#1 Connect to ASMI
#2 Configure the deconfigured memory
#3 Start the machine
OK, everything is fine, however now cannot connect to ASMI through browser,
using both HMC Ports
Default IP 1 = 192.168.2.147
Default IP 2 = 192.168.3.147
able to ping both IPs, did a reset of service processor from the control panel 9113-550 , pulled the power plug and started, still same problem
1- able to ping both service IPs
2- but unable to use any browser to connect it
Hello HP-UX Gurus,
I am having issues trying to start an x-session via eXceed 7.1.
When I bring up eXceed via XDMCP Braodcast I see the host name and IP Address but when I try to connect the X window does not come up.
I made the modification to the following file “/etc/dt/config/Xaccess”... (2 Replies)
Hi friends
recently i have installed SXDE 1/08 into my machine,and i installed wifi driver also
its working fine,Recently i was unable to connect to Internet,I have not changed any configurations and any installations,thing is that i got my iwk0 interface is UP and IP address also and i can... (6 Replies)
I shall explain the situation that I am facing to the best extent possible. I require some help, as this situation is an urgent one.
I am trying to automate sending data from one AIX machine to another. A script runs that tries to push data received from an upstream application to another AIX... (7 Replies)
Hi friends
How to clear the asmi deconfiguration errors.recently on cpu got deconfigured ibm assist to clear the error and to update the firmware please help me
raj (0 Replies)
Hi
I am facing very strange issue on my vio server 5 vio clients are confgured, now I am to connect 3 vio client , i am unable to connect 2 vio client my ip address,subnet mask,gateway is correct.
i have rebooted and reconfigured the ip address, but issue is persists.
Kindly suggest how to... (0 Replies)
Hi,
I'm trying to connect from an HP-UX with SSH2 client(ssh2 3.1.2 on hppa1.1-hp-hpux11.00) to an SSH2 server on a VxWorks system. The SSH connection is failing with the below connection logs:
> /usr/local/bin/ssh2 -v -l testuser 10.10.10.10
debug: Ssh2/ssh2.c:1391: Using file... (4 Replies)
I am trying to connect to SQL plus through unix but i am getting below error
'ksh: sqlplus: not found'
note i am running this from /home/xxx
do i need to set any environmental variable for this. below is my code
echo " hello world"
sqlplus -s apps/CAF78GEN<<EOF
set heading... (4 Replies)
I have managed to install Broadcom BCM43228 Wireless adapter on a laptop running CentOS 5.9 using instructions at:
wiki.centos.org/HowTos/Laptops/Wireless/Broadcom
I had the problem "Error for wireless request "Set Encode" (8B2A): SET failed on device... mentioned on the same page and solved... (0 Replies)
Hello,
I just installed CentOS 7 (Server with GUI) and guess what I could install Virtual Box Guest additions without installing any extra package/software which is great news !
Now bad news or not so great news.
My Host OS is Windows 10, Virtual Box is the virtualization software. CentOS7-1... (0 Replies)
hi
I am having issues when trying to connect using ftp, I am having the following error:
User (10.100.48.73:(none)): moz
331 Password required for moza.
Password:
530 Login incorrect.
Login failed.
ftp> by
221 Goodbye.
I have created a user like this:
useradd -g 10 -d /lam/moza -m -s... (11 Replies)
Discussion started by: fretagi
11 Replies
LEARN ABOUT DEBIAN
shorewall-exclusion
SHOREWALL-EXCLUSION(5) [FIXME: manual] SHOREWALL-EXCLUSION(5)NAME
exclusion - Exclude a set of hosts from a definition in a shorewall configuration file.
SYNOPSIS
!address-or-range[,address-or-range]...
!zone-name[,zone-name]...
DESCRIPTION
The first form of exclusion is used when you wish to exclude one or more addresses from a definition. An exclaimation point is followed by
a comma-separated list of addresses. The addresses may be single host addresses (e.g., 192.168.1.4) or they may be network addresses in
CIDR format (e.g., 192.168.1.0/24). If your kernel and iptables include iprange support, you may also specify ranges of ip addresses of the
form lowaddress-highaddress
No embedded whitespace is allowed.
Exclusion can appear after a list of addresses and/or address ranges. In that case, the final list of address is formed by taking the first
list and then removing the addresses defined in the exclusion.
Beginning in Shorewall 4.4.13, the second form of exclusion is allowed after all and any in the SOURCE and DEST columns of
/etc/shorewall/rules. It allows you to omit arbitrary zones from the list generated by those key words.
Warning
If you omit a sub-zone and there is an explicit or explicit CONTINUE policy, a connection to/from that zone can still be matched by the
rule generated for a parent zone.
For example:
/etc/shorewall/zones:
#ZONE TYPE
z1 ip
z2:z1 ip
...
/etc/shorewall/policy:
#SOURCE DEST POLICY
z1 net CONTINUE
z2 net REJECT
/etc/shorewall/rules:
#ACTION SOURCE DEST PROTO DEST
# PORT(S)
ACCEPT all!z2 net tcp 22
In this case, SSH connections from z2 to net will be accepted by the generated z1 to net ACCEPT rule.
In most contexts, ipset names can be used as an address-or-range. Beginning with Shorewall 4.4.14, ipset lists enclosed in +[...] may also
be included (see shorewall-ipsets[1] (5)). The semantics of these lists when used in an exclusion are as follows:
o !+[set1,set2,...setN] produces a packet match if the packet does not match at least one of the sets. In other words, it is like NOT
match set1 OR NOT match set2 ... OR NOT match setN.
o +[!set1,!set2,...!setN] produces a packet match if the packet does not match any of the sets. In other words, it is like NOT match set1
AND NOT match set2 ... AND NOT match setN.
EXAMPLES
Example 1 - All IPv4 addresses except 192.168.3.4
!192.168.3.4
Example 2 - All IPv4 addresses except the network 192.168.1.0/24 and the host 10.2.3.4
!192.168.1.0/24,10.1.3.4
Example 3 - All IPv4 addresses except the range 192.168.1.3-192.168.1.12 and the network 10.0.0.0/8
!192.168.1.3-192.168.1.12,10.0.0.0/8
Example 4 - The network 192.168.1.0/24 except hosts 192.168.1.3 and 192.168.1.9
192.168.1.0/24!192.168.1.3,192.168.1.9
Example 5 - All parent zones except loc
any!loc
FILES
/etc/shorewall/hosts
/etc/shorewall/masq
/etc/shorewall/rules
/etc/shorewall/tcrules
SEE ALSO shorewall(8), shorewall-accounting(5), shorewall-actions(5), shorewall-blacklist(5), shorewall-hosts(5), shorewall_interfaces(5),
shorewall-ipsets(5), shorewall-maclist(5), shorewall-masq(5), shorewall-nat(5), shorewall-netmap(5), shorewall-params(5),
shorewall-policy(5), shorewall-providers(5), shorewall-proxyarp(5), shorewall-rtrules(5), shorewall-routestopped(5), shorewall-rules(5),
shorewall.conf(5), shorewall-secmarks(5), shorewall-tcclasses(5), shorewall-tcdevices(5), shorewall-tcrules(5), shorewall-tos(5),
shorewall-tunnels(5), shorewall-zones(5)NOTES
1. shorewall-ipsets
http://www.shorewall.net/manpages/shorewall-ipsets.html
[FIXME: source] 06/28/2012 SHOREWALL-EXCLUSION(5)