I bought an HP Elitebook 8460p on eBay and it came with a password-locked Hitachi hard drive which I was told is the original hard drive. I don't know the password for the drive and running the diagnostics tools I see the hard drive is healthy. I tried booting the notebook with Hiren's BootCD 14 and 15 but couldn't find a way to retrieve or reset the password (I don't know, maybe I missed something). I was once told the password is stored somewhere in the computer. How can I unlock the drive? Any suggestions?
Pointing one hard drive name to another disk
--------------------------------------------------------------------------------
I have 2 disk drives - s2d9 & s2d11 on a solaris Unix system
It was mapped so that anything that tried to call s2d9 would be pointed to s2d11 since s2d9 was bad.... (2 Replies)
Hi
I have 2 75GB SCSI hard drives and 2 250GB SATA hard drives which are using RAID Level 1 respectively. I wana have both FTP and Apache installed on them as services. I'm wondering what's the best partitioning schem? I wana use FC3 as my OS, so, I thought I can use the 75GB hard drive as the /... (0 Replies)
Sorry if this is totally the wrong place to post this but I have a question or something rather thats bugging me. I got a new Dell Inspiron laptop the other day and I was expecting it to have 80G on it, well atleast 70 or so after installation of OS and such but after looking carefully yesterday, I... (8 Replies)
trying to setup a sata drive using a sata to scsi adaptor
I have a sata 1TB Deskstar that I had setup before and during shipment from a facilty to another, the disk failed. The handling was not great, lots of throwing boxes, etc. I have a new disk from Hitachi (thankyou Hitachi) anyway, I don't... (1 Reply)
Hi,
Can anyone suggest me any USB Hard Disk Drive which I can connect to Sun Fire V890 and take backup at a quick speed. A test with SolidState USB Hard Drive for backup work was taking writing at 2GB per hour for a 75GB backup.
Regards,
Tushar Kathe (1 Reply)
Any creative ideas on how to wreck / secure clean an hard disk drive before disposal?
dd if=/dev/zero of=/dev/disk_drive?
shred -n whatever -z /dev/disk_drive?
Magnet? (false sense of security)
Fire?
Hammer?
Acid?
Post your thoughts. (10 Replies)
Hi Guys,
I have an external USB Hard Disk Drive on which I have 3 partitions and it works fine under Windows XP but when I am using Red Hat Linux 5 I don't see any icon for this USB HDD. Also I am not able to browse my USB Pen Drive. However, I can use it under Mandrake Linux without any... (4 Replies)
Hi all,
I'm kind of new to programming in Linux & c/c++. I'm currently writing a FileManager using Ubuntu Linux(10.10) for Learning Purposes. I've got started on this project by creating a loopback device to be used as my virtual hard disk. After creating the loop back hard disk and mounting it... (23 Replies)
Hi,
What are the initial checks needs to be done while observing hard errors on one of the hard disk drive.
Thanks,
Babu. (1 Reply)
Discussion started by: lbreddy
1 Replies
LEARN ABOUT REDHAT
hd
HD(4) Linux Programmer's Manual HD(4)NAME
hd - MFM/IDE hard disk devices
DESCRIPTION
The hd* devices are block devices to access MFM/IDE hard disk drives in raw mode. The master drive on the primary IDE controller (major
device number 3) is hda; the slave drive is hdb. The master drive of the second controller (major device number 22) is hdc and the slave
hdd.
General IDE block device names have the form hdX, or hdXP, where X is a letter denoting the physical drive, and P is a number denoting the
partition on that physical drive. The first form, hdX, is used to address the whole drive. Partition numbers are assigned in the order
the partitions are discovered, and only non-empty, non-extended partitions get a number. However, partition numbers 1-4 are given to the
four partitions described in the MBR (the `primary' partitions), regardless of whether they are unused or extended. Thus, the first logi-
cal partition will be hdX5. Both DOS-type partitioning and BSD-disklabel partitioning are supported. You can have at most 63 partitions
on an IDE disk.
For example, /dev/hda refers to all of the first IDE drive in the system; and /dev/hdb3 refers to the third DOS `primary' partition on the
second one.
They are typically created by:
mknod -m 660 /dev/hda b 3 0
mknod -m 660 /dev/hda1 b 3 1
mknod -m 660 /dev/hda2 b 3 2
...
mknod -m 660 /dev/hda8 b 3 8
mknod -m 660 /dev/hdb b 3 64
mknod -m 660 /dev/hdb1 b 3 65
mknod -m 660 /dev/hdb2 b 3 66
...
mknod -m 660 /dev/hdb8 b 3 72
chown root:disk /dev/hd*
FILES
/dev/hd*
SEE ALSO mknod(1), chown(1), mount(8), sd(4)Linux 1992-12-17 HD(4)