Hi...
question is this:
How do I mount an LVD hotswap scsi drive in bay #2 on a netra using the mount command? volmgt doesn't seem to mount it and/or I don't know how to view the drives data if it's formatted which it may not be. This drive is not new out of the box so I'm not sure.
... (4 Replies)
I have Pentium 4 CPU with 3 GHZ
500MB of RAM w/ 120 GB of HDD space. I am trying to install Sun Solaris 9 (x86).
I saw somewhere to on-line to get Device Configuration Assistant, but I am not sure where or if you guys have any documentations on this issue.
This is the error I am getting:
... (1 Reply)
I umount one filesystem like this:
# umount -F /export/home1
Then I tried to mount it back as:
# mount /dev/dsk/c1t0d0s6 /export/home1
mount: I/O error
mount: cannot mount /dev/dsk/c1t0d0s6
partition /dev/dsk/c1t0d0s6 and directory /export/home1 all exist in the system. Why can I not... (5 Replies)
Hello,
I am trying to mount an external USB drive connected to a SnapServer 410 ( a network file server running a linux OS called Guardian OS).
THanks to some articles on the the web, I found that I needed to use the following command:
> mount -t vfat /dev/sde /mnt/usbext
... (7 Replies)
hi when i am trying to mount this newly created LV i get following error
/#mount /bancs_cards
Replaying log for /dev/lvbancscards.
mount: 0506-324 Cannot mount /dev/lvbancscards on /bancs_cards: The media is not formatted or the format is not correct.
/#lslv lvbancscards
LOGICAL VOLUME: ... (3 Replies)
hi all,
I been trying to use mount command to unzip iso file. here is the command im using
mount -t iso9660 -o loop file.iso /mnt/cdrom
then i get below error..
mount: wrong fs type, bad option, bad superblock on /dev/loop1,
missing codepage or other error
In some cases... (1 Reply)
I am having trouble mounting with cifs, but mounting the exact same command with smbfs works fine. The share is on another samba server and is set to full public guest access. # mount -t cifs //servername/sharename /mnt/temp -o password=""
mount error 13 = Permission denied Refer to the... (3 Replies)
I dualboot Ubuntu and Fedora in one hard drive. Below are the scenario.
First, installed Ubuntu 10.4 on the entire disk (40GiB of size).
Then, shrink the Ubuntu installation to equal size to free up space for fedora.
Second, installed Fedora 13 using the option "Use free space on selected... (2 Replies)
I am trying to set a share between windows and an AIX server. I was able to do this to a windows 2008 server. I am now trying to get this to worked on a windows 7 enterprise pc. below is what i get. I have turned off the firewall wall in windows the user is an admin in the pc. same account works... (6 Replies)
hi
i have an android phone which i think is bricked, so wanted to see what the actual issue is, I flashed it with TWRP recovery image and launched terminal i, was able understand that mount is not happening, it says invalid argument and no such file or directory. Below is what i get while... (32 Replies)
Discussion started by: nanz143
32 Replies
LEARN ABOUT SUSE
irsend
IRSEND(1) FSF IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.8.7pre1 May 2010 IRSEND(1)