Take a look on first lpar, we can see the virtual fiber, it comes from VIOS and routed to physical FC of Power machine.
Take a look on second lpar, it's not virtual. I wonder if it is actual physical FC from Power Machine assigned directly to lpar. --- Post updated at 09:27 AM ---
I wonder where those physical FC come from? As virtual FC comes from VIOS.
Moderator's Comments:
edit by bakunin: see my post below, please use CODE-tags. Thank you.
Hi,
Is there a way to dynamically increase the size of virtual disk on the LPAR. The virtual disk is coming from my VIO Server. From my SAN I have allocated a disk to VIO Server and from VIO Server to my LPAR....If I increase the space of the logical SAN DISK (DS 4700 using IBM TotalStorage... (0 Replies)
Hi,
I want to know if there is any command which will tell me if an AIX machine is a LPar or not. I am using "lparstat -i" but it does not work on all AIX machines. Is there any generic command by whose output I will come to know if it is an LPar or not?
Please help.
Thanks,
Vineet (3 Replies)
Hello, we have a wierd and urgent problem, with a few of our p595 LPARs running AIX 5.3. The LPARs ran AIX 5.3 TL 7 and booted off EMC SAN disks, using EMC Powerpath. Every boot we run "pprootdev on" and "pprootdev fix". We can issue "bosboot -a" and we can reboot the machines.
Now, on two... (2 Replies)
Hi All,
I recently got a connection to the SAN through a fibre channel on my solaris box:
#luxadm -e port
/devices/pci@1d,700000/SUNW,qlc@1/fp@0,0:devctl CONNECTED
#ls -l /dev/cfg
lrwxrwxrwx 1 root root 48 Feb 23 12:31 c4 -> ../../devices/pci@1d,700000/SUNW,qlc@1/fp@0,0:fc
I then... (2 Replies)
Hi Guru, my question is that can I create LPAR in AIX 5.3, 6.0, 6.1 by using smit lpar, rather than using HMC or AIX Commands? Thank you very much. Mir Alihttp://xwww.unix.com/images/icons/icon5.gif (3 Replies)
I have login into a server, and when i launch this command uname -L.
I can see there is a LPAR.
But is there anymore commands i can use to get more information on the LPAR ?
like it is VIO ?
wat the IP address ?
etc, etc.
please help. Thank you. (7 Replies)
We are running into a problem that we thought had solved but no go...
We have multiple machine types but 1 AIX and 2 i550 (AS/400) with 4 lpar each.
Existing AIX is an old (2004 vintage) machine with 5.2 on it for historical use only.
Existing Power6 i550 running code that will used... (6 Replies)
Hello,
I've set up email alerts on AIX Servers. so that i can get email notifications (via mail relay server) when ever there is abnormal behavior.
for example
1) my script monitors CPU/disk/memory etc... when it reaches high water ark, it will send an email alert.
2) disk usage alerts
3)... (5 Replies)
We have 2 LPAR. LPAR #1 have a Application, Database Server process (ctree Server) and SAN+Physical Table. LPAR#2 has only Application.
Both Application process are connected to Database via C-tree Server Process (Running on LPAR #1..
We want to keep one Active C-tree Server and one Backup... (1 Reply)
Discussion started by: gabhanes
1 Replies
LEARN ABOUT OPENSOLARIS
mpt
MPT(4) BSD Kernel Interfaces Manual MPT(4)NAME
mpt -- LSI Fusion-MPT SCSI/Fibre Channel driver
SYNOPSIS
To compile this driver into the kernel, place the following lines in your kernel configuration file:
device scbus
device mpt
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
mpt_load="YES"
DESCRIPTION
The mpt driver provides support for the LSI Logic Fusion-MPT family of SCSI, Fibre Channel and SAS controllers.
HARDWARE
The following controllers are supported by the mpt driver:
o LSI Logic 53c1030, LSI Logic LSI2x320-X (Single and Dual Ultra320 SCSI)
o LSI Logic AS1064, LSI Logic AS1068 (SAS/SATA)
o LSI Logic FC909 (1Gb/s Fibre Channel)
o LSI Logic FC909A (Dual 1Gb/s Fibre Channel)
o LSI Logic FC919, LSI Logic 7102XP-LC (Single 2Gb/s Fibre Channel)
o LSI Logic FC929, LSI Logic FC929X, LSI Logic 7202XP-LC (Dual 2Gb/s Fibre Channel)
o LSI Logic FC949X (Dual 4Gb/s Fibre Channel)
o LSI Logic FC949E, LSI Logic FC949ES (Dual 4Gb/s Fibre Channel PCI-Express)
The Ultra 320 SCSI controller chips supported by the mpt driver can be found onboard on many systems including:
o Dell PowerEdge 1750 thru 2850
o IBM eServer xSeries 335
These systems also contain Integrated Raid Mirroring and Integrated Raid Mirroring Enhanced which this driver also supports.
The SAS controller chips are also present on many new AMD/Opteron based systems, like the Sun 4100. Note that this controller can drive both
SAS and SATA drives or a mix of them at the same time. The Integrated Raid Mirroring available for these controllers is poorly supported at
best.
The Fibre Channel controller chipset are supported by a broad variety of speeds and systems. The Apple Fibre Channel HBA is in fact the
FC949ES card.
This driver also supports target mode for Fibre Channel cards. This support may be enabled by setting the desired role of the core via the
LSI Logic firmware utility that establishes what roles the card can take on - no separate compilation is required.
SEE ALSO cd(4), ch(4), da(4), pci(4), sa(4), scsi(4), targ(4), mptutil(8), gmultipath(8)
LSI Logic Website, http://www.lsilogic.com/.
HISTORY
The mpt driver first appeared in FreeBSD 4.6.
AUTHORS
The mpt driver was originally written for FreeBSD by Greg Ansley and marginally improved upon by Matt Jacob <mjacob@FreeBSD.org>.
Justin Gibbs <gibbs@FreeBSD.org> and Scott Long <scottl@FreeBSD.org> have made more substantial improvements.
BUGS BSD May 13, 2010 BSD