shell's notion of	the  cur-
	      rent  job is used.  If the -h option is given, each jobspec is not removed from the
	      table, but is marked so that SIGHUP is not sent to the job if the shell receives	a
	      SIGHUP.	If  no	jobspec  is present, and neither the -a nor the -r option is sup-
	      plied, the current job is used.  If no jobspec is supplied, the -a option means  to
	      remove  or mark all jobs; the -r option without a jobspec argument restricts opera-
	      tion to running jobs.  The return value is 0 unless a jobspec does  not  specify	a
	      valid job.

       echo [-neE] [arg ...]
	      Output  the args, separated by spaces, followed by a newline.  The return status is
	      always 0.  If -n is specified, the trailing  newline  is	suppressed.   If  the  -e
	      option  is  given,  interpretation of the following backslash-escaped characters is
	      enabled.	The -E option disables the interpretation  of  these  escape  characters,
	      even  on	systems where they are interpreted by default.	The xpg_echo shell option
	      may be used to dynamically determine whether or not echo expands these escape char-
	      acters  by  default.   echo does not interpret -- to mean the end of options.  echo
	      interprets the following escape sequences:
	      \a     alert (bell)
	      \b     backspace
	      \c     suppress further output
	      \e
	      \E     an escape character
	      \f     form feed
	      \n     new line
	      \r     carriage return
	      \t     horizontal tab
	      \v     vertical tab
	      \\     backslash
	      \0nnn  the eight-bit character whose value is the octal value nnn  (zero	to  three
		     octal digits)
	      \xHH   the  eight-bit character whose value is the hexadecimal value HH (one or two
		     hex digits)
	      \uHHHH the Unicode (ISO/IEC 10646) character whose value is the  hexadecimal  value
		     HHHH (one to four hex digits)
	      \UHHHHHHHH
		     the  Unicode  (ISO/IEC 10646) character whose value is the hexadecimal value
		     HHHHHHHH (one to eight hex digits)

       enable [-a] [-dnps] [-f filename] [name ...]
	      Enable and disable builtin shell commands.  Disabling a builtin allows a disk  com-
	      mand which has the same name as a shell builtin to be executed without specifying a
	      full pathname, even though the shell normally searches  for  builtins  before  disk
	      commands.  If -n is used, each name is disabled; otherwise, names are enabled.  For
	      example, to use the test binary found via the PATH instead  of  the  shell  builtin
	      version,	run ``enable -n test''.  The -f option means to load the new builtin com-
	      mand name from shared object filename, on systems  that  support	dynamic  loading.
	      The  -d  option  will delete a builtin previously loaded with -f.  If no name argu-
	      ments are given, or if the -p option is supplied,  a  list  of  shell  builtins  is
	      printed.	 With  no  other option arguments, the list consists of all enabled shell
	      builtins.  If -n is supplied, only disabled builtins are printed.  If  -a  is  sup-
	      plied, the list printed includes all builtins, with an indication of whether or not
	      each is enabled.	If -s is supplied, the output is restricted to the POSIX  special
	      builtins.   The  return value is 0 unless a name is not a shell builtin or there is
	      an error loading a new builtin from a shared object.

       eval [arg ...]
	      The args are read and concatenated together into a single command.  This command is
	      then  read  and executed by the shell, and its exit status is returned as the value
	      of eval.	If there are no args, or only null arguments, eval returns 0.

       exec [-cl] [-a name] [command [arguments]]
	      If command is specified, it replaces the shell.  No new process  is  created.   The
	      arguments become the arguments to command.  If the -l option is supplied, the shell
	      places a dash at the beginning of the zeroth argument passed to command.	 This  is
	      what  login(1)  does.   The  -c  option causes command to be executed with an empty
	      environment.  If -a is supplied, the shell passes name as the  zeroth  argument  to
	      the  executed command.  If command cannot be executed for some reason, a non-inter-
	      active shell exits, unless the shell option execfail is enabled, in which  case  it
	      returns  failure.   An interactive shell returns failure if the file cannot be exe-
	      cuted.  If command is not specified, any redirections take effect  in  the  current
	      shell,  and  the	return	status is 0.  If there is a redirection error, the return
	      status is 1.

       exit [n]
	      Cause the shell to exit with a status of n.  If n is omitted, the  exit  status  is
	      that  of	the  last  command executed.  A trap on EXIT is executed before the shell
	      terminates.

       export [-fn] [name[=word]] ...
       export -p
	      The supplied names are marked for automatic export to  the  environment  of  subse-
	      quently  executed  commands.   If  the -f option is given, the names refer to func-
	      tions.  If no names are given, or if the -p option is supplied, a list of all names
	      that  are exported in this shell is printed.  The -n option causes the export prop-
	      erty to be removed from each name.  If a variable name is followed  by  =word,  the
	      value of the variable is set to word.  export returns an exit status of 0 unless an
	      invalid option is encountered, one of the names is not a valid shell variable name,
	      or -f is supplied with a name that is not a function.

       fc [-e ename] [-lnr] [first] [last]
       fc -s [pat=rep] [cmd]
	      Fix Command.  In the first form, a range of commands from first to last is selected
	      from the history list.  First and last may be specified as a string (to locate  the
	      last  command beginning with that string) or as a number (an index into the history
	      list, where a negative number is used as an offset from the  current  command  num-
	      ber).   If  last	is not specified it is set to the current command for listing (so
	      that ``fc -l -10'' prints the last 10 commands) and to first otherwise.	If  first
	      is not specified it is set to the previous command for editing and -16 for listing.

	      The  -n option suppresses the command numbers when listing.  The -r option reverses
	      the order of the commands.  If the -l option is given, the commands are  listed  on
	      standard	output.   Otherwise,  the editor given by ename is invoked on a file con-
	      taining those commands.  If ename is not given, the value of the FCEDIT variable is
	      used, and the value of EDITOR if FCEDIT is not set.  If neither variable is set, vi
	      is used.	When editing is complete, the edited commands are echoed and executed.

	      In the second form, command is re-executed after each instance of pat  is  replaced
	      by  rep.	A useful alias to use with this is ``r="fc -s"'', so that typing ``r cc''
	      runs the last command beginning with ``cc'' and typing ``r'' re-executes	the  last
	      command.

