06-11-2019
@RecoveryOne: You are right, this looks like a HW problem. Still, as long as we know nothing about his environment (is this an LPAR? is in an unvirtualised system? Is there a VIOS? had it errors during boot? ...) we have no chance of contributing anything purposeful to this problem.
To add to his problems: he has a HACMP cluster running and this will not recover itself from a "script error" like the one it has already run into. You need to use HACMP-recovery-procedures to get out of this state and this needs a sound understanding of how HACMP (=SystemMirror, =PowerHA) works. It is difficult to troubleshoot something as complex as a cluster over the internet and in fact it is bordering on criminal to have someone who is obviously way out of his league to administrate a system deemed valuable and mission-critical enough to warrant a (rather costly) HA-solution. This is like buying a Formula-One racing car and setting a 5-year-old behind the steering wheel.
@trevian3969: sorry, if this sounds like a personal attack - it is not! But from the phrasing of your questions i can tell that you never had any in-depth experience with AIX at all and a system with HACMP installed is most likely too valuable (otherwise why bother with high-availability at all?) to be administrated by someone who has no working experience with the system at all. You are attempting things even some seasoned AIX administrators would be uncomfortable with. Any newbie would be in exact the same situation as you are now.
I hope this helps.
bakunin
10 More Discussions You Might Find Interesting
1. IP Networking
Im newest in unix,
Please, give me solution for installing lan adapter if driver not found in the list of ethernet drivers
ihave unix driver in a dos diskete
please give me the other solution
and tell me where the domain of unix class online, so ican read from it.
Thank's very much (3 Replies)
Discussion started by: ade_muhdiat
3 Replies
2. Solaris
Hi. I need to find a simple SCSI adapter card for a Sun Ultra 5 workstation. I don't need the type w/ ethernet attached (e.g. X1032) as I already have ethernet onboard & they are more spendy.
I know Adaptec is out, but what unit would work? I am attaching an external SCSI tape unit to this... (4 Replies)
Discussion started by: Plain Person
4 Replies
3. Solaris
Hi everyone, it's me the Solaris novice once again. Here's my situation.
- I bought a Sun Ultra 10 Creator 3D Workstation and Sony 19" SVGA Monitor package deal.
- The system has the Creator 3D Video Adapter installed but I could not use it because the adapter has a 13w3 connection and my... (5 Replies)
Discussion started by: jbarbuto
5 Replies
4. HP-UX
Hi ,
Hi what is an adapter?what is its use ?
How to log into a tibco server from unix home directory. (1 Reply)
Discussion started by: megh
1 Replies
5. UNIX for Dummies Questions & Answers
Hi all, I got sort of a task to do. I have to write in C "simulated network driver". What does it mean?
- It has to run on all network adapters
- It has to be as simple as it can be
- It has to run on all linux distributions (or at least most of them)
- It does not have to run a network... (4 Replies)
Discussion started by: Chrisdot
4 Replies
6. SCO
I inserted a PCI Realtek RTL8139 network adapter on a PC running SCO Openserver 5.0.6.
I successfully loaded drivers and I'm trying to install the card with netconfig command, unfortunately without success.
Here are the steps I follow to install the card:
I run netconfig, from menu 'hardware'... (2 Replies)
Discussion started by: kampus
2 Replies
7. Hardware
I need to connect 80pin SCA Ultra320 SCSI hdd to 68pin.
There are rumors that some bad "passive" adapters with problematic termination can fry the HDD. The adapter we got is Assmann ABSCA-2. Hard drive is 'Fujitsu MAW3073NC'
Do we need to set any jumpers before turning it on?
We already had... (0 Replies)
Discussion started by: orange47
0 Replies
8. AIX
Hello,
Runing VIO and couple lpars on POWER blade.
I want to dedicate graphics adapter(ati0) to one lpar. Is that possible ?
I tried to do that using IVM (I/O Adapter Management->View/Modify Physical Adapters->Modify partition assignment):
Failed to remove adapter U78A6.001.WIH4088-P2-C8... (1 Reply)
Discussion started by: vilius
1 Replies
9. AIX
Hi,
I want to change from vscsi to npiv. Is it possible to use both on the same adapter, so we can change the systems one by one, or must we place a second FC adapter in the VIO servers?
Thanks,
Ronald (2 Replies)
Discussion started by: ronaldm60
2 Replies
10. Red Hat
Hi,
I have installed Oracle Enterprise Linux 5 in my PC. After the installation the Ethernet Card is not got detected.
But I could able to get the details using the command lspci -a:
01:00.0 Ethernet controller: Attansic Technology Corp. L1 Gigabit Ethernet Adapter (rev b0).
But I could... (4 Replies)
Discussion started by: chidhu.anu
4 Replies
DE(4) Kernel Interfaces Manual DE(4)
NAME
de - DEC DEUNA 10 Mb/s Ethernet interface
SYNOPSIS
/sys/conf/SYSTEM:
NDE de_controllers # DEUNA
DESCRIPTION
The de interface provides access to a 10 Mb/s Ethernet network through a Digital Equipment UNIBUS Network Adapter (DEUNA).
Each of the host's network addresses is specified at boot time with an SIOCSIFADDR ioctl. The de interface employs the address resolution
protocol described in arp(4P) to dynamically map between Internet and Ethernet addresses on the local network.
The interface normally tries to use a ``trailer'' encapsulation to minimize copying data on input and output. The use of trailers is nego-
tiated with ARP. This negotiation may be disabled, on a per-interface basis, by setting the IFF_NOTRAILERS flag with an SIOCSIFFLAGS
ioctl.
DIAGNOSTICS
de%d: hardware address %s. This is a normal autoconfiguration message noting the 6 byte physical ethernet address of the adapter.
de%d: oerror, flags=%b tdrerr=%b (len=%d). The hardware indicated an error in transmitting a packet to the cable. The status and error
flags are reported.
de%d: ierror, flags=%b lenerr=%b (len=%d). The hardware indicated an error in reading a packet from the cable. The status and error flags
are reported.
de%d: can't handle af%d. The interface was handed a message with addresses formatted in an unsuitable address family; the packet was
dropped.
de%d: buffer unavailable. The interface received more packets than it had buffers allocated to receive them.
de%d: address change failed, csr0=%b csr1=%b. The interface was unable to reprogram its physical ethernet address. This may happen with
very early models of the interface. This facility is used only when the controller is not the first network interface configured for XNS.
The following messages indicate a probable hardware error performing the indicated operation during autoconfiguration or initialization.
The two control and status registers should indicate the nature of the failure. See the hardware manual for details.
de%d: reset failed, csr0=%b csr1=%b.
de%d: ppcb failed, csr0=%b csr1=%b.
de%d: read addr failed, csr0=%b csr1=%b.
de%d: wtring failed, csr0=%b csr1=%b.
de%d: wtmode failed, csr0=%b csr1=%b.
SEE ALSO
intro(4N), inet(4F), arp(4P)
3rd Berkeley Distribution August 20, 1987 DE(4)