08-17-2017
uname -o is quite vague.
uname -sr is better, and
cat /etc/*release is probably the best description of your OS.
Your new device is probably ISCSI, and I think it is not automatically detected. You might need to reboot or use a
procedure to detect it and map it to a disk device.
10 More Discussions You Might Find Interesting
1. Solaris
Hi,
I need to increase a veritas filesystem I have currently mounted on a Solaris 10 server. We can resize the LUN on the NetApp filer no problem. What I need to know is what do I do next on the Solaris 10 server I have so that it will see the increase in size. Do I run 'devfsadm' to... (3 Replies)
Discussion started by: gwhelan
3 Replies
2. Solaris
Hi,
I've just edited this post. I found the solution for this. Thanks. (0 Replies)
Discussion started by: gwhelan
0 Replies
3. Red Hat
hi all,
i have added new LUN to Redhat 5. i have already scanned LUN devices and it is confirmed that Kernel sees the newly added LUN's. i have used /proc/partitions and verified that my disks are there.
However, i cannot find my disk using fdisk -l command. I am not sure what did i... (2 Replies)
Discussion started by: gisu0602
2 Replies
4. Solaris
hi,
what are the steps to detect and configure a new attached lun in Solaris 10.
Is there any difference between cfgadm and luxadm command ?
rgds,
snjksh (5 Replies)
Discussion started by: snjksh
5 Replies
5. Solaris
hello,
i am an oracle DBA and trying to scan a newly created LUN of 200 GB on fiber channel by SAN admin.we have solaris 10 and SANtoolkit is installed.i tried following to get the new LUN at my machine. go /opt/Netapp/Santoolkit/bin and then ./sanlun lun show but i see only the existing... (12 Replies)
Discussion started by: janakors
12 Replies
6. Solaris
Hi folks,
How can I scan newly attached network interfaces to server without reboot?
Is there any command or something to scan without reboot.
Thanks (5 Replies)
Discussion started by: snchaudhari2
5 Replies
7. Solaris
hi!:)
i got a problem....:wall::wall:
i got several disks in my diskarray. I attached new disk to allocate it to the swap space.
The problem is : how to recognise the newly attached disk?
I've one more requirement -:wall:- i want to run dns service on another port number.how can i do... (2 Replies)
Discussion started by: vamshigvk475
2 Replies
8. AIX
Hi,
I have aix 6.1 box. I want to configure iscsi luns from netapp storage. I tried in google but not getting proper solution for that. i m not getting the proper iqn name.
Please share me the steps to complete this requirements.
Thanks in advance. (1 Reply)
Discussion started by: sunnybee
1 Replies
9. Hardware
Hi ,
I have created one new lun in my SAN storage and make it visible to my HP servers , but the fdisk -l output is somehow confusing. Do not know what to do next ----------
fdisk -l /dev/sdo1
Disk /dev/sdo1 (Sun disk label): 64 heads, 32 sectors, 10238 cylinders
Units =... (7 Replies)
Discussion started by: mishra.sankar
7 Replies
10. Linux
Hi
I am not familiar with the linux, but I was asked to create a file system on a LUN from the NetApp that was mapped to the linux server.
The server is runing:
uname -a
Linux localhost.localdomain 2.6.18-92.el5 #1 SMP Tue Apr 29 13:16:15 EDT 2008 x86_64 x86_64 x86_64 GNU/Linux
and now... (6 Replies)
Discussion started by: fretagi
6 Replies
LEARN ABOUT OPENSOLARIS
installboot
installboot(1M) installboot(1M)
NAME
installboot - install bootblocks in a disk partition
SYNOPSIS
installboot bootblk raw-disk-device
The boot(1M) program, ufsboot, is loaded from disk by the bootblock program which resides in the boot area of a disk partition.
The ufs boot objects are platform-dependent, and reside in the /usr/platform/platform-name/lib/fs/ufs directory. The platform name can be
found using the -i option of uname(1).
The installboot utility is a SPARC only program. It is not supported on the architecture. users should use installgrub(1M) instead.
bootblk The name of the bootblock code.
raw-disk-device The name of the disk device onto which the bootblock code is to be installed; it must be a character device which is read-
able and writable. Naming conventions for a SCSI or IPI drive are c?t?d?s? and c?d?s? for an IDE drive.
Example 1: Installing UFS Boot Block
To install a ufs boot block on slice 0 of target 0 on controller 1 of the platform where the command is being run, use:
example# installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk
/dev/rdsk/c1t0d0s0
/usr/platform/platform-name/lib/fs/ufs
directory where ufs boot objects reside.
/platform/platform-name/ufsboot
second level program to boot from a disk or CD
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
od(1), uname(1), boot(1M), init(1M), kadb(1M), kernel(1M), monitor(1M), reboot(1M), rpc.bootparamd(1M), init.d(4), attributes(5)
WARNINGS
The installboot utility fails if the bootblk or openfirmware files do not exist or if the raw disk device is not a character device.
11 Apr 2005 installboot(1M)