	      If  the  first  form  is	used,  the  return value is 0 unless an invalid option is
	      encountered or first or last specify history lines out of range.	If the -e  option
	      is  supplied, the return value is the value of the last command executed or failure
	      if an error occurs with the temporary file of commands.	If  the  second  form  is
	      used,  the  return  status  is that of the command re-executed, unless cmd does not
	      specify a valid history line, in which case fc returns failure.

       fg [jobspec]
	      Resume jobspec in the foreground, and make it the current job.  If jobspec  is  not
	      present,	the  shell's notion of the current job is used.  The return value is that
	      of the command placed into the foreground, or failure if run when  job  control  is
	      disabled or, when run with job control enabled, if jobspec does not specify a valid
	      job or jobspec specifies a job that was started without job control.

       getopts optstring name [args]
	      getopts is used by shell procedures to parse positional parameters.  optstring con-
	      tains  the  option  characters  to  be  recognized; if a character is followed by a
	      colon, the option is expected to have an argument, which should be  separated  from
	      it  by  white  space.   The  colon  and question mark characters may not be used as
	      option characters.  Each time it is invoked, getopts places the next option in  the
	      shell  variable  name, initializing name if it does not exist, and the index of the
	      next argument to be processed into the variable OPTIND.  OPTIND is initialized to 1
	      each time the shell or a shell script is invoked.  When an option requires an argu-
	      ment, getopts places that argument into the variable OPTARG.  The  shell	does  not
	      reset  OPTIND  automatically;  it  must be manually reset between multiple calls to
	      getopts within the same shell invocation if a new set of parameters is to be used.

	      When the end of options is encountered, getopts exits with a return  value  greater
	      than  zero.   OPTIND is set to the index of the first non-option argument, and name
	      is set to ?.

	      getopts normally parses the positional parameters, but if more arguments are  given
	      in args, getopts parses those instead.

	      getopts  can  report  errors in two ways.  If the first character of optstring is a
	      colon, silent error reporting is used.  In normal operation diagnostic messages are
	      printed  when  invalid options or missing option arguments are encountered.  If the
	      variable OPTERR is set to 0, no error messages will be displayed, even if the first
	      character of optstring is not a colon.

	      If an invalid option is seen, getopts places ? into name and, if not silent, prints
	      an error message and unsets OPTARG.  If getopts is  silent,  the	option	character
	      found is placed in OPTARG and no diagnostic message is printed.

	      If a required argument is not found, and getopts is not silent, a question mark (?)
	      is placed in name, OPTARG is unset,  and	a  diagnostic  message	is  printed.   If
	      getopts  is  silent,  then  a  colon (:) is placed in name and OPTARG is set to the
	      option character found.

	      getopts returns true if an option, specified or unspecified, is found.  It  returns
	      false if the end of options is encountered or an error occurs.

       hash [-lr] [-p filename] [-dt] [name]
	      Each  time  hash is invoked, the full pathname of the command name is determined by
	      searching the directories in $PATH and remembered.  Any previously-remembered path-
	      name  is discarded.  If the -p option is supplied, no path search is performed, and
	      filename is used as the full file name of the command.  The -r  option  causes  the
	      shell to forget all remembered locations.  The -d option causes the shell to forget
	      the remembered location of each name.  If the -t option is supplied, the full path-
	      name  to	which  each  name corresponds is printed.  If multiple name arguments are
	      supplied with -t, the name is printed before the	hashed	full  pathname.   The  -l
	      option  causes  output to be displayed in a format that may be reused as input.  If
	      no arguments are given, or if only -l is	supplied,  information	about  remembered
	      commands	is  printed.   The return status is true unless a name is not found or an
	      invalid option is supplied.

       help [-dms] [pattern]
	      Display helpful information about builtin commands.  If pattern is specified,  help
	      gives  detailed  help  on all commands matching pattern; otherwise help for all the
	      builtins and shell control structures is printed.
	      -d     Display a short description of each pattern
	      -m     Display the description of each pattern in a manpage-like format
	      -s     Display only a short usage synopsis for each pattern

	      The return status is 0 unless no command matches pattern.

       history [n]
       history -c
       history -d offset
       history -anrw [filename]
       history -p arg [arg ...]
       history -s arg [arg ...]
	      With no options, display the command history list with line numbers.  Lines  listed
	      with a * have been modified.  An argument of n lists only the last n lines.  If the
	      shell variable HISTTIMEFORMAT is set and not null, it is used as	a  format  string
	      for  strftime(3)	to  display the time stamp associated with each displayed history
	      entry.  No intervening blank is printed between the formatted time  stamp  and  the
	      history line.  If filename is supplied, it is used as the name of the history file;
	      if not, the value of HISTFILE is used.  Options, if supplied,  have  the	following
	      meanings:
	      -c     Clear the history list by deleting all the entries.
	      -d offset
		     Delete the history entry at position offset.
	      -a     Append  the ``new'' history lines (history lines entered since the beginning
		     of the current bash session) to the history file.
	      -n     Read the history lines not already read from the history file into the  cur-
		     rent  history  list.  These are lines appended to the history file since the
		     beginning of the current bash session.
	      -r     Read the contents of the history file and use them as the current history.
	      -w     Write the current history to  the	history  file,	overwriting  the  history
		     file's contents.
	      -p     Perform history substitution on the following args and display the result on
		     the standard output.  Does not store the results in the history list.   Each
		     arg must be quoted to disable normal history expansion.
	      -s     Store  the  args in the history list as a single entry.  The last command in
		     the history list is removed before the args are added.

	      If the HISTTIMEFORMAT variable is set, the time stamp information  associated  with
	      each  history entry is written to the history file, marked with the history comment
	      character.  When the history file is read, lines beginning with the history comment
	      character  followed  immediately	by  a digit are interpreted as timestamps for the
	      previous history line.  The return value is 0 unless an invalid option  is  encoun-
	      tered, an error occurs while reading or writing the history file, an invalid offset
	      is supplied as an argument to -d, or the history expansion supplied as an  argument
	      to -p fails.

       jobs [-lnprs] [ jobspec ... ]
       jobs -x command [ args ... ]
	      The first form lists the active jobs.  The options have the following meanings:
	      -l     List process IDs in addition to the normal information.
	      -n     Display  information only about jobs that have changed status since the user
		     was last notified of their status.
	      -p     List only the process ID of the job's process group leader.
	      -r     Restrict output to running jobs.
	      -s     Restrict output to stopped jobs.

	      If jobspec is given, output is restricted  to  information  about  that  job.   The
	      return status is 0 unless an invalid option is encountered or an invalid jobspec is
	      supplied.

	      If the -x option is supplied, jobs replaces any jobspec found in	command  or  args
	      with  the  corresponding	process  group	ID, and executes command passing it args,
	      returning its exit status.

       kill [-s sigspec | -n signum | -sigspec] [pid | jobspec] ...
       kill -l [sigspec | exit_status]
	      Send the signal named by sigspec or signum to the processes named by  pid  or  job-
	      spec.   sigspec  is  either a case-insensitive signal name such as SIGKILL (with or
	      without the SIG prefix) or a signal number; signum is a signal number.  If  sigspec
	      is not present, then SIGTERM is assumed.	An argument of -l lists the signal names.
	      If any arguments are supplied when -l is given, the names  of  the  signals  corre-
	      sponding	to the arguments are listed, and the return status is 0.  The exit_status
	      argument to -l is a number specifying either a signal number or the exit status  of
	      a  process  terminated  by  a signal.  kill returns true if at least one signal was
	      successfully sent, or false if an error occurs or an invalid option is encountered.

