It is possible to install Solaris Cluster on ESXI host ?
I try many time to install and configure Solaris Cluster on ESXI, but i received the same transport error between. When i set manuel private (net1,net2) ip config i have ping between nodes.
Quote:
"Probes were sent out from all transport adapters configured for this
node ("node1"). But, they were not seen by any of the other nodes.
This may be due to any number of reasons, including improper cabling
or a switch which was confused by the probes.
You can either attempt to correct the problem and try the probes again or manually configure the transport.
on ESXI i created vSwitch1 (net1/net1) / vSwitch2 (net2/net2)
After much hitting my head to the wall with this meesages
root@crasher /workzone/dvd4_sfb-sol_x64]#./installer -verbose -installonly
5.0MP3 Installation Program
Copyright (c) 2008 Symantec Corporation. All rights reserved. Symantec, the Symantec... (1 Reply)
Greetings Forumers!
I tried installing Solaris Cluster 3.3 today. I should say I tried configuring the Cluster today. The software is already installed on two systems. I am trying to configure a shared filesystem between two 6320 Blades. I selected the "Custom" install because the "Typical"... (2 Replies)
Anybody have any ideas on what could be causing this crash? This an x86 virtual machine I have running in ESXi at my house, so obviously no way to send the data to Oracle for analysis. Just curious if anyone has any ideas. I suspect motherboard problems with the x86 hardware, as I already... (4 Replies)
how do I remote install a vib on 200 esxi hosts ?
I need to ssh into the host
run this command
esxcli software vib install -v /tmp/vib --no-sig-check (1 Reply)
Hi
i have 2 esxi. one is amd based cpu and the other is intel based cpu.
i have a redhat linux machine that was created in amd cpu esxi, now i need to migrate it (powered off) to INTEL based esxi. will the redhat machine will be OK with that?
Thanks (2 Replies)
Hi All,
Can any one Explain Me Step by Step installing SCO 5.0.7v in ESXi 6.0 ??
When i was trying to install its is not booting into operating systems !!
showing an error no operating systems in media !!
Thanks in Advance!! Please take some time in helping me !!
Kanthi Kiran K (3 Replies)
Tl;dr Solaris 11.4 won't boot on 2 machines because of what I believe is network issues. Need to know where I can find more info to troubleshoot.
I have two Solaris 11.4 systems running on VMware ESXi 6.5u2, which have suddenly (and seemingly for no reason) started boot-looping.
Both of... (2 Replies)
Discussion started by: rking267
2 Replies
LEARN ABOUT OPENSOLARIS
scconf_transp_adap_bge
scconf_transp_adap_bge(1M) System Administration Commands scconf_transp_adap_bge(1M)NAME
scconf_transp_adap_bge - configure the bge transport adapter
DESCRIPTION
Note -
Beginning with the Sun Cluster 3.2 release, Sun Cluster software includes an object-oriented command set. Although Sun Cluster software
still supports the original command set, Sun Cluster procedural documentation uses only the object-oriented command set. For more infor-
mation about the object-oriented command set, see the Intro(1CL) man page.
You can configure bge adapters as cluster transport adapters. These adapters can only be used with the dlpi transport type. The bge adapter
is VLAN capable.
The bge adapter connects to a transport switch or to another bge adapter on a different node. In either case, the connection is made
through a transport cable.
When a transport switch is used and the endpoints of the transport cable are configured by using the scconf command, the scinstall command,
or other tools, you are asked to specify a port name on the transport switch. You can provide any port name, or accept the default, as long
as the name is unique for the switch.
The default is to set the port name to the node ID hosting the adapter at the other end of the cable.
There are no user configurable properties for cluster transport adapters of this type.
SEE ALSO Intro(1CL), clinterconnect(1CL), clnode(1CL), scconf(1M), scinstall(1M), bge(7D)Sun Cluster 3.2 4 May 2006 scconf_transp_adap_bge(1M)