tgt-setup-lun(8) [suse man page]
tgt-setup-lun(8) System Manager's Manual tgt-setup-lun(8) NAME
tgt-setup-lun - creates a target, adds a device to the target and defines initiators that can connect to the target SYNOPSIS
tgt-setup-lun -d device -n target_name [initiator_IP1 initiator_IP2 ...] [-h] DESCRIPTION
Starts tgtd if necessary and creates a target according to the supplied target_name. The format of the target name is as follows: iqn.2001-04.com.<hostname>-<target_name> The target name must be unique. The script then adds the requested device to the target. If specific IP addresses are defined, it adds them to the list of allowed initia- tors for that target. If no IP addresses is defined, it defines that the target accepts any initiator. EXAMPLES
Create a target that uses /dev/sdb1 and allows connections only from 192.168.10.81: tgt-setup-lun -d /dev/sdb1 -n my_target 192.168.10.81 Create a target that uses /dev/sdb1 and allows connections only from 192.168.10.81 and 192.168.10.82: tgt-setup-lun -d /dev/sdb1 -n my_target 192.168.10.81 192.168.10.82 Create a target that uses /dev/sdb1 and allows connections from any initiator: tgt-setup-lun -d /dev/sdb1 -n my_target Display help: tgt-setup-lun -h AUTHOR
Written by Erez Zilber REPORTING BUGS
Report bugs to <erezz@voltaire.com>. COPYRIGHT
Copyright (C) Voltaire Ltd. 2008. tgt-setup-lun(8)
Check Out this Related Man Page
CTL.CONF(5) BSD File Formats Manual CTL.CONF(5) NAME
ctl.conf -- CAM Target Layer / iSCSI target daemon configuration file DESCRIPTION
The ctl.conf configuration file is used by the ctld(8) daemon. Lines starting with '#' are interpreted as comments. The general syntax of the ctl.conf file is: pidfile path auth-group name { chap user secret ... } portal-group name { listen address discovery-auth-group name ... } lun name { path path } target name { auth-group name portal-group name [agname] port name lun number name lun number { path path } ... } Global Context auth-group name Create an auth-group configuration context, defining a new auth-group, which can then be assigned to any number of targets. debug level The debug verbosity level. The default is 0. maxproc number The limit for concurrently running child processes handling incoming connections. The default is 30. A setting of 0 disables the limit. pidfile path The path to the pidfile. The default is /var/run/ctld.pid. portal-group name Create a portal-group configuration context, defining a new portal-group, which can then be assigned to any number of targets. lun name Create a lun configuration context, defining a LUN to be exported by some target(s). target name Create a target configuration context, which can contain one or more lun contexts. timeout seconds The timeout for login sessions, after which the connection will be forcibly terminated. The default is 60. A setting of 0 disables the timeout. isns-server address An IPv4 or IPv6 address and optionally port of iSNS server to register on. isns-period seconds iSNS registration period. Registered Network Entity not updated during this period will be unregistered. The default is 900. isns-timeout seconds Timeout for iSNS requests. The default is 5. auth-group Context auth-type type Sets the authentication type. Type can be either "none", "deny", "chap", or "chap-mutual". In most cases it is not necessary to set the type using this clause; it is usually used to disable authentication for a given auth-group. chap user secret A set of CHAP authentication credentials. Note that for any auth-group, the configuration may only contain either chap or chap-mutual entries; it is an error to mix them. chap-mutual user secret mutualuser mutualsecret A set of mutual CHAP authentication credentials. Note that for any auth-group, the configuration may only contain either chap or chap-mutual entries; it is an error to mix them. initiator-name initiator-name An iSCSI initiator name. Only initiators with a name matching one of the defined names will be allowed to connect. If not defined, there will be no restrictions based on initiator name. initiator-portal address[/prefixlen] An iSCSI initiator portal: an IPv4 or IPv6 address, optionally followed by a literal slash and a prefix length. Only initiators with an address matching one of the defined addresses will be allowed to connect. If not defined, there will be no restrictions based on initiator address. portal-group Context discovery-auth-group name Assign a previously defined authentication group to the portal group, to be used for target discovery. By default, portal groups are assigned predefined auth-group "default", which denies discovery. Another predefined auth-group, "no-authentication", may be used to permit discovery without authentication. discovery-filter filter Determines which targets are returned during discovery. Filter can be either "none", "portal", "portal-name", or "portal-name-auth". When set to "none", discovery will return all targets assigned to that portal group. When set to "portal", discovery will not return targets that cannot be accessed by the initiator because of their initiator-portal. When set to "portal-name", the check will include both initiator-portal and initiator-name. When set to "portal-name-auth", the check will include initiator-portal, initiator-name, and authentication credentials. The target is returned if it does not require CHAP authentication, or if the CHAP user and secret used during discovery match those used by the target. Note that when using "portal-name-auth", targets that require CHAP authentication will only be returned if discovery-auth-group