       let arg [arg ...]
	      Each arg is an arithmetic expression to be  evaluated  (see  ARITHMETIC  EVALUATION
	      above).  If the last arg evaluates to 0, let returns 1; 0 is returned otherwise.

       local [option] [name[=value] ...]
	      For each argument, a local variable named name is created, and assigned value.  The
	      option can be any of the options accepted by declare.  When local is used within	a
	      function,  it  causes  the variable name to have a visible scope restricted to that
	      function and its children.  With no operands, local writes a list  of  local  vari-
	      ables  to the standard output.  It is an error to use local when not within a func-
	      tion.  The return status is 0 unless local is used outside a function,  an  invalid
	      name is supplied, or name is a readonly variable.

       logout Exit a login shell.

       mapfile [-n count] [-O origin] [-s count] [-t] [-u fd] [-C callback] [-c quantum] [array]
       readarray  [-n  count]  [-O  origin]  [-s  count]  [-t] [-u fd] [-C callback] [-c quantum]
       [array]
	      Read lines from the standard input into the indexed array variable array,  or  from
	      file  descriptor	fd  if	the  -u  option is supplied.  The variable MAPFILE is the
	      default array.  Options, if supplied, have the following meanings:
	      -n     Copy at most count lines.	If count is 0, all lines are copied.
	      -O     Begin assigning to array at index origin.	The default index is 0.
	      -s     Discard the first count lines read.
	      -t     Remove a trailing newline from each line read.
	      -u     Read lines from file descriptor fd instead of the standard input.
	      -C     Evaluate callback each time quantum lines are read.  The -c option specifies
		     quantum.
	      -c     Specify the number of lines read between each call to callback.

	      If -C is specified without -c, the default quantum is 5000.  When callback is eval-
	      uated, it is supplied the index of the next array element to be  assigned  and  the
	      line to be assigned to that element as additional arguments.  callback is evaluated
	      after the line is read but before the array element is assigned.

	      If not supplied with an explicit origin, mapfile will clear array before	assigning
	      to it.

	      mapfile  returns	successfully  unless an invalid option or option argument is sup-
	      plied, array is invalid or unassignable, or if array is not an indexed array.

       popd [-n] [+n] [-n]
	      Removes entries from the directory stack.   With	no  arguments,	removes  the  top
	      directory  from  the stack, and performs a cd to the new top directory.  Arguments,
	      if supplied, have the following meanings:
	      -n     Suppresses the normal change of directory when removing directories from the
		     stack, so that only the stack is manipulated.
	      +n     Removes  the  nth	entry  counting  from the left of the list shown by dirs,
		     starting with zero.  For example: ``popd +0'' removes the	first  directory,
		     ``popd +1'' the second.
	      -n     Removes  the  nth	entry  counting from the right of the list shown by dirs,
		     starting with zero.  For example: ``popd -0'' removes  the  last  directory,
		     ``popd -1'' the next to last.

	      If the popd command is successful, a dirs is performed as well, and the return sta-
	      tus is 0.  popd returns false if an invalid option is  encountered,  the	directory
	      stack is empty, a non-existent directory stack entry is specified, or the directory
	      change fails.

       printf [-v var] format [arguments]
	      Write the formatted arguments to the standard output under the control of the  for-
	      mat.   The  -v  option  causes the output to be assigned to the variable var rather
	      than being printed to the standard output.

	      The format is a character string which contains three types of objects: plain char-
	      acters,  which  are  simply  copied to standard output, character escape sequences,
	      which are converted and copied to the standard output, and  format  specifications,
	      each  of which causes printing of the next successive argument.  In addition to the
	      standard printf(1) format specifications, printf interprets  the	following  exten-
	      sions:
	      %b     causes  printf  to  expand  backslash  escape sequences in the corresponding
		     argument (except that \c terminates output, backslashes in \',  \",  and  \?
		     are  not removed, and octal escapes beginning with \0 may contain up to four
		     digits).
	      %q     causes printf to output the corresponding argument in a format that  can  be
		     reused as shell input.
	      %(datefmt)T
		     causes printf to output the date-time string resulting from using datefmt as
		     a format string for strftime(3).  The corresponding argument is  an  integer
		     representing  the	number	of seconds since the epoch.  Two special argument
		     values may be used: -1 represents the current time, and  -2  represents  the
		     time the shell was invoked.

	      Arguments to non-string format specifiers are treated as C constants, except that a
	      leading plus or minus sign is allowed, and if the leading character is a single  or
	      double quote, the value is the ASCII value of the following character.

	      The  format  is reused as necessary to consume all of the arguments.  If the format
	      requires more arguments than are supplied, the extra format  specifications  behave
	      as  if  a zero value or null string, as appropriate, had been supplied.  The return
	      value is zero on success, non-zero on failure.

       pushd [-n] [+n] [-n]
       pushd [-n] [dir]
	      Adds a directory to the top of the directory stack, or rotates  the  stack,  making
	      the  new	top  of  the  stack  the  current  working directory.  With no arguments,
	      exchanges the top two directories and returns 0,	unless	the  directory	stack  is
	      empty.  Arguments, if supplied, have the following meanings:
	      -n     Suppresses  the  normal  change  of directory when adding directories to the
		     stack, so that only the stack is manipulated.
	      +n     Rotates the stack so that the nth directory (counting from the left  of  the
		     list shown by dirs, starting with zero) is at the top.
	      -n     Rotates  the stack so that the nth directory (counting from the right of the
		     list shown by dirs, starting with zero) is at the top.
	      dir    Adds dir to the directory stack at the top, making it the new current  work-
		     ing directory.

	      If the pushd command is successful, a dirs is performed as well.	If the first form
	      is used, pushd returns 0 unless the cd to dir fails.  With the second  form,  pushd
	      returns  0 unless the directory stack is empty, a non-existent directory stack ele-
	      ment is specified, or the directory change to the specified new  current	directory
	      fails.

       pwd [-LP]
	      Print the absolute pathname of the current working directory.  The pathname printed
	      contains no symbolic links if the -P option is supplied or the -o  physical  option
	      to  the  set  builtin  command  is enabled.  If the -L option is used, the pathname
	      printed may contain symbolic links.  The return status is 0 unless an error  occurs
	      while reading the name of the current directory or an invalid option is supplied.

