Sponsored Content
Top Forums UNIX for Beginners Questions & Answers SCO OpenServer 5 Will Not Boot Post 303027186 by jgt on Monday 10th of December 2018 01:52:36 PM
Old 12-10-2018
Even without the pictures, there should only be two or three lines in mscsi.

Code:
*ha  attach  number  ID  lun  bus    *      

wd   Sdsk    0          0     0    0   

wd   Srom    0         1      0    0

where ID is the controller 0 for primary, and one for secondary
and lun is 0 for master, and one for slave. bus is always 0.
It is important that the contents of this file match the cmos. Modify the disk line in this file to match the actual cmos, or modify the cmos to match the file,, then save a copy of unix in /stand and relink the kernel (if you made a change to the file.)
Code:
cd /stand
cp unix unix.works

Try booting from the new unix, and if that fails, you still have the saved current copy.
Note that /stand is normally mounted read only, so you will have to unmount it and re-mount in order to copy or write to it.
 

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Help For SCO OpenServer

I've just installed Unix SCO OpenServer System v in an Intel PC and Everithing ok, except just one thing, in the begining of the installation the wizard asked me about the mouse , i have a generic 3 buttons mouse and i took a logitech and did not work i need to change the mouse configuration, ... (2 Replies)
Discussion started by: jimmyvaldes
2 Replies

2. UNIX for Dummies Questions & Answers

sco openserver 5.5

hello! when i try to make my system dual boot with both win98 & sco open server 5.5 it doesn't work at all.neither win98 take start nor sco open server boots.what should i do ? kindly help me thanks (1 Reply)
Discussion started by: buntty
1 Replies

3. UNIX for Advanced & Expert Users

SCO 5.0.2 openserver

I am doing some work for a customer that is running SCO 5.0.2 openserver and they have lost their cd. Is there anyplace I can download it? I have a replacement being shipped but it will not be here for two days and they are down. Any ideals? (3 Replies)
Discussion started by: SCOoT
3 Replies

4. UNIX for Dummies Questions & Answers

boot failure SCO 5.0.6 OpenServer

hello guys. I just installed SCO 5.0.6 OpenServer it went all the way to the end of the installation and the first boot try it gave me this message. not a directory boot not found cannot open stage 1 boot failure: error loading hd (40)/boot (2 Replies)
Discussion started by: josramon
2 Replies

5. SCO

Ethereal for SCO OpenServer 5.0.7???

Which version of Ethereal can I use for SCO OpenServer 5.0.7??? (0 Replies)
Discussion started by: bean2
0 Replies

6. UNIX for Dummies Questions & Answers

SCO Openserver 6.0

Hi there guys. I just got this new SCO version and i'm having some problem printing from shell, This is what i'm typing at the # sign : lp -dHP /etc/hosts and it prints no problem but when i use any other user at the $ sign it gives me this error. /dev/fd/7: /usr/lib/lp/sysv/7: not found. ... (1 Reply)
Discussion started by: josramon
1 Replies

7. UNIX for Dummies Questions & Answers

SCO Openserver 6.0

Hi guys, I just got this new 6.0 version and i'm trying to setup a remote office to telnet to this server running sco 6.0, in previous version all i have to do is add this file under /etc/rc2.d call S99route and put the gate in that file and that was it, for some reason in 6.0 it does not... (1 Reply)
Discussion started by: josramon
1 Replies

8. SCO

sco openserver 5.0.7

Dear members when i installed dual processor patch in openserver 5.0.7 in hp ML370 G4 server it hangs in sco at G_hd_config. i tried MP4, EFS 5.64,5.70A but not solved the problem.. (0 Replies)
Discussion started by: M_farooqui
0 Replies

9. SCO

sco openserver 5.0.0 boot / root disk

Hi, I have an openserver 5.0.0 machine in the office. The sysad of that machine left years ago without leaving the password to anyone. I was wondering if someone has a copy of the boot / root diskettes (rescue) for this version? Or perhaps if anyone knows a download link / location in the... (0 Replies)
Discussion started by: marcpascual
0 Replies

10. SCO

I need SCO Openserver 4.2!!!!

I need SCO Openserver 4.2. Please, give me distributive of that version SCO:eek: (0 Replies)
Discussion started by: caine
0 Replies
kstat(1M)						  System Administration Commands						 kstat(1M)

