07-26-2018
Well, I've made some progress but still not totally solved. My two SCO machines I will call now the "physical" and the "VM". At this point I can ping from any machine on the LAN to both the physical and the VM IP addresses or machine names. From the physical machine, I can ping out to any machine on the LAN by either IP address or machine name, which would mean that it is correctly finding my local DNS server for resolution. However, from the VM I cannot ping out to any other machine using either the IP address or machine name. All I get is a "host down" message.
I was unaware that anything needed to be done with the NIC settings in the Host Windows PC in order to use the VM "bridge" mode - please let me know if this is my problem and what I need to do.
I also read somewhere that there is a "route" file in the /etc directory, but it's binary so I have no idea if that is configured correctly in the VM. When I look at the Network settings in scoadmin everything appears to be correct, with similar settings to the physical machine.
Any help as to what I am missing will be greatly appreciated. Thanks!
Edit to add: In the Virtual NIC settings for the VM I saw a checkbox that says "Replicate physical network connection state" that was not checked. I tried shutting down the VM and checking that box. I restarted and it still won't ping out - so that was not the problem. I also forgot to mention that I entered the Gateway IP and the primary and secondary DNS IPs at system installation for the VM. Still not sure what the problem is.
Last edited by spock9458; 07-26-2018 at 12:51 PM..
10 More Discussions You Might Find Interesting
1. Shell Programming and Scripting
Hi,
I am facing a weired problem in my FTP script. I want to transfer multiple files from remote server to local server everyday, using mget * in my script. I also, want to send an email for successful or failed FTP. My script works for file transfer, but it don't send any mail. There is... (2 Replies)
Discussion started by: berlin_germany
2 Replies
2. Solaris
I am using shell script to do secure ftp. I have done key file setup to do password less authentication. Following are the FTP Details:
FTP Client has Sun SSH.
FTP Server has F-Secure.
I am using SCP Command to do secure copy files. When I am doing this, I am getting the foll error
scp:... (2 Replies)
Discussion started by: ftpguy
2 Replies
3. Shell Programming and Scripting
Hi Experts...
Greetings for the day..!
I just want to FTP the files to mainframe system..
my code is not working..and also i need to put the files in a particular directory in a specific naming format...
ftp -i -n ${HOST_NAME} << END_FTP
user ${USER_NAME} ${PASSWORD}
put ${FILE_NAME}... (3 Replies)
Discussion started by: spkandy
3 Replies
4. UNIX for Dummies Questions & Answers
Hi,
I want to run a process on server a, pulling files from server b and pushing it to server c.
Can i do that without dropping the files on server a?
Thanks,
Samit (2 Replies)
Discussion started by: samit_9999
2 Replies
5. Filesystems, Disks and Memory
Hi ,
We are facing a weird problem in our project. we need to send some xml & audio files to a remote FTP server from a Linux box, we are doing this in Perl script using Net::FTP->. Issue here is.. when FTPed the files using Perl scripts, only empty files ( 0 byte) are getting created on the... (2 Replies)
Discussion started by: kishorepotta
2 Replies
6. Shell Programming and Scripting
script for to take files from FTP server to UNIX server and Unzipped that files (1 Reply)
Discussion started by: sunilamarnadh
1 Replies
7. Shell Programming and Scripting
Validating the size of file transferred from ftp server to the local system.
File type: Text file/Flat file
Source System: Windows / Unix Systems
Target System is always: Unix
Mode of Transfer : ASCII
We have generic ftp shell script that transfers the files from different ftp servers. ... (2 Replies)
Discussion started by: jpundalik
2 Replies
8. Shell Programming and Scripting
I am trying to FTP files to a Windows server through my Linux machine. I have setup the file transfer with no problems but am having problem deleting those files from the Linux box. My current non-working solution is below. Any ideas, anyone?? :wall: Please be gentle, I'm fairly new to this... (4 Replies)
Discussion started by: jmalfhs
4 Replies
9. Shell Programming and Scripting
Hi,
I'm new to shell script..I have one requriement like -
In one server have more than one files,I want to ftp those files to some otehr server..
Ex : test1.pdf
test2.pdf
Please suggest me how to do (3 Replies)
Discussion started by: venkaswa
3 Replies
10. Solaris
I need to transfer files from a Windows server to the Unix server and have to run some shell script on it to get the required output.
Is it possible to transfer files from Windows server to unix server through any shell script?
If so can you please help me with the details.
Thanks in... (8 Replies)
Discussion started by: ssk250
8 Replies
HT(4) Kernel Interfaces Manual HT(4)
NAME
ht - TM-03/TE-16,TU-45,TU-77 MASSBUS magtape interface
SYNOPSIS
/sys/conf/SYSTEM:
NHT ht_drives # TE16, TU45, TU77
/etc/dtab:
#Name Unit# Addr Vector Br Handler(s) # Comments
ht ? 172440 224 5 htintr # tu 16 massbus tape
major device number(s):
raw: 6
block: 0
minor device encoding:
bits 0003 specify HT drive
bit 0004 specifies no-rewind operation
bit 0010 specifies 1600BPI recording density instead of 800BPI
DESCRIPTION
The tm-03/transport combination provides a standard tape drive interface as described in mtio(4). All drives provide both 800 and 1600
bpi; the TE-16 runs at 45 ips, the TU-45 at 75 ips, while the TU-77 runs at 125 ips and autoloads tapes.
FILES
/dev/MAKEDEV script to create special files
/dev/MAKEDEV.local script to localize special files
SEE ALSO
mt(1), tar(1), tp(1), mtio(4), tm(4), ts(4), dtab(5), autoconfig(8)
DIAGNOSTICS
tu%d: no write ring. An attempt was made to write on the tape drive when no write ring was present; this message is written on the termi-
nal of the user who tried to access the tape.
tu%d: not online. An attempt was made to access the tape while it was offline; this message is written on the terminal of the user who
tried to access the tape.
tu%d: can't change density in mid-tape. An attempt was made to write on a tape at a different density than is already recorded on the
tape. This message is written on the terminal of the user who tried to switch the density.
tu%d: hard error bn%d er=%b ds=%b. A tape error occurred at block bn; the ht error register and drive status register are printed in
octal with the bits symbolically decoded. Any error is fatal on non-raw tape; when possible the driver will have retried the operation
which failed several times before reporting the error.
BUGS
If any non-data error is encountered on non-raw tape, it refuses to do anything more until closed.
The system should remember which controlling terminal has the tape drive open and write error messages to that terminal rather than on the
console.
3rd Berkeley Distribution January 28, 1988 HT(4)