       read  [-ers] [-a aname] [-d delim] [-i text] [-n nchars] [-N nchars] [-p prompt] [-t time-
       out] [-u fd] [name ...]
	      One line is read from the standard input, or from the file descriptor  fd  supplied
	      as  an argument to the -u option, and the first word is assigned to the first name,
	      the second word to the second name, and so on, with leftover words and their inter-
	      vening  separators  assigned  to the last name.  If there are fewer words read from
	      the input stream than names, the remaining names are assigned  empty  values.   The
	      characters  in  IFS are used to split the line into words.  The backslash character
	      (\) may be used to remove any special meaning for the next character read  and  for
	      line continuation.  Options, if supplied, have the following meanings:
	      -a aname
		     The  words  are  assigned to sequential indices of the array variable aname,
		     starting at 0.  aname is unset before any new values  are	assigned.   Other
		     name arguments are ignored.
	      -d delim
		     The  first  character  of	delim is used to terminate the input line, rather
		     than newline.
	      -e     If the standard input is coming from  a  terminal,  readline  (see  READLINE
		     above)  is  used to obtain the line.  Readline uses the current (or default,
		     if line editing was not previously active) editing settings.
	      -i text
		     If readline is being used to read the line, text is placed into the  editing
		     buffer before editing begins.
	      -n nchars
		     read  returns after reading nchars characters rather than waiting for a com-
		     plete line of input, but honor a delimiter if fewer than  nchars  characters
		     are read before the delimiter.
	      -N nchars
		     read returns after reading exactly nchars characters rather than waiting for
		     a complete line of input, unless EOF  is  encountered  or	read  times  out.
		     Delimiter	characters encountered in the input are not treated specially and
		     do not cause read to return until nchars characters are read.
	      -p prompt
		     Display prompt  on  standard  error,  without  a  trailing  newline,  before
		     attempting to read any input.  The prompt is displayed only if input is com-
		     ing from a terminal.
	      -r     Backslash does not act as an escape character.  The backslash is  considered
		     to  be part of the line.  In particular, a backslash-newline pair may not be
		     used as a line continuation.
	      -s     Silent mode.  If input is coming from a terminal, characters are not echoed.
	      -t timeout
		     Cause read to time out and return failure if a complete line of input is not
		     read  within  timeout seconds.  timeout may be a decimal number with a frac-
		     tional portion following the decimal point.  This option is  only	effective
		     if  read  is  reading input from a terminal, pipe, or other special file; it
		     has no effect when reading from  regular  files.	If  timeout  is  0,  read
		     returns  success  if  input  is  available on the specified file descriptor,
		     failure otherwise.  The exit status is greater than 128 if  the  timeout  is
		     exceeded.
	      -u fd  Read input from file descriptor fd.

	      If  no  names  are  supplied, the line read is assigned to the variable REPLY.  The
	      return code is zero, unless end-of-file is encountered, read times  out  (in  which
	      case  the  return  code is greater than 128), or an invalid file descriptor is sup-
	      plied as the argument to -u.

       readonly [-aAf] [-p] [name[=word] ...]
	      The given names are marked readonly; the values of these names may not  be  changed
	      by  subsequent assignment.  If the -f option is supplied, the functions correspond-
	      ing to the names are so marked.  The -a option restricts the variables  to  indexed
	      arrays;  the  -A	option	restricts  the	variables to associative arrays.  If both
	      options are supplied, -A takes precedence.  If no name arguments are given,  or  if
	      the  -p  option  is  supplied,  a list of all readonly names is printed.	The other
	      options may be used to restrict the output to a  subset  of  the	set  of  readonly
	      names.   The -p option causes output to be displayed in a format that may be reused
	      as input.  If a variable name is followed by =word, the value of	the  variable  is
	      set  to  word.  The return status is 0 unless an invalid option is encountered, one
	      of the names is not a valid shell variable name, or -f is supplied with a name that
	      is not a function.

       return [n]
	      Causes  a  function to exit with the return value specified by n.  If n is omitted,
	      the return status is that of the last command executed in the  function  body.   If
	      used  outside  a function, but during execution of a script by the .  (source) com-
	      mand, it causes the shell to stop executing that script and return either n or  the
	      exit  status  of	the last command executed within the script as the exit status of
	      the script.  If used outside a function and not during execution of a script by  .,
	      the  return  status  is false.  Any command associated with the RETURN trap is exe-
	      cuted before execution resumes after the function or script.

