SPLITDNS323FW(1) User Commands SPLITDNS323FW(1)NAME
splitdns323fw - extract data from DNS-323 (and other) firmware images
SYNOPSIS
splitdns323fw [-k KERNEL] [-i INITRD] [-d DEFAULTS] firmwarefile
DESCRIPTION
splitdns323fw parses an existing firmware image for a device such as the D-Link DNS-323, DNS-321, and Conceptronics CH3SNAS.
By default, if only the firmwarefile (R)option is given, the script verifies the checksums of the included components and prints a bunch of
useful info about the image. If you specify one or more of the other options, however, the corresponding section of the firmware image
will be written to that file.
-k kernel, --kernel=kernel
Write the kernel part of the firmware image to the specified file.
-i initrd, --initrd=initrd
Write the initrd part of the firmware image to the specified file.
-d defaults.tar.gz, --defaults=defaults.tar.gz
Write the defaults part of the firmware image to the specified file.
BUGS
E-mail bug reports to theshed+dns323-firmware-tools@hezmatt.org. I don't guarantee to be able to help, but I'll give it a shot. Patches
are far more helpful.
AUTHOR
splitdns323fw was written by Matt Palmer, based on reverse-engineering work done by Leschinsky Oleg.
COPYRIGHT
Copyright (C) 2008 Matt Palmer.
This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICU-
LAR PURPOSE, to the extent permitted by law.
SEE ALSO mkimage(1), mkdns323fw(1).
dns323-firmware-tools 0.3 November 2008 SPLITDNS323FW(1)
Check Out this Related Man Page
ATMEL_FWL(8) System Manager's Manual ATMEL_FWL(8)NAME
atmel_fwl - Load firmware into Atmel at76c50x wireless networking chips.
SYNOPSIS
atmel_fwl <interface> /path/to/firmware
DESCRIPTION
atmel_fwl loads firmware images for Atmel at76c50x series wireless networking chips into the Linux driver for same.
Note that this utility is not normally necessary, since the driver will automatically load the correct firmware image via the hotplug sys-
tem. Atmel_fwl is provided for applications where use of the hotplug system may not be desirable.
atmel_fwl should be run after the interface has been created (after card insertion, in the case of PCMCIA cards) but before it is brought
up by running ifconfig.
NOTES
Note that there are two versions of many of the firmware images, the second one with the suffix "-wpa". These are later releases from Atmel
which support WPA privacy. They are only usable by versions of the driver greater than 0.9. Be sure not to use the "-wpa" one unless your
in-kernel driver code is version 0.9 or better. Sadly, as of version 0.9, the in-kernel driver does not actually support the setting of WPA
passphrases.
The firmware images are usually installed in /usr/lib/hotplug/firmware.
The status of the driver, including its firmware loading, is available in /proc/driver/atmel
FILES
/usr/lib/hotplug/firmware
/proc/driver/atmel
SEE ALSO iwconfig(8), ifconfig(8),
AUTHOR
This manual page was written by Simon Kelley <simon@thekelleys.org.uk>.
ATMEL_FWL(8)
Hi, am a new comer to the AIX side.
i had 3 specific questions.
1) what is firmware
2) how to locate the firmware running on a unix server
3) how to do firmware update(is it something i download from IBM site)
thanks everybody for taking the time and plz reply.
karthik (5 Replies)
I have solaris X4500 with ILOM version 1.1.1. I want to update the firmware. I know that we need to use
load -source tftp://tftpserver/image file
But I do not understand what is the IP address of the tftp server that we need to type in there.
Kindly, help me with this.
Thank you (5 Replies)
I get an error message when I try to upgrade the firmware. The error message is displayed below.
Image has no uboot. DO NOT RESET OR YOU WILL BRICK THE ILOM. Please retry with the correct image
I do not understand anything about this message. May I know what does it mean ? How can I get rid... (6 Replies)
Lets says I have 2 HMC's A and B, connected to a p570 managed system.
Right now the firmware level of the p570 is EM320_076 and that needs to be upgraded to EM340_095.
Now the HMC's are at V7R3.3 and as per the code matrix the HMC's needs to be upgraded to V7R3.4 Servicepack 2.
Now my... (5 Replies)
how can we download the firmware form the host to the XSCF , My host is not configured with either FTP,HTTPS or proxy server. Someone told me we can do it with getflashimage but i did not find any info getflashimage man page to do it.
Any help will be appreciated. (3 Replies)
When I try to download firmware for pseries (power5 cpu), I found it seems the firmware upgrade code are same for 9117-570 and 9110-510. If they are the same current firmware level and want to upgrade to same firmware.
Am I right?
Because it descript:
This package provides new firmware for... (3 Replies)
Hi
I am having a file with the following content(its created by ls of a directory):
-rw-r----- 1 321 321 0 Oct 14 10:41 xcv23456
-rw-r----- 1 321 321 0 Oct 14 10:41 xcv23457
-rw-r----- 1 321 321 0 Oct 14 10:41 xcv23458
-rw-r----- 1 321 321 ... (6 Replies)
Hi
I am trying to downgrade a ds4800 from firmware level 7.60.40.00 to 6.60.02.00
apologies think I might have already posted this in th wrong forum - 1st time - so please be gentle
your help would be greatly appreciated
regards
Patrick Boyle (2 Replies)
Hello AIX experts,
I have 7038-6M2 server, its operating system is AIX 5.2, and its firmware is 3K041021
After some searching on net, I tried to update its firmware level to 3K080425, so I downloaded the required rpm, and followed the steps.
After rebooting the server, it stopped and an error... (6 Replies)
Dear All,
Please help to find out the patch and firmware versions in HP-UX systems. as uname -r is showing os version and
uname -a
HP-UX xxxxxx B.11.23 U 9000/800 2781427196 unlimited-user license.
Kindly help to find out the existing Kernel and firmware versions.
Also I need to... (3 Replies)
Hi
Does someone have the latest firmware for a sunfire v880
I have a problem with the FC-AL disk i guess i need to upgrade the firmware but i dont have a support with oracle and i can't find it anywhere
thank you (4 Replies)