requires CHAP. The default is "none". listen address An IPv4 or IPv6 address and port to listen on for incoming connections. redirect address IPv4 or IPv6 address to redirect initiators to. When configured, all initiators attempting to connect to portal belonging to this portal-group will get redirected using "Target moved temporarily" login response. Redirection happens before authentication and any initiator-name or initiator-portal checks are skipped. target Context alias text Assign a human-readable description to the target. There is no default. auth-group name Assign a previously defined authentication group to the target. By default, targets that do not specify their own auth settings, using clauses such as chap or initiator-name, are assigned predefined auth-group "default", which denies all access. Another prede- fined auth-group, "no-authentication", may be used to permit access without authentication. Note that targets must only use one of auth-group, chap, or chap-mutual; it is a configuration error to mix multiple types in one target. auth-type type Sets the authentication type. Type can be either "none", "deny", "chap", or "chap-mutual". In most cases it is not necessary to set the type using this clause; it is usually used to disable authentication for a given target. This clause is mutually exclusive with auth-group; one cannot use both in a single target. chap user secret A set of CHAP authentication credentials. Note that targets must only use one of auth-group, chap, or chap-mutual; it is a configu- ration error to mix multiple types in one target. chap-mutual user secret mutualuser mutualsecret A set of mutual CHAP authentication credentials. Note that targets must only use one of auth-group, chap, or chap-mutual; it is a configuration error to mix multiple types in one target. initiator-name initiator-name An iSCSI initiator name. Only initiators with a name matching one of the defined names will be allowed to connect. If not defined, there will be no restrictions based on initiator name. This clause is mutually exclusive with auth-group; one cannot use both in a single target. initiator-portal address[/prefixlen] An iSCSI initiator portal: an IPv4 or IPv6 address, optionally followed by a literal slash and a prefix length. Only initiators with an address matching one of the defined addresses will be allowed to connect. If not defined, there will be no restrictions based on initiator address. This clause is mutually exclusive with auth-group; one cannot use both in a single target. offload driver Define iSCSI hardware offload driver to use for this target. portal-group name [agname] Assign a previously defined portal group to the target. The default portal group is "default", which makes the target available on TCP port 3260 on all configured IPv4 and IPv6 addresses. Optional second argument specifies auth group name for connections to this specific portal group. If second argument is not specified, target auth group is used. port name Assign specified CTL port (such as "isp0") to the target. On startup ctld configures LUN mapping and enables all assigned ports. Each port can be assigned to only one target. redirect address IPv4 or IPv6 address to redirect initiators to. When configured, all initiators attempting to connect to this target will get redi- rected using "Target moved temporarily" login response. Redirection happens after successful authentication. lun number name Export previously defined lun by the parent target. lun number Create a lun configuration context, defining a LUN exported by the parent target. lun Context backend block | ramdisk The CTL backend to use for a given LUN. Valid choices are "block" and "ramdisk"; block is used for LUNs backed by files or disk device nodes; ramdisk is a bitsink device, used mostly for testing. The default backend is block. blocksize size The blocksize visible to the initiator. The default blocksize is 512. device-id string The SCSI Device Identification string presented to the initiator. option name value The CTL-specific options passed to the kernel. All CTL-specific options are documented in the OPTIONS section of ctladm(8). path path The path to the file or device node used to back the LUN. serial string The SCSI serial number presented to the initiator. size size The LUN size, in bytes. FILES
/etc/ctl.conf The default location of the ctld(8) configuration file. EXAMPLES
auth-group ag0 { chap-mutual "user" "secret" "mutualuser" "mutualsecret" chap-mutual "user2" "secret2" "mutualuser" "mutualsecret" initiator-portal 192.168.1.1/16 } auth-group ag1 { auth-type none initiator-name "iqn.2012-06.com.example:initiatorhost1" initiator-name "iqn.2012-06.com.example:initiatorhost2" initiator-portal 192.168.1.1/24 initiator-portal [2001:db8::de:ef] } portal-group pg0 { discovery-auth-group no-authentication listen 0.0.0.0:3260 listen [::]:3260 listen [fe80::be:ef]:3261 } target iqn.2012-06.com.example:target0 { alias "Example target" auth-group no-authentication lun 0 { path /dev/zvol/tank/example_0 blocksize 4096 size 4G } } lun example_1 { path /dev/zvol/tank/example_1 } target iqn.2012-06.com.example:target1 { chap chapuser chapsecret lun 0 example_1 } target iqn.2012-06.com.example:target2 { auth-group ag0 portal-group pg0 lun 0 example_1 lun 1 { path /dev/zvol/tank/example_2 option foo bar } } SEE ALSO
ctl(4), ctladm(8), ctld(8) AUTHORS
The ctl.conf configuration file functionality for ctld(8) was developed by Edward Tomasz Napierala <trasz@FreeBSD.org> under sponsorship from the FreeBSD Foundation. BSD
February 11, 2015 BSD