       set [--abefhkmnptuvxBCEHPT] [-o option-name] [arg ...]
       set [+abefhkmnptuvxBCEHPT] [+o option-name] [arg ...]
	      Without options, the name and value of each shell variable are displayed in a  for-
	      mat  that  can  be reused as input for setting or resetting the currently-set vari-
	      ables.  Read-only variables cannot be reset.  In posix mode, only  shell	variables
	      are  listed.   The  output is sorted according to the current locale.  When options
	      are specified, they set or unset shell attributes.  Any arguments  remaining  after
	      option  processing  are  treated	as  values  for the positional parameters and are
	      assigned, in order, to $1, $2, ...  $n.  Options, if specified, have the	following
	      meanings:
	      -a      Automatically  mark  variables  and functions which are modified or created
		      for export to the environment of subsequent commands.
	      -b      Report the status of terminated background jobs  immediately,  rather  than
		      before the next primary prompt.  This is effective only when job control is
		      enabled.
	      -e      Exit immediately if a pipeline (which may consist of a single  simple  com-
		      mand),   a subshell command enclosed in parentheses, or one of the commands
		      executed as part of a command list enclosed by braces  (see  SHELL  GRAMMAR
		      above)  exits  with a non-zero status.  The shell does not exit if the com-
		      mand that fails is part of the command list immediately following  a  while
		      or until keyword, part of the test following the if or elif reserved words,
		      part of any command executed in a && or || list except the command  follow-
		      ing  the	final && or ||, any command in a pipeline but the last, or if the
		      command's return value is being inverted with !.	A trap on ERR, if set, is
		      executed before the shell exits.	This option applies to the shell environ-
		      ment and each subshell environment separately (see COMMAND EXECUTION  ENVI-
		      RONMENT  above),	and  may cause subshells to exit before executing all the
		      commands in the subshell.
	      -f      Disable pathname expansion.
	      -h      Remember the location of commands as they  are  looked  up  for  execution.
		      This is enabled by default.
	      -k      All  arguments in the form of assignment statements are placed in the envi-
		      ronment for a command, not just those that precede the command name.
	      -m      Monitor mode.  Job control is enabled.  This option is on  by  default  for
		      interactive  shells  on  systems	that  support it (see JOB CONTROL above).
		      Background processes run in a separate process group and a line  containing
		      their exit status is printed upon their completion.
	      -n      Read  commands  but do not execute them.	This may be used to check a shell
		      script for syntax errors.  This is ignored by interactive shells.
	      -o option-name
		      The option-name can be one of the following:
		      allexport
			      Same as -a.
		      braceexpand
			      Same as -B.
		      emacs   Use an emacs-style command line editing interface.  This is enabled
			      by  default  when  the  shell  is  interactive, unless the shell is
			      started with the --noediting option.  This also affects the editing
			      interface used for read -e.
		      errexit Same as -e.
		      errtrace
			      Same as -E.
		      functrace
			      Same as -T.
		      hashall Same as -h.
		      histexpand
			      Same as -H.
		      history Enable  command  history,  as  described above under HISTORY.  This
			      option is on by default in interactive shells.
		      ignoreeof
			      The effect is as if the shell  command  ``IGNOREEOF=10''	had  been
			      executed (see Shell Variables above).
		      keyword Same as -k.
		      monitor Same as -m.
		      noclobber
			      Same as -C.
		      noexec  Same as -n.
		      noglob  Same as -f.
		      nolog   Currently ignored.
		      notify  Same as -b.
		      nounset Same as -u.
		      onecmd  Same as -t.
		      physical
			      Same as -P.
		      pipefail
			      If  set,	the  return  value of a pipeline is the value of the last
			      (rightmost) command to exit with a non-zero status, or zero if  all
			      commands	in  the  pipeline exit successfully.  This option is dis-
			      abled by default.
		      posix   Change the behavior of bash where  the  default  operation  differs
			      from the POSIX standard to match the standard (posix mode).
		      privileged
			      Same as -p.
		      verbose Same as -v.
		      vi      Use  a  vi-style command line editing interface.	This also affects
			      the editing interface used for read -e.
		      xtrace  Same as -x.
		      If -o is supplied with no option-name, the values of  the  current  options
		      are  printed.   If +o is supplied with no option-name, a series of set com-
		      mands to recreate the current option settings is displayed on the  standard
		      output.
	      -p      Turn  on	privileged  mode.  In this mode, the $ENV and $BASH_ENV files are
		      not processed, shell functions are not inherited from the environment,  and
		      the  SHELLOPTS,  BASHOPTS, CDPATH, and GLOBIGNORE variables, if they appear
		      in the environment, are ignored.	If the shell is started with  the  effec-
		      tive  user  (group)  id  not  equal to the real user (group) id, and the -p
		      option is not supplied, these actions are taken and the effective  user  id
		      is  set  to the real user id.  If the -p option is supplied at startup, the
		      effective user id is not reset.  Turning this option off causes the  effec-
		      tive user and group ids to be set to the real user and group ids.
	      -t      Exit after reading and executing one command.
	      -u      Treat  unset variables and parameters other than the special parameters "@"
		      and "*" as an error when performing parameter expansion.	If  expansion  is
		      attempted on an unset variable or parameter, the shell prints an error mes-
		      sage, and, if not interactive, exits with a non-zero status.
	      -v      Print shell input lines as they are read.
	      -x      After expanding each simple command, for command, case command, select com-
		      mand,  or  arithmetic  for command, display the expanded value of PS4, fol-
		      lowed by the command and its expanded arguments or associated word list.
	      -B      The shell performs brace expansion (see Brace Expansion above).  This is on
		      by default.
	      -C      If set, bash does not overwrite an existing file with the >, >&, and <> re-
		      direction operators.  This may be overridden when creating output files  by
		      using the redirection operator >| instead of >.
	      -E      If  set, any trap on ERR is inherited by shell functions, command substitu-
		      tions, and commands executed in a subshell environment.  The  ERR  trap  is
		      normally not inherited in such cases.
	      -H      Enable  !   style  history substitution.	This option is on by default when
		      the shell is interactive.
	      -P      If set, the shell does not follow symbolic links	when  executing  commands
		      such as cd that change the current working directory.  It uses the physical
		      directory structure instead.  By default, bash follows the logical chain of
		      directories when performing commands which change the current directory.
	      -T      If  set,	any  traps  on DEBUG and RETURN are inherited by shell functions,
		      command substitutions, and commands executed  in	a  subshell  environment.
		      The DEBUG and RETURN traps are normally not inherited in such cases.
	      --      If  no  arguments  follow  this  option, then the positional parameters are
		      unset.  Otherwise, the positional parameters are set to the args,  even  if
		      some of them begin with a -.
	      -       Signal  the  end of options, cause all remaining args to be assigned to the
		      positional parameters.  The -x and -v options are turned off.  If there are
		      no args, the positional parameters remain unchanged.

	      The  options  are  off  by  default  unless otherwise noted.  Using + rather than -
	      causes these options to be turned off.  The options can also be specified as  argu-
	      ments  to  an  invocation of the shell.  The current set of options may be found in
	      $-.  The return status is always true unless an invalid option is encountered.

       shift [n]
	      The positional parameters from n+1 ... are renamed to $1	....   Parameters  repre-
	      sented by the numbers $# down to $#-n+1 are unset.  n must be a non-negative number
	      less than or equal to $#.  If n is 0, no parameters  are	changed.   If  n  is  not
	      given,  it  is assumed to be 1.  If n is greater than $#, the positional parameters
	      are not changed.	The return status is greater than zero if n is greater than $# or
	      less than zero; otherwise 0.

       shopt [-pqsu] [-o] [optname ...]
	      Toggle  the  values  of  variables  controlling  optional  shell behavior.  With no
	      options, or with the -p option, a list of all settable options is  displayed,  with
	      an  indication  of  whether  or not each is set.	The -p option causes output to be
	      displayed in a form that may be reused as input.	Other options have the	following
	      meanings:
	      -s     Enable (set) each optname.
	      -u     Disable (unset) each optname.
	      -q     Suppresses  normal  output (quiet mode); the return status indicates whether
		     the optname is set or unset.  If multiple optname arguments are  given  with
		     -q,  the  return status is zero if all optnames are enabled; non-zero other-
		     wise.
	      -o     Restricts the values of optname to be those defined for the -o option to the
		     set builtin.

	      If  either  -s  or  -u is used with no optname arguments, the display is limited to
	      those options which are set or unset, respectively.  Unless  otherwise  noted,  the
	      shopt options are disabled (unset) by default.

	      The  return  status  when listing options is zero if all optnames are enabled, non-
	      zero otherwise.  When setting or unsetting  options,  the  return  status  is  zero
	      unless an optname is not a valid shell option.

	      The list of shopt options is:

