Hi
I am trying to create a fedora 11 usb boot disk for my acer aspire note book.
Problem is the only access i have to another machine is a mac running leopard.
Can some one tell me how i go about this please
Treds (3 Replies)
One of our T5220 servers fail to boot due to following error:
ERROR: The following devices are disabled:
XAUI1
XAUI0
I can't see any disabled components in SP console, any idea what is the problem? (1 Reply)
I am trying to dual boot on an external USB 500GB drive using my laptop.I have Windows 7 installed and booting on 1st partition 230GB now as active primary, 2nd partition is 100GB as primary, and 3rd partition is 135GB as primary. I was intending on installing Ubuntu onto the 2nd partition. I read... (12 Replies)
I have small problem: my hard drive has 500GB storage and it is divided into partitions
/dev/sda1 - 20 GB (boot)
/dev/sda2 - rest
I want to clone only one partition /dev/sda1 and write all data on my USB stick /dev/sdb
What's more I want to make my USB bootable and I don't know at all how can... (3 Replies)
I have three Sun Oracle Netra T5220s. I am trying to just get the processor information psrinfo or prtdiag -v from the # prompt in single user mode.
I am needing to know the commands to get to boot the CD/DVD of the Solaris OS. I am using it via Serial Port Management.
Tinkering around I... (4 Replies)
Hello all,
I am looking for a way to copy the existing Ubuntu server 12.04 to a USB (with all the packages and such) and make it boot from the USB.
I have seen other threads about copying the CD image to the USB, which is not exactly I am looking for.
Before I start diving into anything I... (4 Replies)
hi:)
i can't boot my sun server by iso solaris 10 sparc dvd that i did download from oracle site.
my hardware is sun T5220.
i receive these after running boot cdrom -s :
can't read disk lable
can't open disk lable package
ERROR: boot-read fail
whould u help me?
Please use CODE... (1 Reply)
Discussion started by: Arefdel
1 Replies
LEARN ABOUT NETBSD
stpcide
STPCIDE(4) BSD Kernel Interfaces Manual STPCIDE(4)NAME
stpcide -- STMicroelectronics STPC IDE disk controllers driver
SYNOPSIS
stpcide* at pci? dev ? function ? flags 0x0000
DESCRIPTION
The stpcide driver supports the STMicroelectronics STPC x86 SoC internal IDE controllers, and provides the interface with the hardware for
the ata(4) driver. The driver features DMA mode 2 and PIO mode 4 transfer speeds.
The 0x0002 flag forces the stpcide driver to disable DMA on chipsets for which DMA would normally be enabled. This can be used as a debug-
ging aid, or to work around problems where the IDE controller is wired up to the system incorrectly.
SEE ALSO ata(4), atapi(4), intro(4), pci(4), pciide(4), wd(4), wdc(4)BUGS
The timings used for the DMA and PIO modes are for STPC Atlas and its siblings with their PCI clock configured at 33 MHz. Other speeds
including the STPC Vega Ultra-IDE controller will need adjustments.
BSD October 31, 2003 BSD