As noted in the message marked in red above... maybe the boot command is expecting you to provide the pathname of a file on the CD-ROM and not just the -s argument to be passed to it???
What operating system and hardware are you using?
This User Gave Thanks to Don Cragun For This Post:
I'm running a Ultra 60 and having problems booting from the cdrom. This is the error I get,
Boot device: /pci@1f,4000/scsi@3/disk@6,0:f File and args:
The file just loaded does not appear to be executable.
Any know what could be the problem here? I've even tried connecting a 2nd cdrom... (3 Replies)
Hi Everyone,
I have a problem. I'm trying too reinstall sun solaris 8.0 on may Sunfire 280r but solaris 9.0 is all ready installed. I tried to boot from cd rom it keeps telling me that File does not seem executable. I need to get Solaris 8.0 on this system. I have boot all ready in single mode... (4 Replies)
I'm running solaris 2.5.1. My main development server is DEAD, i can't even boot off the cdrom, it powers up, acts like it is starting the boot process but then says cannot find boot device. I've done the search here on this site and saw the other posts, but at the ok prompt it won't even let me... (3 Replies)
I want to install Solaris 9 on SUN ULTRA 10. The cdrom is attached to an ide controller. The server is currently running Solaris 2.6
I insert Solaris cd 1 of 2 and at the ok prompt I type boot cdrom i get the error below
Boot device: /pci@1f,0/pci@1,1/ide@3/cdrom@2,0:f file and args:... (11 Replies)
i am having a problem when trying to boot from cdrom. I received the below message
system is not bootable, boot command is disabledfound
how can i fix this.
also what is the key combination on ordinary keyboard for STOP+A. Is it ctrl+break? (2 Replies)
Hi all am trying to boot the system from cdrom in single user mode , however when i am giving command boot cdrom -s i am getting below error
Boot Device: /pci@1f,0/pci@1,1/ide@3/cdrom@2,0: f file and args:
Can't read disk label
Can't open disk label package
can,t open boot device
... (17 Replies)
iam traying to install o/s in spark machine it showing error
ok >boot cdrom
is showing error
short disk read
failed to read superblock
the file just loaded does not appear to excutable
how to solve this can u help me (6 Replies)
I have a server with a scsi raid controller (for hard drives) and a scsi controller (for tape drive and cd-rom). I am trying to boot from the cd-rom but can't. During boot up, bootable media is detected in the cd-rom but the system will not boot from it. BIOS for the raid controller installs but... (1 Reply)
Discussion started by: powwm
1 Replies
LEARN ABOUT X11R4
installboot
installboot(1M)installboot(1M)NAME
installboot - install bootblocks in a disk partition
SYNOPSIS
installboot bootblk raw-disk-device
The boot(1M) program, ufsboot, is loaded from disk by the bootblock program which resides in the boot area of a disk partition.
The ufs boot objects are platform-dependent, and reside in the /usr/platform/platform-name/lib/fs/ufs directory. The platform name can be
found using the -i option of uname(1).
The installboot utility is a SPARC only program. It is not supported on the architecture. users should use installgrub(1M) instead.
bootblk The name of the bootblock code.
raw-disk-device The name of the disk device onto which the bootblock code is to be installed; it must be a character device which is read-
able and writable. Naming conventions for a SCSI or IPI drive are c?t?d?s? and c?d?s? for an IDE drive.
Example 1: Installing UFS Boot Block
To install a ufs boot block on slice 0 of target 0 on controller 1 of the platform where the command is being run, use:
example# installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk
/dev/rdsk/c1t0d0s0
/usr/platform/platform-name/lib/fs/ufs
directory where ufs boot objects reside.
/platform/platform-name/ufsboot
second level program to boot from a disk or CD
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
od(1), uname(1), boot(1M), init(1M), kadb(1M), kernel(1M), monitor(1M), reboot(1M), rpc.bootparamd(1M), init.d(4), attributes(5)WARNINGS
The installboot utility fails if the bootblk or openfirmware files do not exist or if the raw disk device is not a character device.
11 Apr 2005 installboot(1M)