	      autocd  If set, a command name that is the name of a directory is executed as if it
		      were the argument to the cd command.  This option is only used by  interac-
		      tive shells.
	      cdable_vars
		      If  set,	an  argument to the cd builtin command that is not a directory is
		      assumed to be the name of a variable whose value is the directory to change
		      to.
	      cdspell If  set, minor errors in the spelling of a directory component in a cd com-
		      mand will be corrected.  The errors checked for are transposed  characters,
		      a missing character, and one character too many.	If a correction is found,
		      the corrected file name is printed, and the command proceeds.  This  option
		      is only used by interactive shells.
	      checkhash
		      If  set,	bash  checks that a command found in the hash table exists before
		      trying to execute it.  If a hashed command no longer exists, a normal  path
		      search is performed.
	      checkjobs
		      If  set, bash lists the status of any stopped and running jobs before exit-
		      ing an interactive shell.  If any jobs are running, this causes the exit to
		      be deferred until a second exit is attempted without an intervening command
		      (see JOB CONTROL above).	The shell always postpones exiting  if	any  jobs
		      are stopped.
	      checkwinsize
		      If  set,	bash checks the window size after each command and, if necessary,
		      updates the values of LINES and COLUMNS.
	      cmdhist If set, bash attempts to save all lines of a multiple-line command  in  the
		      same history entry.  This allows easy re-editing of multi-line commands.
	      compat31
		      If  set,	bash  changes its behavior to that of version 3.1 with respect to
		      quoted arguments to the [[ conditional command's =~ operator.
	      compat32
		      If set, bash changes its behavior to that of version 3.2	with  respect  to
		      locale-specific string comparison when using the [[ conditional command's <
		      and > operators.	Bash versions prior to bash-4.1 use ASCII  collation  and
		      strcmp(3);  bash-4.1  and later use the current locale's collation sequence
		      and strcoll(3).
	      compat40
		      If set, bash changes its behavior to that of version 4.0	with  respect  to
		      locale-specific string comparison when using the [[ conditional command's <
		      and > operators (see previous item) and the effect of interrupting  a  com-
		      mand list.
	      compat41
		      If  set, bash, when in posix mode, treats a single quote in a double-quoted
		      parameter expansion as a special character.  The single quotes  must  match
		      (an  even  number) and the characters between the single quotes are consid-
		      ered quoted.  This is the behavior of posix mode through version 4.1.   The
		      default bash behavior remains as in previous versions.
	      direxpand
		      If  set,	bash  replaces directory names with the results of word expansion
		      when performing filename completion.  This  changes  the	contents  of  the
		      readline	editing  buffer.   If not set, bash attempts to preserve what the
		      user typed.
	      dirspell
		      If set, bash attempts spelling correction on directory  names  during  word
		      completion if the directory name initially supplied does not exist.
	      dotglob If  set,	bash  includes	filenames  beginning with a `.' in the results of
		      pathname expansion.
	      execfail
		      If set, a non-interactive shell will not exit if it cannot execute the file
		      specified as an argument to the exec builtin command.  An interactive shell
		      does not exit if exec fails.
	      expand_aliases
		      If set, aliases are expanded as described above under ALIASES.  This option
		      is enabled by default for interactive shells.
	      extdebug
		      If set, behavior intended for use by debuggers is enabled:
		      1.     The  -F  option to the declare builtin displays the source file name
			     and line number corresponding to each function name supplied  as  an
			     argument.
		      2.     If  the  command run by the DEBUG trap returns a non-zero value, the
			     next command is skipped and not executed.
		      3.     If the command run by the DEBUG trap returns a value of 2,  and  the
			     shell  is	executing  in  a  subroutine (a shell function or a shell
			     script executed by the . or source builtins), a call  to  return  is
			     simulated.
		      4.     BASH_ARGC	and  BASH_ARGV are updated as described in their descrip-
			     tions above.
		      5.     Function tracing is enabled:  command substitution, shell functions,
			     and  subshells invoked with ( command ) inherit the DEBUG and RETURN
			     traps.
		      6.     Error tracing is enabled:	command  substitution,	shell  functions,
			     and subshells invoked with ( command ) inherit the ERR trap.
	      extglob If  set, the extended pattern matching features described above under Path-
		      name Expansion are enabled.
	      extquote
		      If set, $'string' and $"string" quoting is  performed  within  ${parameter}
		      expansions enclosed in double quotes.  This option is enabled by default.
	      failglob
		      If  set,	patterns  which fail to match filenames during pathname expansion
		      result in an expansion error.
	      force_fignore
		      If set, the suffixes specified by the FIGNORE shell variable cause words to
		      be  ignored  when  performing word completion even if the ignored words are
		      the only possible completions.  See SHELL VARIABLES above for a description
		      of FIGNORE.  This option is enabled by default.
	      globstar
		      If  set, the pattern ** used in a pathname expansion context will match all
		      files and zero or more directories and subdirectories.  If the  pattern  is
		      followed by a /, only directories and subdirectories match.
	      gnu_errfmt
		      If  set, shell error messages are written in the standard GNU error message
		      format.
	      histappend
		      If set, the history list is appended to the file named by the value of  the
		      HISTFILE variable when the shell exits, rather than overwriting the file.
	      histreedit
		      If  set, and readline is being used, a user is given the opportunity to re-
		      edit a failed history substitution.
	      histverify
		      If set, and readline is being used, the results of history substitution are
		      not immediately passed to the shell parser.  Instead, the resulting line is
		      loaded into the readline editing buffer, allowing further modification.
	      hostcomplete
		      If set, and readline is being used, bash will attempt to	perform  hostname
		      completion  when	a  word containing a @ is being completed (see Completing
		      under READLINE above).  This is enabled by default.
	      huponexit
		      If set, bash will send SIGHUP to all jobs when an interactive  login  shell
		      exits.
	      interactive_comments
		      If  set, allow a word beginning with # to cause that word and all remaining
		      characters on that line to be ignored in an interactive shell (see COMMENTS
		      above).  This option is enabled by default.
	      lastpipe
		      If set, and job control is not active, the shell runs the last command of a
		      pipeline not executed in the background in the current shell environment.
	      lithist If set, and the cmdhist option is enabled, multi-line commands are saved to
		      the  history  with embedded newlines rather than using semicolon separators
		      where possible.
	      login_shell
		      The shell sets this option if it is started as a login shell  (see  INVOCA-
		      TION above).  The value may not be changed.
	      mailwarn
		      If  set,	and a file that bash is checking for mail has been accessed since
		      the last time it was checked, the message ``The mail in mailfile	has  been
		      read'' is displayed.
	      no_empty_cmd_completion
		      If  set,	and  readline  is being used, bash will not attempt to search the
		      PATH for possible completions when completion  is  attempted  on	an  empty
		      line.
	      nocaseglob
		      If  set, bash matches filenames in a case-insensitive fashion when perform-
		      ing pathname expansion (see Pathname Expansion above).
	      nocasematch
		      If set, bash matches patterns in a case-insensitive fashion when performing
		      matching while executing case or [[ conditional commands.
	      nullglob
		      If  set,	bash allows patterns which match no files (see Pathname Expansion
		      above) to expand to a null string, rather than themselves.
	      progcomp
		      If set, the programmable completion facilities (see Programmable Completion
		      above) are enabled.  This option is enabled by default.
	      promptvars
		      If  set,	prompt strings undergo parameter expansion, command substitution,
		      arithmetic expansion, and quote removal after being expanded  as	described
		      in PROMPTING above.  This option is enabled by default.
	      restricted_shell
		      The  shell  sets	this  option  if  it  is  started in restricted mode (see
		      RESTRICTED SHELL below).	The value may not be changed.  This is not  reset
		      when the startup files are executed, allowing the startup files to discover
		      whether or not a shell is restricted.
	      shift_verbose
		      If set, the shift builtin prints an error  message  when	the  shift  count
		      exceeds the number of positional parameters.
	      sourcepath
		      If set, the source (.) builtin uses the value of PATH to find the directory
		      containing the file supplied as an argument.  This  option  is  enabled  by
		      default.
	      xpg_echo
		      If set, the echo builtin expands backslash-escape sequences by default.

       suspend [-f]
	      Suspend  the  execution  of this shell until it receives a SIGCONT signal.  A login
	      shell cannot be suspended; the -f option can be used to override this and force the
	      suspension.  The return status is 0 unless the shell is a login shell and -f is not
	      supplied, or if job control is not enabled.

       test expr
       [ expr ]
	      Return a status of 0 or 1 depending on the evaluation of the conditional expression
	      expr.  Each operator and operand must be a separate argument.  Expressions are com-
	      posed of the primaries described above under CONDITIONAL	EXPRESSIONS.   test  does
	      not accept any options, nor does it accept and ignore an argument of -- as signify-
	      ing the end of options.

	      Expressions may be combined using the following  operators,  listed  in  decreasing
	      order of precedence.  The evaluation depends on the number of arguments; see below.
	      Operator precedence is used when there are five or more arguments.
	      ! expr True if expr is false.
	      ( expr )
		     Returns the value of expr.  This may be used to override the  normal  prece-
		     dence of operators.
	      expr1 -a expr2
		     True if both expr1 and expr2 are true.
	      expr1 -o expr2
		     True if either expr1 or expr2 is true.

	      test  and [ evaluate conditional expressions using a set of rules based on the num-
	      ber of arguments.

	      0 arguments
		     The expression is false.
	      1 argument
		     The expression is true if and only if the argument is not null.
	      2 arguments
		     If the first argument is !, the expression is true if and only if the second
		     argument  is  null.   If  the first argument is one of the unary conditional
		     operators listed above under CONDITIONAL EXPRESSIONS, the expression is true
		     if  the unary test is true.  If the first argument is not a valid unary con-
		     ditional operator, the expression is false.
	      3 arguments
		     The following conditions are applied in the order	listed.   If  the  second
		     argument  is one of the binary conditional operators listed above under CON-
		     DITIONAL EXPRESSIONS, the result of the expression  is  the  result  of  the
		     binary  test using the first and third arguments as operands.  The -a and -o
		     operators are considered binary operators when there  are	three  arguments.
		     If  the  first  argument is !, the value is the negation of the two-argument
		     test using the second and third arguments.  If the first argument is exactly
		     (	and  the third argument is exactly ), the result is the one-argument test
		     of the second argument.  Otherwise, the expression is false.
	      4 arguments
		     If the first argument is !, the result is the negation of the three-argument
		     expression  composed  of the remaining arguments.	Otherwise, the expression
		     is parsed and evaluated according	to  precedence	using  the  rules  listed
		     above.
	      5 or more arguments
		     The  expression  is  parsed  and evaluated according to precedence using the
		     rules listed above.

	      When used with test or [, the < and > operators sort lexicographically using  ASCII
	      ordering.

       times  Print  the  accumulated  user  and system times for the shell and for processes run
	      from the shell.  The return status is 0.

       trap [-lp] [[arg] sigspec ...]
	      The command arg is to be read  and  executed  when  the  shell  receives	signal(s)
	      sigspec.	 If  arg  is  absent (and there is a single sigspec) or -, each specified
	      signal is reset to its original disposition (the value it had upon entrance to  the
	      shell).	If arg is the null string the signal specified by each sigspec is ignored
	      by the shell and by the commands it invokes.  If arg is not present and -p has been
	      supplied, then the trap commands associated with each sigspec are displayed.  If no
	      arguments are supplied or if only -p is given, trap prints  the  list  of  commands
	      associated  with	each  signal.	The -l option causes the shell to print a list of
	      signal names and their corresponding numbers.  Each sigspec is either a signal name
	      defined  in  <signal.h>, or a signal number.  Signal names are case insensitive and
	      the SIG prefix is optional.

	      If a sigspec is EXIT (0) the command arg is executed on exit from the shell.  If	a
	      sigspec is DEBUG, the command arg is executed before every simple command, for com-
	      mand, case command, select command, every arithmetic for command,  and  before  the
	      first command executes in a shell function (see SHELL GRAMMAR above).  Refer to the
	      description of the extdebug option to the shopt builtin for details of  its  effect
	      on the DEBUG trap.  If a sigspec is RETURN, the command arg is executed each time a
	      shell function or a script executed with the . or source builtins finishes  execut-
	      ing.

	      If  a  sigspec  is ERR, the command arg is executed whenever a simple command has a
	      non-zero exit status, subject to the following conditions.  The  ERR  trap  is  not
	      executed	if the failed command is part of the command list immediately following a
	      while or until keyword, part of the test in an if statement, part of a command exe-
	      cuted in a && or || list, or if the command's return value is being inverted via !.
	      These are the same conditions obeyed by the errexit option.

	      Signals ignored upon entry to  the  shell  cannot  be  trapped,  reset  or  listed.
	      Trapped  signals that are not being ignored are reset to their original values in a
	      subshell or subshell environment when one is created.  The return status	is  false
	      if any sigspec is invalid; otherwise trap returns true.

       type [-aftpP] name [name ...]
	      With  no	options, indicate how each name would be interpreted if used as a command
	      name.  If the -t option is used, type prints a string which is one of  alias,  key-
	      word,  function,	builtin,  or file if name is an alias, shell reserved word, func-
	      tion, builtin, or disk file, respectively.  If the name is not found, then  nothing
	      is  printed,  and  an  exit status of false is returned.	If the -p option is used,
	      type either returns the name of the disk file that would be executed if  name  were
	      specified  as a command name, or nothing if ``type -t name'' would not return file.
	      The -P option forces a PATH search for each name, even if ``type	-t  name''  would
	      not  return  file.   If  a command is hashed, -p and -P print the hashed value, not
	      necessarily the file that appears first in PATH.	If the -a option  is  used,  type
	      prints  all  of  the  places  that contain an executable named name.  This includes
	      aliases and functions, if and only if the -p option is not also used.  The table of
	      hashed  commands	is  not  consulted when using -a.  The -f option suppresses shell
	      function lookup, as with the command builtin.  type returns  true  if  all  of  the
	      arguments are found, false if any are not found.

       ulimit [-HSTabcdefilmnpqrstuvx [limit]]
	      Provides control over the resources available to the shell and to processes started
	      by it, on systems that allow such control.  The -H and -S options specify that  the
	      hard or soft limit is set for the given resource.  A hard limit cannot be increased
	      by a non-root user once it is set; a soft limit may be increased up to the value of
	      the  hard  limit.  If neither -H nor -S is specified, both the soft and hard limits
	      are set.	The value of limit can be a number in the unit specified for the resource
	      or  one of the special values hard, soft, or unlimited, which stand for the current
	      hard limit, the current soft limit, and no limit, respectively.  If limit is  omit-
	      ted,  the current value of the soft limit of the resource is printed, unless the -H
	      option is given.	When more than one resource is specified, the limit name and unit
	      are printed before the value.  Other options are interpreted as follows:
	      -a     All current limits are reported
	      -b     The maximum socket buffer size
	      -c     The maximum size of core files created
	      -d     The maximum size of a process's data segment
	      -e     The maximum scheduling priority ("nice")
	      -f     The maximum size of files written by the shell and its children
	      -i     The maximum number of pending signals
	      -l     The maximum size that may be locked into memory
	      -m     The maximum resident set size (many systems do not honor this limit)
	      -n     The  maximum number of open file descriptors (most systems do not allow this
		     value to be set)
	      -p     The pipe size in 512-byte blocks (this may not be set)
	      -q     The maximum number of bytes in POSIX message queues
	      -r     The maximum real-time scheduling priority
	      -s     The maximum stack size
	      -t     The maximum amount of cpu time in seconds
	      -u     The maximum number of processes available to a single user
	      -v     The maximum amount of virtual memory available to the  shell  and,  on  some
		     systems, to its children
	      -x     The maximum number of file locks
	      -T     The maximum number of threads

