Sponsored Content
Operating Systems Solaris Solaris static IP changed (non DHCP) Post 302998697 by hdatontodo on Tuesday 6th of June 2017 09:14:43 AM
Old 06-06-2017
Have you examined the output from dmesg which is written before the syslog daemon starts?
dmesg > somefile looks like /var/adm/messages did: normal operations then a bunch of 390400 kern messages which could have been the results of the network change when the localhost IP changed. The server was booted days ago and used the proper IP. It was in-flight days later that it did this -- on two independent servers at the same time. Each had been rebooted a day from the other after DRPC patching.

Did they DHCP somehow? No log of such and daemon is not running and there are no dhcp config files

Do they boot from local disk or is it SAN provided?
Local disk

Has anyone run sysunconfigure, which would destroy the identity of the server (hostname, network config, host lookup, etc.)
No. All the files /etc/hosts /etc/hostname.nxge0 /etc/netmasks etc untouched with old timestamps. Also bash_history doesn't show commands were entered.

Thanks

Last edited by hdatontodo; 06-06-2017 at 10:30 AM..
 

10 More Discussions You Might Find Interesting

1. HP-UX

HP-UX 10.xx Changing from static IP to DHCP

***Newbie alert*** What's the easiest way to accomplish this? An admin left our company and I have taken over his HP Workstation and moved it to a different location that is on a different IP segment. I have performed a number of google searches but the steps I have followed haven't worked. ... (1 Reply)
Discussion started by: Steelysteel
1 Replies

2. AIX

Static IP getting changed after 24 hours

Hi All, We have an AIX 5.3 server where I have set static IP but after every 24 hrs it is setting some other IP to this machine (I believe some DHCP process is running in the background every 24 hrs). I want to set the Static IP permanent to this machine, can some one help me where the... (10 Replies)
Discussion started by: sirasanibalaji
10 Replies

3. IP Networking

dhcp and static ip conflicts.

I have a USB Wireless Adapter using the rum0 driver. All I want to do is set a perminent static IP for the onboard wired interface elxl0. I can plumb the wired interface up fine on the fly, but when I try to save the static IP over a reboot, I lose the IP address assigned to rum0 from my wireless... (1 Reply)
Discussion started by: ts97783
1 Replies

4. IP Networking

How to configure DHCP to Static IP

I am pretty new to this. My router was earlier configured to enable DHCP, thus my UNIX box is using the dhcp address, i.e. I have to do a ifconfig dhcp hme0 start. Since I am planning to use my NT as a web server, I needed to use the static IP address. How do I configure the unix box to use the... (5 Replies)
Discussion started by: lee30320
5 Replies

5. IP Networking

Switching from DHCP to Static IP

I am trying to write a set of scripts for my Ubuntu 810 Server to allow a user to change from DHCP to a user-supplied Static IP, Subnet, Gateway and DNS Servers. So far I have the following, where $USERCHOICE is a user-entered value in each case: ifconfig eth0 down && ifconfig eth0 $USERCHOICE... (1 Reply)
Discussion started by: cleanden
1 Replies

6. Red Hat

How to know whether my system is using DHCP or STATIC IP

Hi, I am using RHEL 5.1 and i would like to know, how to find the whether my system is using DHCP or STATIC IP with out looking at /etc/sysconfig/network-scripts/ifconfig-eth0 configuration file. Regards, Venkat (3 Replies)
Discussion started by: venkat55
3 Replies

7. UNIX for Dummies Questions & Answers

How to tell if i am using DHCP or Static

Hey guys , YEs this is probably silly for most but i am new to this forum and solaris . i am curious to know if the ip address we have for our solaris server is static or dhcp . how can i tell ? will ifconfig -a tell me this ? or other commands? Thanks in advance (1 Reply)
Discussion started by: xdrivex
1 Replies

8. Red Hat

Purpose of Static IP address through DHCP

Hi All, Could you please explain the purpose of assigning the static IP by using the DHCP Concept. Like by using the clients MAC address we assign the static IP Address. Waiting for your reply. Thanks in Advance. (6 Replies)
Discussion started by: Sharath Kumar
6 Replies

9. HP-UX

[Solved] Static or DHCP IP in HP-UX

Hi, I can find the IP details whether it is Static or dynamic in Linux machine from the location /etc/sysconfig/network-scripts/ifconfig-eth0 configuration file. Can someone suggest a location to find the same in HP UX machines? -Vivek (2 Replies)
Discussion started by: vkk
2 Replies

10. IP Networking

Node switched itself from static to DHCP on reboot issue

I'm trying to figure out what circumstances would cause an Open Solaris 11.2 host to switch itself from a static to a DHCP ip address upon reboot. This has only happened once but is a cause for some concern as this machine will be part of a web server pool. Nothing has changed on the LAN that... (2 Replies)
Discussion started by: SmokeyJoe
2 Replies
TIMED(8)						      System Manager's Manual							  TIMED(8)

NAME
timed - time server daemon SYNOPSIS
timed [ -t ] [ -M ] [ -n network ] [ -i network ] DESCRIPTION
Timed is the time server daemon and is normally invoked at boot time from the rc(8) file. It synchronizes the host's time with the time of other machines in a local area network running timed(8). These time servers will slow down the clocks of some machines and speed up the clocks of others to bring them to the average network time. The average network time is computed from measurements of clock differences using the ICMP timestamp request message. The service provided by timed is based on a master-slave scheme. When timed(8) is started on a machine, it asks the master for the net- work time and sets the host's clock to that time. After that, it accepts synchronization messages periodically sent by the master and calls adjtime(2) to perform the needed corrections on the host's clock. It also communicates with date(1) in order to set the date globally, and with timedc(8), a timed control program. If the machine running the master crashes, then the slaves will elect a new master from among slaves running with the -M flag. A timed running without the -M flag will remain a slave. The -t flag enables timed to trace the messages it receives in the file /usr/adm/timed.log. Tracing can be turned on or off by the program timedc(8). Timed normally checks for a master time server on each network to which it is connected, except as modified by the options described below. It will request synchronization service from the first master server located. If permitted by the -M flag, it will provide synchronization service on any attached networks on which no current master server was detected. Such a server propagates the time computed by the top-level master. The -n flag, followed by the name of a network which the host is connected to (see networks(5)), overrides the default choice of the network addresses made by the program. Each time the -n flag appears, that network name is added to a list of valid networks. All other networks are ignored. The -i flag, followed by the name of a network to which the host is connected (see networks(5)), overrides the default choice of the network addresses made by the program. Each time the -i flag appears, that network name is added to a list of networks to ignore. All other networks are used by the time daemon. The -n and -i flags are meaningless if used together. FILES
/usr/adm/timed.log tracing file for timed /usr/adm/timed.masterlog log file for master timed SEE ALSO
date(1), adjtime(2), gettimeofday(2), icmp(4P), timedc(8), TSP: The Time Synchronization Protocol for UNIX 4.3BSD, R. Gusella and S. Zatti 4.3 Berkeley Distribution November 17, 1996 TIMED(8)
All times are GMT -4. The time now is 12:43 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy