07-27-2019
hicksd8, jgt.
Many thanks for the replies.
I'll try the hpsa BTLD and return with the outcome. Incidentally I see there is also an hpsas. Any idea what the difference is?
--- Post updated at 02:49 PM ---
Ok, I give up.
Can anyone tell me where I can find the BTLD downloads for either hpsa ore hpsas?
I see that someone mentions that it is part of an EFS 5.770a tar file. Problem is that I don't have a Unix server to process a tar file until I build this server. Catch-22. A simple BTLD image file would be great.
10 More Discussions You Might Find Interesting
1. SCO
I am facing a problem to install sco 5.0.6 in Dell Power Edge SC1420 which raid controller is ultra 320 scsi raid controller .
how/from where to download the ultra 320 scsi raid controller driver for sco 5.0.6.
Plz help with any idea
karzon (1 Reply)
Discussion started by: karzon
1 Replies
2. SCO
recently we have purchased hp proliant ml350 g5 server and configured raid 5 with hp smartarray p200i sas controller.but i could not found any sas raid controller hp smartarry p200i driver for sco unix 5.0.7 :(.i searched on hp support site,but no use.any one can help. (3 Replies)
Discussion started by: prakrithi
3 Replies
3. UNIX for Dummies Questions & Answers
Trying to install Openserver 6.0 on this server which has an integrated Smart Array P400.
Install halts with the message .......
"Incorrect Disk Partitioning .........................."
I havent yet got to the "divvy" and disk partitioning section of the install section so I am... (2 Replies)
Discussion started by: farmacy
2 Replies
4. SCO
I'm "attempting" to install SCO 5.0.7 on an HP ML370 G4 server and am ready to bash the keyboard with head now. I keep getting the error message "WARNING hd: no root disk controller found" when running the bootable install cd.
I have a raid 5 array with an online spare created using 4 36.3 GB... (2 Replies)
Discussion started by: FrictionBurn
2 Replies
5. SCO
This is my first load of SCO OpenServer v5.0.7 on a HP ProLiant ML350 G6. When it asks me to identify the source media it can't find it no matter how I respond. The SCO compatible page says it used the on board SATA DVD-ROM on Port 2 of the embedded SATA controller with "Legacy IDE emulation (as... (8 Replies)
Discussion started by: farmboy
8 Replies
6. SCO
So today I tried to upgrade a customer from a Proliant with an HPSAS controller to an Intel server with a MEGASAS controller.
First, I downloaded the megasas driver from SCO and installed it on the old system.
Then I created a new Microlite Edge emergency boot cd with the new driver on it.
I... (2 Replies)
Discussion started by: jgt
2 Replies
7. Debian
Hello,
I have a few questions about this server.
It has two CPU's 3.20 ghz / 800 mhz / 1MB L2
5120 MB RAM
6 hard disks on HP Smart Array 6i controller (36.4 GB Ultra320 SCSI HD each)
RAID set to RAID 5 (5 discs) with one spare (6th disk)
USB, 2 Ethernet ports, 1 ILO port, 1 SCSI port
... (2 Replies)
Discussion started by: Marcus Aurelius
2 Replies
8. SCO
Installing SCO UNIX 507 on Dell Poweredge T610. It has no floppy so I downloaded the BTLD onto CD from SCO site to load without floppy drive. BTLD loads ok. when i get to the Media to be used, no matter what option i chose i get the error: No controller for device you have chosen. During bootup you... (9 Replies)
Discussion started by: romanglad112
9 Replies
9. SCO
Hello
I'm trying to virtualize an instance of Sco Unix 5.0.5 in VirtualBox (called VM-A) , but sco I have problems set to launch with the new raid controller .
The physical machine has a raid controller adaptec (alad driver) but VirtualBox uses buslogic (blc driver)
What ... (3 Replies)
Discussion started by: flako
3 Replies
10. SCO
Hi all,
A client has an SCO OpenServer Server 6.0, that is running on an HP ProLiant Box and they lost the root password.
Its equipped with a Doal-Core Intel Pentium Processor. They don't have any media or emergency disk anymore.
I tried to boot with the CD Rom, then "Tools", then exit to... (7 Replies)
Discussion started by: thm2222
7 Replies
LEARN ABOUT DEBIAN
splitdns323fw
SPLITDNS323FW(1) User Commands SPLITDNS323FW(1)
NAME
splitdns323fw - extract data from DNS-323 (and other) firmware images
SYNOPSIS
splitdns323fw [-k KERNEL] [-i INITRD] [-d DEFAULTS] firmwarefile
DESCRIPTION
splitdns323fw parses an existing firmware image for a device such as the D-Link DNS-323, DNS-321, and Conceptronics CH3SNAS.
By default, if only the firmwarefile (R)option is given, the script verifies the checksums of the included components and prints a bunch of
useful info about the image. If you specify one or more of the other options, however, the corresponding section of the firmware image
will be written to that file.
-k kernel, --kernel=kernel
Write the kernel part of the firmware image to the specified file.
-i initrd, --initrd=initrd
Write the initrd part of the firmware image to the specified file.
-d defaults.tar.gz, --defaults=defaults.tar.gz
Write the defaults part of the firmware image to the specified file.
BUGS
E-mail bug reports to theshed+dns323-firmware-tools@hezmatt.org. I don't guarantee to be able to help, but I'll give it a shot. Patches
are far more helpful.
AUTHOR
splitdns323fw was written by Matt Palmer, based on reverse-engineering work done by Leschinsky Oleg.
COPYRIGHT
Copyright (C) 2008 Matt Palmer.
This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICU-
LAR PURPOSE, to the extent permitted by law.
SEE ALSO
mkimage(1), mkdns323fw(1).
dns323-firmware-tools 0.3 November 2008 SPLITDNS323FW(1)