Unable to connect ASMI Post: 303023789

Sponsored Content

Operating Systems AIX Unable to connect ASMI Post 303023789 by filosophizer on Saturday 22nd of September 2018 03:06:25 PM

09-22-2018

Registered User

Unable to connect ASMI

After following the instructions given by resident moderator Bakunin over here
Installed Memory 32GB but shows only 16GB

#1 Connect to ASMI
#2 Configure the deconfigured memory
#3 Start the machine

OK, everything is fine, however now cannot connect to ASMI through browser,
using both HMC Ports
Default IP 1 = 192.168.2.147
Default IP 2 = 192.168.3.147

able to ping both IPs, did a reset of service processor from the control panel 9113-550 , pulled the power plug and started, still same problem
1- able to ping both service IPs
2- but unable to use any browser to connect it

I couldn't find this on the board
Figure 6. Top view of the system (including service processor reset switch)
https://www.ibm.com/support/knowledg...5/iphah704.gif
IBM Knowledge Center Error

Code:

$ lssysconn -r all
resource_type=0,type_model_serial_num=9113-550*107780E,sp=unavailable,side=unavailable,ipaddr=192.168.2.147,alt_ipaddr=192.168.3.147,state=No Connection,eth_loc_code=U787B.001.DNW3313-P1-T5,alt_eth_loc_code=U787B.001.DNW3313-P1-T6
$

# lscfg | grep ibmvmc0
* ibmvmc0          U9113.550.107780E-V1-C2                                      Virtual Management Channel
#

# lsrsrc -a IBM.MCP
2610-431 Cannot enumerate resources for this command on node 10.1.1.124. The node is not currently in the cluster.
2610-431 Cannot enumerate resources for this command on node 10.1.1.129. The node is not currently in the cluster.
2610-429 The specified resource class is not installed on node 10.1.1.120.
Resource Persistent Attributes for IBM.MCP
resource 1:
        MNName           = "10.1.1.125"
        NodeID           = 1439001851767854463
        KeyToken         = "10.1.1.110"
        IPAddresses      = {"10.1.1.110"}
        ActivePeerDomain = ""
        NodeNameList     = {"10.1.1.125"}
# lsrsrc -a IBM.DRM
Resource Persistent Attributes for IBM.DRM

Can I reset ASMI from control panel codes or any other procedure ?

Last edited by filosophizer; 09-22-2018 at 04:16 PM..

filosophizer

View Public Profile for filosophizer

Find all posts by filosophizer

10 More Discussions You Might Find Interesting

1. HP-UX

Unable to connect to HP-UX 11.11 via eXceed 7.1

Hello HP-UX Gurus, I am having issues trying to start an x-session via eXceed 7.1. When I bring up eXceed via XDMCP Braodcast I see the host name and IP Address but when I try to connect the X window does not come up. I made the modification to the following file �/etc/dt/config/Xaccess�...

2. Solaris

Unable to connect to Internet

Hi friends recently i have installed SXDE 1/08 into my machine,and i installed wifi driver also its working fine,Recently i was unable to connect to Internet,I have not changed any configurations and any installations,thing is that i got my iwk0 interface is UP and IP address also and i can...

3. Emergency UNIX and Linux Support

Unable to connect using SFTP

I shall explain the situation that I am facing to the best extent possible. I require some help, as this situation is an urgent one. I am trying to automate sending data from one AIX machine to another. A script runs that tries to push data received from an upstream application to another AIX...

4. AIX

Asmi errors

Hi friends How to clear the asmi deconfiguration errors.recently on cpu got deconfigured ibm assist to clear the error and to update the firmware please help me raj

5. AIX

Unable to connect VIO client

Hi I am facing very strange issue on my vio server 5 vio clients are confgured, now I am to connect 3 vio client , i am unable to connect 2 vio client my ip address,subnet mask,gateway is correct. i have rebooted and reconfigured the ip address, but issue is persists. Kindly suggest how to...

6. HP-UX

Unable to connect SSH from HP-UX

Hi, I'm trying to connect from an HP-UX with SSH2 client(ssh2 3.1.2 on hppa1.1-hp-hpux11.00) to an SSH2 server on a VxWorks system. The SSH connection is failing with the below connection logs: > /usr/local/bin/ssh2 -v -l testuser 10.10.10.10 debug: Ssh2/ssh2.c:1391: Using file...

7. Shell Programming and Scripting

Unable to connect to SQL through unix

I am trying to connect to SQL plus through unix but i am getting below error 'ksh: sqlplus: not found' note i am running this from /home/xxx do i need to set any environmental variable for this. below is my code echo " hello world" sqlplus -s apps/CAF78GEN<<EOF set heading...

8. Red Hat

Unable to connect Wireless

I have managed to install Broadcom BCM43228 Wireless adapter on a laptop running CentOS 5.9 using instructions at: wiki.centos.org/HowTos/Laptops/Wireless/Broadcom I had the problem "Error for wireless request "Set Encode" (8B2A): SET failed on device... mentioned on the same page and solved...

9. Red Hat

Unable to connect to internet

Hello, I just installed CentOS 7 (Server with GUI) and guess what I could install Virtual Box Guest additions without installing any extra package/software which is great news ! Now bad news or not so great news. My Host OS is Windows 10, Virtual Box is the virtualization software. CentOS7-1...

10. Solaris

Unable to connect using ftp

hi I am having issues when trying to connect using ftp, I am having the following error: User (10.100.48.73:(none)): moz 331 Password required for moza. Password: 530 Login incorrect. Login failed. ftp> by 221 Goodbye. I have created a user like this: useradd -g 10 -d /lam/moza -m -s...

LEARN ABOUT SUSE

tgt-setup-lun

tgt-setup-lun(8)					      System Manager's Manual						  tgt-setup-lun(8)

NAME

       tgt-setup-lun - creates a target, adds a device to the target and defines initiators that can connect to the target

SYNOPSIS

       tgt-setup-lun -d device -n target_name [initiator_IP1 initiator_IP2 ...] [-h]

DESCRIPTION

       Starts tgtd if necessary and creates a target according to the supplied target_name. The format of the target name is as follows:
       iqn.2001-04.com.<hostname>-<target_name> The target name must be unique.

       The  script then adds the requested device to the target. If specific IP addresses are defined, it adds them to the list of allowed initia-
       tors for that target. If no IP addresses is defined, it defines that the target accepts any initiator.

EXAMPLES

       Create a target that uses /dev/sdb1 and allows connections only from 192.168.10.81:
       tgt-setup-lun -d /dev/sdb1 -n my_target 192.168.10.81

       Create a target that uses /dev/sdb1 and allows connections only from 192.168.10.81 and 192.168.10.82:
       tgt-setup-lun -d /dev/sdb1 -n my_target 192.168.10.81 192.168.10.82

       Create a target that uses /dev/sdb1 and allows connections from any initiator:
       tgt-setup-lun -d /dev/sdb1 -n my_target

       Display help:
       tgt-setup-lun -h

AUTHOR

       Written by Erez Zilber

REPORTING BUGS

       Report bugs to <erezz@voltaire.com>.

COPYRIGHT

       Copyright (C) Voltaire Ltd. 2008.

																  tgt-setup-lun(8)

10 More Discussions You Might Find Interesting

1. HP-UX

Unable to connect to HP-UX 11.11 via eXceed 7.1

Discussion started by: smokie

2. Solaris

Unable to connect to Internet

Discussion started by: srinivas2828

3. Emergency UNIX and Linux Support

Unable to connect using SFTP

Discussion started by: ggayathri

4. AIX

Asmi errors

Discussion started by: senmak