How to delete everything present on left (or right) of a substring?
Hello,
I have list of lines from which i am trying to pick a sub string and want to put that into a csv file, the sub string i want to extract is at the middle of the line, i was wondering how can i delete everything that is present left/right of a sub string. I have tried sed, cut and awk, but i couldn't get desired results.
Below are few lines, from which i am trying to pick PXCNUMBER_1 and append them to a csv file.
using awk and cut i got this result, due to some inconsistency in the lines i failed to pick the PXCNUMBERS_1, precisely as you could see there is MSGS_ in the last line before PXCNUMBERS_1 .
Desired results are
I know i could use sed to replace MSGS in the last line to empty, but there are more lines than i have showed above, and i was also curious to know if there is any command to cut everything left/right of a sub string. any pointers would be great help
I have a script which loop through a directory then report any file matches the given pattern,
say, the pattern is "a2006", this file would be returned
a20061101.txt
I would like to know how can I get the remaining of the filename, so
a20061101txt - a2006 = 1101.txt
Can anybody help? Thank... (2 Replies)
hi
i have a file which is like this :
aab ghj
ghj lsklk
lklkl;
ashjd
kjs
alskj
How do i remove the spaces from the beginning of a line so that all lines are indented to the left? (1 Reply)
Hi all,
A very strange problem I have this morning with my Solaris 8.
I have a FS full, I deleted some files but the system doesn't seems to reallocate the free space (I'm using Veritas):
df -k :
/dev/vx/dsk/dlds02vg/dlds02oralv 4194304 4194304 0 100% /dlds02/lds/oracle
... (4 Replies)
HI,
if a String is present in file1.txt, i want to delete that String from file2.txt.
How can i do this??
I am sure that the file1.txt is a subset of file2.txt. (2 Replies)
I am passing input string,length, and the pad character.
input string=123
Pad char=#
Length=6
then the output should be:
###123
How we can do this?
Thanks (5 Replies)
I have two files
File1
====
1|2000-00-00|2010-02-02||
2| 00:00:00|2012-02-24||
3|2000-00-00|2011-02-02||
File2
====
2000-00-00
00:00:00
I want the delete the patterns which are found in file 2 from file 1,
Expected output:
File1
==== (5 Replies)
Need unix commands to delete records from one file if the same record present in another file...
just like join ... if the record present in both files.. delete from first file or delete the particular record and write the unmatched records to new file..
tried with grep and while... (6 Replies)
Hi guys,
I need to use awk to join 2 files
file_1
A 001
B 002
C 003
file_2
A XX1
B XX2
output desired
A 001 XX1
B 002 missing
C 003 XX2
thank you! (2 Replies)
here is what i want to achieve.. i have a file with below contents
cat fileName
blah blah blah
.
.DROP this
REJECT that
.
--sport 7800 -j REJECT --reject-with icmp-port-unreachable
--dport 7800 -j REJECT --reject-with icmp-port-unreachable
.
.
.
more blah blah blah
--dport 3306... (14 Replies)
I know that it is possible to login into the HMC console and view all the specs like, how much CPU/RAM every LPAR has.
But how can I check how much the whole P7 has in total and how much is left to creat a new LPAR:wall: (5 Replies)
Discussion started by: DiViN3
5 Replies
LEARN ABOUT OPENSOLARIS
cut
cut(1) User Commands cut(1)NAME
cut - cut out selected fields of each line of a file
SYNOPSIS
cut -b list [-n] [file]...
cut -c list [file]...
cut -f list [-d delim] [-s] [file]...
DESCRIPTION
Use the cut utility to cut out columns from a table or fields from each line of a file; in data base parlance, it implements the projection
of a relation. The fields as specified by list can be fixed length, that is, character positions as on a punched card (-c option) or the
length can vary from line to line and be marked with a field delimiter character like TAB (-f option). cut can be used as a filter.
Either the -b, -c, or -f option must be specified.
Use grep(1) to make horizontal ``cuts'' (by context) through a file, or paste(1) to put files together column-wise (that is, horizontally).
To reorder columns in a table, use cut and paste.
OPTIONS
The following options are supported:
list A comma-separated or blank-character-separated list of integer field numbers (in increasing order), with optional - to indi-
cate ranges (for instance, 1,4,7; 1-3,8; -5,10 (short for 1-5,10); or 3- (short for third through last field)).
-b list The list following -b specifies byte positions (for instance, -b1-72 would pass the first 72 bytes of each line). When -b and
-n are used together, list is adjusted so that no multi-byte character is split.
-c list The list following -c specifies character positions (for instance, -c1-72 would pass the first 72 characters of each line).
-d delim The character following -d is the field delimiter (-f option only). Default is tab. Space or other characters with special
meaning to the shell must be quoted. delim can be a multi-byte character.
-f list The list following -f is a list of fields assumed to be separated in the file by a delimiter character (see -d ); for
instance, -f1,7 copies the first and seventh field only. Lines with no field delimiters will be passed through intact (useful
for table subheadings), unless -s is specified.
-n Do not split characters. When -b list and -n are used together, list is adjusted so that no multi-byte character is split.
-s Suppresses lines with no delimiter characters in case of -f option. Unless specified, lines with no delimiters will be passed
through untouched.
OPERANDS
The following operands are supported:
file A path name of an input file. If no file operands are specified, or if a file operand is -, the standard input will be used.
USAGE
See largefile(5) for the description of the behavior of cut when encountering files greater than or equal to 2 Gbyte (2^31 bytes).
EXAMPLES
Example 1 Mapping user IDs
A mapping of user IDs to names follows:
example% cut -d: -f1,5 /etc/passwd
Example 2 Setting current login name
To set name to current login name:
example$ name=`who am i | cut -f1 -d' '`
ENVIRONMENT VARIABLES
See environ(5) for descriptions of the following environment variables that affect the execution of cut: LANG, LC_ALL, LC_CTYPE, LC_MES-
SAGES, and NLSPATH.
EXIT STATUS
The following exit values are returned:
0 All input files were output successfully.
>0 An error occurred.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
|CSI |Enabled |
+-----------------------------+-----------------------------+
|Interface Stability |Standard |
+-----------------------------+-----------------------------+
SEE ALSO grep(1), paste(1), attributes(5), environ(5), largefile(5), standards(5)DIAGNOSTICS
cut: -n may only be used with -b
cut: -d may only be used with -f
cut: -s may only be used with -f
cut: cannot open <file>
Either file cannot be read or does not exist. If multiple files are present, processing continues.
cut: no delimiter specified
Missing delim on -d option.
cut: invalid delimiter
cut: no list specified
Missing list on -b, -c, or -f option.
cut: invalid range specifier
cut: too many ranges specified
cut: range must be increasing
cut: invalid character in range
cut: internal error processing input
cut: invalid multibyte character
cut: unable to allocate enough memory
SunOS 5.11 29 Apr 1999 cut(1)