	      If  limit is given, it is the new value of the specified resource (the -a option is
	      display only).  If no option is given, then -f is assumed.  Values are in 1024-byte
	      increments,  except  for -t, which is in seconds, -p, which is in units of 512-byte
	      blocks, and -T, -b, -n, and -u, which are unscaled values.  The return status is	0
	      unless  an invalid option or argument is supplied, or an error occurs while setting
	      a new limit.

       umask [-p] [-S] [mode]
	      The user file-creation mask is set to mode.  If mode begins with	a  digit,  it  is
	      interpreted as an octal number; otherwise it is interpreted as a symbolic mode mask
	      similar to that accepted by chmod(1).  If mode is omitted, the current value of the
	      mask is printed.	The -S option causes the mask to be printed in symbolic form; the
	      default output is an octal number.  If the -p option is supplied, and mode is omit-
	      ted,  the  output is in a form that may be reused as input.  The return status is 0
	      if the mode was successfully changed or if no mode argument was supplied, and false
	      otherwise.

       unalias [-a] [name ...]
	      Remove  each  name  from the list of defined aliases.  If -a is supplied, all alias
	      definitions are removed.	The return value is true unless a supplied name is not	a
	      defined alias.

       unset [-fv] [name ...]
	      For  each  name,	remove the corresponding variable or function.	If no options are
	      supplied, or the -v option is given, each name refers to a shell	variable.   Read-
	      only  variables  may not be unset.  If -f is specified, each name refers to a shell
	      function, and the function definition is removed.  Each unset variable or  function
	      is  removed  from  the  environment  passed  to  subsequent  commands.   If  any of
	      COMP_WORDBREAKS, RANDOM, SECONDS, LINENO, HISTCMD, FUNCNAME,  GROUPS,  or  DIRSTACK
	      are unset, they lose their special properties, even if they are subsequently reset.
	      The exit status is true unless a name is readonly.

       wait [n ...]
	      Wait for each specified process and return its termination status.  Each n may be a
	      process  ID  or  a job specification; if a job spec is given, all processes in that
	      job's pipeline are waited for.  If n is not given, all currently active child  pro-
	      cesses  are  waited for, and the return status is zero.  If n specifies a non-exis-
	      tent process or job, the return status is 127.  Otherwise, the return status is the
	      exit status of the last process or job waited for.

RESTRICTED SHELL
       If  bash  is  started with the name rbash, or the -r option is supplied at invocation, the
       shell becomes restricted.  A restricted shell is used to set up an environment  more  con-
       trolled	than  the standard shell.  It behaves identically to bash with the exception that
       the following are disallowed or not performed:

       o      changing directories with cd

       o      setting or unsetting the values of SHELL, PATH, ENV, or BASH_ENV

       o      specifying command names containing /

       o      specifying a file name containing a / as an argument to the .  builtin command

       o      specifying a filename containing a slash as an argument to the  -p  option  to  the
	      hash builtin command

       o      importing function definitions from the shell environment at startup

       o      parsing the value of SHELLOPTS from the shell environment at startup

       o      redirecting output using the >, >|, <>, >&, &>, and >> redirection operators

       o      using the exec builtin command to replace the shell with another command

       o      adding  or  deleting  builtin  commands  with  the  -f and -d options to the enable
	      builtin command

       o      using the enable builtin command to enable disabled shell builtins

       o      specifying the -p option to the command builtin command

       o      turning off restricted mode with set +r or set +o restricted.

       These restrictions are enforced after any startup files are read.

       When a command that is found to be a shell  script  is  executed  (see  COMMAND	EXECUTION
       above), rbash turns off any restrictions in the shell spawned to execute the script.

SEE ALSO
       Bash Reference Manual, Brian Fox and Chet Ramey
       The Gnu Readline Library, Brian Fox and Chet Ramey
       The Gnu History Library, Brian Fox and Chet Ramey
       Portable Operating System Interface (POSIX) Part 2: Shell and Utilities, IEEE
       sh(1), ksh(1), csh(1)
       emacs(1), vi(1)
       readline(3)

FILES
       /bin/bash
	      The bash executable
       /etc/profile
	      The systemwide initialization file, executed for login shells
       /etc/bash.bash_logout
	      The systemwide login shell cleanup file, executed when a login shell exits
       ~/.bash_profile
	      The personal initialization file, executed for login shells
       ~/.bashrc
	      The individual per-interactive-shell startup file
       ~/.bash_logout
	      The individual login shell cleanup file, executed when a login shell exits
       ~/.inputrc
	      Individual readline initialization file

AUTHORS
       Brian Fox, Free Software Foundation
       bfox@gnu.org

       Chet Ramey, Case Western Reserve University
       chet.ramey@case.edu

BUG REPORTS
       If  you find a bug in bash, you should report it.  But first, you should make sure that it
       really is a bug, and that it appears in the latest version of bash.  The latest version is
       always available from ftp://ftp.gnu.org/pub/gnu/bash/.

       Once  you  have	determined  that a bug actually exists, use the bashbug command (from the
       source package) to submit a bug report.	If you have a fix, you	are  encouraged  to  mail
       that  as  well!	 Suggestions  and  `philosophical'  bug  reports  may  be  mailed to bug-
       bash@gnu.org or posted to the Usenet newsgroup gnu.bash.bug.

       ALL bug reports should include:

       The version number of bash
       The hardware and operating system
       The compiler used to compile
       A description of the bug behaviour
       A short script or `recipe' which exercises the bug

       Comments  and  bug  reports  concerning	this  manual   page   should   be   directed   to
       chet.ramey@case.edu.

BUGS
       It's too big and too slow.

       There  are  some  subtle  differences  between bash and traditional versions of sh, mostly
       because of the POSIX specification.

       Aliases are confusing in some uses.

       Shell builtin commands and functions are not stoppable/restartable.

       Compound commands and command sequences of the form `a ; b ; c' are not handled gracefully
       when  process  suspension  is attempted.  When a process is stopped, the shell immediately
       executes the next command in the sequence.  It suffices to place the sequence of  commands
       between parentheses to force it into a subshell, which may be stopped as a unit.

       Array variables may not (yet) be exported.

       There may be only one active coprocess at a time.

GNU Bash-4.2				 2010 December 28				  BASH(1)
Unix & Linux Commands & Man Pages : ©2000 - 2018 Unix and Linux Forums


All times are GMT -4. The time now is 06:06 AM.