NAME
kstat - display kernel statistics SYNOPSIS
kstat [-lpq] [-T u | d ] [-c class] [-m module] [-i instance] [-n name] [-s statistic] [interval [count]] kstat [-lpq] [-T u | d ] [-c class] [module:instance:name:statistic...] [interval [count]] DESCRIPTION
The kstat utility examines the available kernel statistics, or kstats, on the system and reports those statistics which match the criteria specified on the command line. Each matching statistic is printed with its module, instance, and name fields, as well as its actual value. Kernel statistics may be published by various kernel subsystems, such as drivers or loadable modules; each kstat has a module field that denotes its publisher. Since each module may have countable entities (such as multiple disks associated with the sd(7D) driver) for which it wishes to report statistics, the kstat also has an instance field to index the statistics for each entity; kstat instances are numbered starting from zero. Finally, the kstat is given a name unique within its module. Each kstat may be a special kstat type, an array of name-value pairs, or raw data. In the name-value case, each reported value is given a label, which we refer to as the statistic. Known raw and special kstats are given statistic labels for each of their values by kstat; thus, all published values can be referenced as module:instance:name:statistic. When invoked without any module operands or options, kstat will match all defined statistics on the system. Example invocations are pro- vided below. All times are displayed as fractional seconds since system boot. OPTIONS
The tests specified by the following options are logically ANDed, and all matching kstats will be selected. A regular expression containing shell metacharacters must be protected from the shell by enclosing it with the appropriate quotes. The argument for the -c, -i, -m, -n, and -s options may be specified as a shell glob pattern, or a Perl regular expression enclosed in '/' characters. -c class Displays only kstats that match the specified class. class is a kernel-defined string which classifies the "type" of the kstat. -i instance Displays only kstats that match the specified instance. -l Lists matching kstat names without displaying values. -m module Displays only kstats that match the specified module. -n name Displays only kstats that match the specified name. -p Displays output in parseable format. All example output in this document is given in this format. If this option is not specified, kstat produces output in a human-readable, table format. -q Displays no output, but return appropriate exit status for matches against given criteria. -s statistic Displays only kstats that match the specified statistic. -T d | u Displays a time stamp before each statistics block, either in ctime(3C) format ('d') or as an alphanumeric representation of the value returned by time(2) ('u'). OPERANDS
The following operands are supported: module:instance:name:statistic Alternate method of specifying module, instance, name, and statistic as described above. Each of the mod- ule, instance, name, or statistic specifiers may be a shell glob pattern or a Perl regular expression enclosed by '/' characters. It is possible to use both specifier types within a single operand. Leaving a specifier empty is equivalent to using the '*' glob pattern for that specifier. interval The number of seconds between reports. count The number of reports to be printed. EXAMPLES
In the following examples, all the command lines in a block produce the same output, as shown immediately below. The exact statistics and values will of course vary from machine to machine. Example 1: Using the kstat Command example$ kstat -p -m unix -i 0 -n system_misc -s 'avenrun*' example$ kstat -p -s 'avenrun*' example$ kstat -p 'unix:0:system_misc:avenrun*' example$ kstat -p ':::avenrun*' example$ kstat -p ':::/^avenrun_d+min$/' unix:0:system_misc:avenrun_15min 3 unix:0:system_misc:avenrun_1min 4 unix:0:system_misc:avenrun_5min 2 Example 2: Using the kstat Command example$ kstat -p -m cpu_stat -s 'intr*' example$ kstat -p cpu_stat:::/^intr/ cpu_stat:0:cpu_stat0:intr 29682330 cpu_stat:0:cpu_stat0:intrblk 87 cpu_stat:0:cpu_stat0:intrthread 15054222 cpu_stat:1:cpu_stat1:intr 426073 cpu_stat:1:cpu_stat1:intrblk 51 cpu_stat:1:cpu_stat1:intrthread 289668 cpu_stat:2:cpu_stat2:intr 134160 cpu_stat:2:cpu_stat2:intrblk 0 cpu_stat:2:cpu_stat2:intrthread 131 cpu_stat:3:cpu_stat3:intr 196566 cpu_stat:3:cpu_stat3:intrblk 30 cpu_stat:3:cpu_stat3:intrthread 59626 Example 3: Using the kstat Command example$ kstat -p :::state ':::avenrun*' example$ kstat -p :::state :::/^avenrun/ cpu_info:0:cpu_info0:state on-line cpu_info:1:cpu_info1:state on-line cpu_info:2:cpu_info2:state on-line cpu_info:3:cpu_info3:state on-line unix:0:system_misc:avenrun_15min 4 unix:0:system_misc:avenrun_1min 10 unix:0:system_misc:avenrun_5min 3 Example 4: Using the kstat Command example$ kstat -p 'unix:0:system_misc:avenrun*' 1 3 unix:0:system_misc:avenrun_15min 15 unix:0:system_misc:avenrun_1min 11 unix:0:system_misc:avenrun_5min 21 unix:0:system_misc:avenrun_15min 15 unix:0:system_misc:avenrun_1min 11 unix:0:system_misc:avenrun_5min 21 unix:0:system_misc:avenrun_15min 15 unix:0:system_misc:avenrun_1min 11 unix:0:system_misc:avenrun_5min 21 Example 5: Using the kstat Command example$ kstat -p -T d 'unix:0:system_misc:avenrun*' 5 2 Thu Jul 22 19:39:50 1999 unix:0:system_misc:avenrun_15min 12 unix:0:system_misc:avenrun_1min 0 unix:0:system_misc:avenrun_5min 11 Thu Jul 22 19:39:55 1999 unix:0:system_misc:avenrun_15min 12 unix:0:system_misc:avenrun_1min 0 unix:0:system_misc:avenrun_5min 11 Example 6: Using the kstat Command example$ kstat -p -T u 'unix:0:system_misc:avenrun*' 932668656 unix:0:system_misc:avenrun_15min 14 unix:0:system_misc:avenrun_1min 5 unix:0:system_misc:avenrun_5min 18 EXIT STATUS
The following exit values are returned: 0 One or more statistics were matched. 1 No statistics were matched. 2 Invalid command line options were specified. 3 A fatal error occurred. FILES
/dev/kstat kernel statistics driver ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ |ATTRIBUTE TYPE |ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWcsu | +-----------------------------+-----------------------------+ SEE ALSO
sh(1), time(2), ctime(3C)gmatch(3GEN), kstat(3KSTAT), attributes(5), kstat(7D), sd(7D), kstat(9S) NOTES
If the pattern argument contains glob or Perl RE metacharacters which are also shell metacharacters, it will be necessary to enclose the pattern with appropriate shell quotes. SunOS 5.10 14 Oct 2004 kstat(1M)
All times are GMT -4. The time now is 03:03 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy